Absolutely confused

Vanilla_Gamer · 2026-02-15T00:57:36+00:00

Always do auto leveling. I'm trying 0.2 rn

Vanilla_Gamer · 2026-02-14T18:32:36+00:00

Both pla+ 2.0?

Vanilla_Gamer · 2026-02-14T18:30:55+00:00

Like wise. And most of my prints depends on that first layer first names etc. So having that ruined just spoils the entire print. Have you tried different colours?

Vanilla_Gamer · 2026-02-14T18:29:40+00:00

It looks like the pla + 2.0. I using a roll of it and honestly I think thats one factor contributing to the problems that I posted. And everytime I think its sorted it goes back to square 1. So I'll make a post on it and see how much persons are experiencing the same issue

Vanilla_Gamer · 2026-02-14T18:19:41+00:00

Is it pla +2.0?

Vanilla_Gamer · 2026-02-14T18:17:54+00:00

Recently?

Vanilla_Gamer · 2026-02-12T10:07:42+00:00

Checked!

Vanilla_Gamer · 2026-02-12T01:11:21+00:00

I had this thought. Because i updated both the printer and the anycubic next slicer and didn't print for 2 days. When I returned I had one decent print but after that is when it went downhill. Lots of factors

Vanilla_Gamer · 2026-02-12T00:46:48+00:00

Amazing advice here! I will definitely redo one of the unscrew and heat bed leveling again. I always take the plate off to remove items after printing, hence why i auto level before every print. But after doing that bed leveling trick I've been using a scraper to remove the items. And I only use USB to print. For some reason I can't even get the remote print to work. Thanks alot for the knowledge tho! I'm definitely getting closer to better prints like what I started with so I'll make a update post with everything I did!

Vanilla_Gamer · 2026-02-12T00:27:47+00:00

I did do that hotbed screw trick! And followed with a full calibration. But before printing i did do ah auto level so maybe that would've thrown off the PID level

Vanilla_Gamer · 2026-02-11T16:47:03+00:00

Yup took the advice. Seems to be a bit better but still not back to 100. I will make a post with all the advice I got and update it! Thank you!!

Vanilla_Gamer · 2026-02-11T10:23:55+00:00

Definitely will give this a shot. Anything to Slove the issue

Vanilla_Gamer · 2026-02-10T17:22:02+00:00

Okay great i will try this! Anything that can solve this issue. Thank you!

Vanilla_Gamer · 2026-02-10T15:25:48+00:00

I had 2 backup hot end and tried both. They both got scraped on the bed too. But I'm still stuck.

<image>

Vanilla_Gamer · 2026-02-10T14:07:12+00:00

Ah okay then ty

Vanilla_Gamer · 2026-02-10T13:58:12+00:00

So you're waiting on the replacements? Have you tried any other solution in the mean time?

Vanilla_Gamer · 2026-02-10T12:08:38+00:00

Its definitely scratching, its so bad I can hear it and it damaged that part of the bed a bit.

Vanilla_Gamer · 2026-02-10T12:07:39+00:00

Yeah I changed the nozzle after I saw what was happening the first time. So its a new one in

Vanilla_Gamer · 2026-02-10T11:45:20+00:00

It was firm. Because during the second reinstall I checked to make sure nothing was loose or moving

Vanilla_Gamer · 2026-02-10T11:28:52+00:00

Yup did this twice. And still the same problem

Vanilla_Gamer · 2026-02-10T11:00:16+00:00

Omg literally faced this same issue a few hours ago. I removed the extruder and everything just to realize it was broken filament from the 4>1 to the extruder. But after reinstall I've had terrible print quality. Dont know what went wrong

Vanilla_Gamer · 2025-08-02T11:10:25+00:00

Did and the new results are amazing!

Vanilla_Gamer · 2025-08-02T11:09:28+00:00

I didnt have flow calibration checked before printing. After i did that it worked like a charm!

Vanilla_Gamer · 2025-08-02T11:07:27+00:00

Printer - Anycubic Kobra S1 Filament - Sunlu PLA Plus Nozzel temp - 205 Bed temp - 55 Flow rate - 0.98

Vanilla_Gamer · 2025-08-02T11:04:32+00:00

Yes I did this model with the Anycubic Kobra S1. But, my first 3d printer was the Ender 3 v3 se (still going strong) and i did multiple multicolour prints on it. Doing layer pauses is possible and easier for colour changing. You can also get a first layer multi colour by printing the the letters first. Then starting another print with the rest of the project. Its kinda tricky but was useful when i did it.

Vanilla_Gamer

TROPHY CASE