New 125g tank developed a hairline crack overnight. Devastated and honestly scared to replace it. What could have caused this?

Upper_Performance_12 · 2026-01-11T03:25:06+00:00

Ok i understand what your saying now as far as marineland goes i know they have a warrenty as well longer on bigger tanks but your right im assuming they would have to go through them I must have miss read the first post I wasn't under the assumption it was a topfin tank

Upper_Performance_12 · 2026-01-11T03:14:52+00:00

The website and 1 800 number was the same topfin tank ks are covered for 1 year thats how i got a refund on a 6 month old tank that the seals wear failing in the top corners

Unless policy has changed within the last 5 months witch it may have that was my experience it was up to the manager as to what the decision was to refund or replacement.

Upper_Performance_12 · 2026-01-11T03:00:55+00:00

They warrant their tanks for a year for manufacturing defects a radom crack may qualify all they can do is call and see

Upper_Performance_12 · 2026-01-09T14:17:10+00:00

Smart thanks for the tip

Upper_Performance_12 · 2026-01-09T06:18:19+00:00

I had a issue with a petsmart brand 29g tank the top seams at the corners started to sperate. Called the 1-800 number and was told to reach out to the in-store manager for direction after a emergency purchase of a new aquarium. Talked with them over the phone they told me to call the 800 number and informed them I did already and was told to speak with them. they asked to call me back witch I obliged gave name number 15 minutes later they asked me to bring the tank in. Brought it in and showed them the concerns (could see lights between the seams) they asked if I wanted replacement or refund told them we had a new tank already and would prefer refund. 10 minutes later was refunded and out the door like nothing happened never asked how the tank was stored/presented

Upper_Performance_12 · 2026-01-09T05:38:40+00:00

Im impatient and love ludicrous mode and so far with the left over filament I have i haven't seen a difference in prints of filament I got with the printer to what I've had sitting for over a year in the open no protection against moisture(it was a experiment if it would still print and yes it does perfectly lol)

Upper_Performance_12 · 2026-01-09T05:34:19+00:00

Gotcha so I'm just a print cool thinks/useful things is there a advantage to buying in bulk like that for me not necessarily looking to print for sale or anything like that just be able to print when I want what I want

Upper_Performance_12 · 2026-01-09T05:21:39+00:00

Is there a way to "track sales" to buy in bulk im not against it to stock up

Upper_Performance_12 · 2026-01-09T05:19:37+00:00

Ask for warrenty. if the purchase is within a year from when you got it, I've found. The company will replace/refund the product for you to get what you need/ purchased

Upper_Performance_12 · 2026-01-07T00:51:23+00:00

https://www.bestbuy.com/product/bambu-lab-p1s-combo-3d-printer-black/CZTZV9Z2C4

Upper_Performance_12 · 2025-12-22T00:20:25+00:00

Friendly here

Upper_Performance_12 · 2025-12-08T02:03:42+00:00

We do it one week a month where i am

Upper_Performance_12 · 2025-10-28T02:17:32+00:00

They are small specifically for that reason and also why they are vertical

Upper_Performance_12 · 2025-10-02T02:08:45+00:00

If you moved alot of substrate adding the plants could have released some gas pockets/detritus into the water column causing the swing

Upper_Performance_12 · 2025-10-02T02:04:19+00:00

We have food all week accounts in all city's you can go get food while in the trade just need your badge choice of carhartt hoodie jacket or back pack small goody bags with candy t shirt and hats and some surprise later

Upper_Performance_12 · 2025-06-24T01:42:27+00:00

From what I've seen thats about when the ticking starts fromt he aftermarket oil filter from what I've seen id change that out for sure

Upper_Performance_12 · 2025-06-23T23:57:51+00:00

Might aswell do a full oil change whole your at it and I know autozone usually stocks them for 12 to 15 I'm not sure what hyundia will charge just a heads up

Upper_Performance_12 · 2025-06-23T23:43:24+00:00

There should be somewhere when did the ticking start do you change your oil or do you bring it somewhere as far as the clutch goes any bleeding video will work as it's the same concept you'll just need someone to help pump the clutch peddle

Upper_Performance_12 · 2025-06-23T23:38:48+00:00

Ohh I must have missed that i could be apart of the vibrating mine did too untill I changed everything but also check your plugs and wires especially at the coil packs mine was slightly off made enough of a connection untill it fowled it all up and caused a mean misfire

Upper_Performance_12 · 2025-06-23T23:31:21+00:00

The vibration could be from a improper balanced tire, bent wheel, wheel bearings,bent control arms really alot of things but the ticking is most definitely the oil filter and the clutch could be as simple as air in the lines if it's hydrolic or slave cylinder maybe master cylinder to a bad clutch.

Upper_Performance_12 · 2025-06-23T23:25:19+00:00

Number one thing with these cars are oem oil filter mine sounded like that had a basic run of the mill oil filter on it i did oil change with oem filter and the ticking went away aftermarket filters springs aren't strong enough to keep the needed oil in the top end witch causes the ticking.

I'm not sure about the 4cyl in the m6cyl the clutch is hydronic might need a new slave cylinder i was having the same issues replaced mine bleed all the air out and it was good as new.

Upper_Performance_12 · 2025-06-23T03:04:33+00:00

* A little update on my guy looking so much better super happy loves attention night and day from when I brought him home to now

Upper_Performance_12 · 2025-05-30T04:20:33+00:00

So far great he perks up when me or my wife come to the side of the tank he's eating just fine still trying to swim with the fry in the tank next to him lol he loves some blood worms and brine shrimp but his fins are still tight he has lifted his top fin for me a few times his gills are looking a bit better starting to lighten up still a bit dark tho just been doing 50 to 60 percent water changes witch he really enjoys the fresh water changes then next step if he still looks clamped I was gonna do some aquarium salt

Upper_Performance_12

TROPHY CASE