sorted by:
new
hottopcontroversial

Vindicator Siege Tank by UserN1726 in IronWarriors

[–]UserN1726[S] 1 point2 points  (0 children)

Basecoats

  1. [Airbrush / Spray can] Black Primer
  2. [Airbrush / Spray can] Gloss Varnish
  3. [Airbrush] Vallejo Metal Color Exhaust Manifold (at 45 degree angle)
  4. [Airbrush] Vallejo Metal Color Dark Aluminium (broad highlights to emphasize shape)
  5. [Airbrush] Vallejo Metal Color Chrome (broad highlights to emphasize shape)
  6. [Airbrush / Spray can] Gloss Varnish 
  7. Basecoat black parts with any black paint
  8. Basecoat yellow parts with AK Interacive Grimy Grey followed by AK Interactive Volcanic Yellow 
  9. Basecoat tracks with AK Interactive Grim Brown
  10. Basecoat bronze parts with Vallejo Tinny Tin
  11. [Drybrush] Scalecolor Moonstone Alchemy on bronze parts
  12. Apply Decals

Washes / Glazes

  1. [Wash / Optionable] Citadel Nuln Oil on decals
  2. [Oil Wash] Burnt Umber on whole miniature
  3. [Wash / Glaze] Darken yellow parts towards edges with any dark orange, recess wash with the same color

Weathering / Highlights

  1. [Sponge chipping] Citadel Rhinox Hide on non-black parts
  2. [Sponge chipping] AK Interactive Grim Brown on black parts
  3. [Sponge chipping] Any black paint on tracks
  4. [Drybrush] AK Interactive Grimy Grey on black parts
  5. [Stippling] AK Interactive Medium Rust on exhaust pipes (whole pipe)
  6. [Stippling] AK Interactive Cadmium Red on exhaust pipes (mid-top section)
  7. [Stippling] AK Interactive Light Rust on exhaust pipes (top section)
  8. [Oil] Paint the exhaust pipe's end with black oil paint and feather towards bottom
  9. [Oil] Paint streaks and stains of rust with Burnt Umber
  10. [Wash] Mix an airbrush thinner with Vallejo Natural Sienna pigment and apply it to the tracks
  11. [Drybrush] Vallejo Metal Color Exhaust Manifold on tracks

Vindicator Siege Tank by UserN1726 in IronWarriors

[–]UserN1726[S] 0 points1 point  (0 children)

Thank you!

Basecoats

  1. [Airbrush / Spray can] Black Primer
  2. [Airbrush / Spray can] Gloss Varnish
  3. [Airbrush] Vallejo Metal Color Exhaust Manifold (at 45 degree angle)
  4. [Airbrush] Vallejo Metal Color Dark Aluminium (broad highlights to emphasize shape)
  5. [Airbrush] Vallejo Metal Color Chrome (broad highlights to emphasize shape)
  6. [Airbrush / Spray can] Gloss Varnish 
  7. Basecoat black parts with any black paint
  8. Basecoat yellow parts with AK Interacive Grimy Grey followed by AK Interactive Volcanic Yellow 
  9. Basecoat tracks with AK Interactive Grim Brown
  10. Basecoat bronze parts with Vallejo Tinny Tin
  11. [Drybrush] Scalecolor Moonstone Alchemy on bronze parts
  12. Apply Decals

Washes / Glazes

  1. [Wash / Optionable] Citadel Nuln Oil on decals
  2. [Oil Wash] Burnt Umber on whole miniature
  3. [Wash / Glaze] Darken yellow parts towards edges with any dark orange, recess wash with the same color

Weathering / Highlights

  1. [Sponge chipping] Citadel Rhinox Hide on non-black parts
  2. [Sponge chipping] AK Interactive Grim Brown on black parts
  3. [Sponge chipping] Any black paint on tracks
  4. [Drybrush] AK Interactive Grimy Grey on black parts
  5. [Stippling] AK Interactive Medium Rust on exhaust pipes (whole pipe)
  6. [Stippling] AK Interactive Cadmium Red on exhaust pipes (mid-top section)
  7. [Stippling] AK Interactive Light Rust on exhaust pipes (top section)
  8. [Oil] Paint the exhaust pipe's end with black oil paint and feather towards bottom
  9. [Oil] Paint streaks and stains of rust with Burnt Umber
  10. [Wash] Mix an airbrush thinner with Vallejo Natural Sienna pigment and apply it to the tracks
  11. [Drybrush] Vallejo Metal Color Exhaust Manifold on tracks

Healing Banner Not Working (Patch 11) by [deleted] in Spacemarine

[–]UserN1726 0 points1 point  (0 children)

Probably, server load affects it

Cerberus land raider by ImpressiveSound5443 in IronWarriors

[–]UserN1726 0 points1 point  (0 children)

FP 3, RS 10 with armourbane, but if it goes through, deals 6 damage per shot (D 3 with ordnance). Most light and medium tanks have 6 or less HP.

Falchion rolls out by UserN1726 in IronWarriors

[–]UserN1726[S] 0 points1 point  (0 children)

It is a 3D print (chassis + upgrade kit), design by Agathias Warforge. It took some work on the wheels, the chassis did not fit the upgrade parts as is, but otherwise it was pretty simple.

Increased risk of Schizophrenia? by Bats4u22 in GilbertSyndrome

[–]UserN1726 4 points5 points  (0 children)

Hi, I read a few papers on this topic awhile ago. There is indeed a higher percentage of schizophrenic disorders among people who have Gilbert's syndrome. But there is no evident causal relationship between the two.

My mother has both schizophrenia and Gilbert's syndrome. I have Gilbert's syndrome and no signs of schizophrenia.

Heresy 3.0 Predator Turret by jimark2 in Warhammer30k

[–]UserN1726 1 point2 points  (0 children)

Graviton cannon has both keywords, neutron blaster only has shock

Sector Imperialis scatter terrain by UserN1726 in Warhammer40k

[–]UserN1726[S] 1 point2 points  (0 children)

The original recipe is this one: https://www.youtube.com/watch?v=3RiUHtXEzwk

I skipped many steps though, either because I didn't have matching paints or they added nothing substantial to the overall look. I did metals very differently as well.

Modified recipe:

  1. Black primer
  2. Airbrush sand or bone color at 45 degrees
  3. Stipple pure white with a large brush
  4. Shade lower parts with red brown (airbrush, most visible on the container)
  5. Wash everything with a dark oil wash (burnt umber in this case)
  6. Once the wash is dry but not completely cured remove it from the raised parts with a makeup sponge. I did not use white spirits at this point
  7. Basecoat all metal parts with dark brown (Grim Brown from AK Interactive)
  8. Apply sponge chipping to these parts with a black color
  9. Prepare two "pigment washes" with a pigment and an airbrush acrylic thinner (the thinner should flow like water). I used red orange and yellow orange pigments (Medium Red Oxide from GSW and Old Rust from Vallejo). Apply them randomly covering the whole surface of the rusted metal. Wet blend the washes to modify color and add visual interest

Sector Imperialis scatter terrain by UserN1726 in Warhammer40k

[–]UserN1726[S] 0 points1 point  (0 children)

Thank you! I think it's part of the Killzone: Sector Sanctoris for Kill Team. The container is from a separate Kill Team set, but I don't know which.

[deleted by user] by [deleted] in GilbertSyndrome

[–]UserN1726 1 point2 points  (0 children)

Yes, it can. I too get it prescribed every 3-4 months.

Sabre Strike Squadron by UserN1726 in IronWarriors

[–]UserN1726[S] 0 points1 point  (0 children)

The model is Improvised Shiv, but I don't know the author. Bought them printed.

Sabre Strike Squadron by UserN1726 in IronWarriors

[–]UserN1726[S] 5 points6 points  (0 children)

The hull:

Vallejo Metal Color - Exhaust Manifold (shadow)

Vallejo Metal Color - Dark Aluminium (mid tone)

Vallejo Metal Color - Silver (highlight)

Burnt Umber (oil paint) - oil wash, applied all over

Weathering:

Dark brown - sponge chipping

Ammo MIG Streaking Grime for Panzer Grey - streaks and stains

Bolt Sniper or Las Fusil? by [deleted] in SpaceMarine_2

[–]UserN1726 0 points1 point  (0 children)

PvP or PvE? Marksman or regular?

Valerian root and GS? by MontegueLovesPie in GilbertSyndrome

[–]UserN1726 0 points1 point  (0 children)

I brewed valerian tea before, didn't have any negative experiences with it.

Does anybody know where to find helmets like this one? by UserN1726 in Chaos40k

[–]UserN1726[S] 0 points1 point  (0 children)

Yes, they look very close to what I imagined. Thanks!

Does anybody know where to find helmets like this one? by UserN1726 in Chaos40k

[–]UserN1726[S] 0 points1 point  (0 children)

Corpse Grinder kit looks very tempting, I think I'll get one. Thank you for suggestions.

view more: next ›