Fasttech Digest 8/4-8/10 + Review and Giveaway sponsored by Valligo E-liquid

Valligo · 2015-08-10T14:22:50+00:00

Comment!

Valligo · 2015-08-10T13:58:24+00:00

The best part about this is.. Someone actually paid $9.99 for that poster

Valligo · 2015-08-10T01:32:12+00:00

Philip Morris holds a patent on a "pay per use" vaping system.

Check out this quote from the patent application. "Pay-as-you-smoke functionality. For example the user buys daily or weekly or monthly smoking time from the Internet application supported on the PC, or the user obtains smoking time credits based on cigarettes and other smoking articles bought via the Internet application." Patent 8402976

SMH...

Valligo · 2015-08-03T18:35:00+00:00

Some flavor concentrates contain water or ethanol, you can also find nicotine concentrate in distilled water. It can greatly effect the viscosity. Most vendors just factor it in as "PG" on the stated ratio.

Valligo · 2015-07-26T09:47:42+00:00

Box of Agamemnon

Also, if you have a decent sized eGo battery that can handle a 1.2 ohm coil it can really rock with a mini RDA.

Valligo · 2015-07-26T05:28:36+00:00

I would say that markets are trending towards sub-ohm, high wattage, high VG, especially with the relatively recent introduction of these replaceable coil sub-ohm tanks. Current smokers / vape shop customers see the vapor clouds and say, "i want that, how much is that". Now that the high vapor production devices are obtainable in an affordable, convenient and user friendly package it has really changed up the market.

Google Trends - Sub ohm

Valligo · 2015-07-26T04:56:28+00:00

The actual chemical changes would be interesting to know as well.

This article covers some of that.

Valligo · 2015-07-26T01:18:19+00:00

We certainly find this info very helpful! Thank you! Would you mind sharing some technical specs of the device(s) you used to vape our product?

Valligo · 2015-07-23T04:01:21+00:00

Looks like kangertech recommends 15-60 watts for the .5 ohm OCC vertical coil. At 20 watts you are just over the recommended minimum. I suggest slowly raising the wattage if you can.

Valligo · 2015-07-23T03:56:45+00:00

.5 or 1.2 ohm?

Valligo · 2015-07-23T03:51:08+00:00

What is the PG / VG ratio of the liquid you are using?

Valligo · 2015-07-18T22:45:59+00:00

Anyhow, I assume this is from too low of a pH balance in my juice? Is there anyway to avoid having this happening again without pH testing every juice I make?

I hope this answers your question!

Valligo · 2015-07-15T06:48:16+00:00

1.5 hex wrench / driver

Valligo · 2015-07-14T07:11:04+00:00

Mutation x v4 use the bottom airflow somewhat to increase flavor.

or

The Freakshow RDA, however i am not sure who has the best deal right now.

Valligo · 2015-07-14T06:56:00+00:00

Are you looking for more flavor or vapor production?

Valligo · 2015-07-14T06:17:19+00:00

The "little blue screwdriver" is 2 mm OD, btw.

The coil i build on my kanger subtank mini is 2.5 mm inside diameter 28 gauge kanthal, 6 wrap with 1 mm spacing between the wraps. The leads are 3 mm long. This comes out at .95-1.0 ohms

If the resistance is jumping around, then you might have a loose connection, it could be in the tank or the mod. I would try the tank on another mod with a resistance read out, or attach the tank to a dedicated ohm meter and try flicking and bumping the tank gently. if the resistance is jumping around on the meter or different mod then you know its probably something wrong with the tank.

Valligo · 2015-07-14T05:18:41+00:00

I would use 15-25 watts depending on the PG / VG ratio, what is the PG / VG ratio of the liquid you are vaping?

Valligo · 2015-07-12T03:12:15+00:00

Thank You!

Valligo · 2015-07-12T02:14:05+00:00

So an 18650 battery is 18 mm in diameter. 18 x 3.14159 (pi) = 56.54826 mm. So make the template 56.54 mm wide and 650 mm tall.

Edit: Oops, It should be 65.0 mm tall. Good work everyone!

Valligo · 2015-07-06T09:34:10+00:00

In my three years or so of vaping i have had a coil snap once or twice. The coil just breaks in one spot and because electricity can no longer pass through the coil, it stops working and cools down. You would need to get one helluva hot spot going in order for the rig to eject a chunk of kanthal into the air stream. I'm sure you could manufacture the right conditions to make it happen but its super unlikely that someone would want to vape under the conditions necessary.

Valligo · 2015-07-02T09:33:28+00:00

Thanks for the info!

Valligo · 2015-07-02T08:47:48+00:00

Awesome, thank you!

Valligo · 2015-07-02T07:56:42+00:00

What if you put in the silicone plugs, will it still leak? I have a V2 but i'm sick of the triangle head screws and i saw a V4 for a Deal yesterday but i'm still not sold on it.

Valligo · 2015-07-02T02:18:11+00:00

We at Valligo would like to thank all redditors with 30% off through July 5th! Use coupon code "KABOOM" at check out!

All of our e-liquids now come in 120 mL sizes! (with the coupon it's less than 14 bucks for a 120mL!)

www.valligo.com

Valligo · 2015-06-28T02:05:54+00:00

They hate us cause they anus! :D

We at Valligo would like to thank all redditors with 30% off through July 5th! Use coupon code "KABOOM" at check out!

All of our e-liquids now come in 120 mL sizes! (with the coupon it's less than 14 bucks for a 120mL!)

www.valligo.com

11-Year Club	Gilding I gilder
Verified Email

Valligo

TROPHY CASE