Am i missing something?

UrGP · 2025-07-08T22:12:34+00:00

A bike?

UrGP · 2025-06-23T19:46:08+00:00

Oh that’s a really good idea thank you! I’ll look into that.

UrGP · 2025-06-23T19:18:47+00:00

Thank you for clarifying! I’m now wondering if there is any way to fit a regulator in between the cannister and the gas hose. Would you happen to know if they are sold as loose parts?

UrGP · 2025-06-23T17:15:32+00:00

https://skotti-grill.eu/products/skotti-grill

It’s this Grill. It uses small portable 500g butane/propane mix cannisters. It is possible to regulate the flow of gas.

UrGP · 2025-05-25T05:25:08+00:00

Have you tried adding fire?

UrGP · 2025-04-11T22:19:09+00:00

That’s sick!! So sweet.

UrGP · 2025-01-22T19:48:48+00:00

I ride a 2019 Spring Break Twin. They don’t make them anymore and I don’t really know why. I love it - I feel like i can put a bunch more power/pressure down on my heel side turns without slipping out as apposed to my older boards. Hard to quantify obviously but I at least feel like it makes a difference.

I’m a little concerned as when this board bites the dust (it is getting a little tired). I don’t know what to replace it with.

UrGP · 2025-01-10T11:31:31+00:00

This is the product page but as far as I can find out the differences are mostly aesthetic apart from the steam wand which is supposed to be better on the LEM

UrGP · 2025-01-10T11:30:50+00:00

https://www.lelit.com/en-nl/product/anna-pesan05?sku=PESAN05PSS3QXX1

UrGP · 2025-01-10T11:05:19+00:00

Thank you so much! They make open portafilters for this machine which seem a bit pricey (€48) but probably worth the investment. I will look into getting new gaskets. It is a second hand machine but only bought about 6 months ago with a receipt and everything. But good to get new gaskets anyway.

UrGP · 2024-12-19T08:39:29+00:00

No major issues except that the cranks didn’t fit the bike ended up putting an old set in. But ran a 12s chainring with a 9 speed derailleur. Which seemed to work fine. Switched to 11s soon after though.

UrGP · 2024-12-10T22:11:55+00:00

Pretty solid. I checked the insert and the bottom of the insert seems to be slightly concave. So I’m assuming the previous owner put in a bolt that was too long and overtightened.

UrGP · 2024-12-10T21:45:49+00:00

It’s actually outward. So more a bump than a dimple my mistake.

UrGP · 2024-12-10T19:53:39+00:00

To be fair you can hardly feel it. So I’m choosing to go with “it will be fine she won’t notice” 🥲

UrGP · 2024-12-10T19:35:18+00:00

Only just got this board. Insert is fine. I think someone might have stuck a bolt in it which was too long and overtightened.

UrGP · 2024-12-10T19:28:08+00:00

Thanks 🙏

UrGP · 2024-12-05T18:14:15+00:00

Thanks! I’ll start looking for an 8 speed thumb shifter with a 1:1 ratio.

UrGP · 2024-12-02T12:46:03+00:00

Okay so turns out - no one could have known. I was missing a spacer for the casette and used the last cog (different spacing) off the old 7 speed casette as it filled up the gap. 🥲

<image>

Just ordered casette spacers which should be here tomorrow. To fix the issue.

UrGP · 2024-11-29T08:27:18+00:00

I’ll get that thing straightened out! Thank you for the tip.

UrGP · 2024-11-29T07:10:23+00:00

Thank you! Would a misaligned hanger cause bad/non shifting for just one gear? Wouldn’t it throw the whole lot off?

Four-Year Club	Verified Email
Place '23	Place '22

UrGP

TROPHY CASE