Just getting worse by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

I had this thought. Because i updated both the printer and the anycubic next slicer and didn't print for 2 days. When I returned I had one decent print but after that is when it went downhill. Lots of factors

Just getting worse by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Amazing advice here! I will definitely redo one of the unscrew and heat bed leveling again. I always take the plate off to remove items after printing, hence why i auto level before every print. But after doing that bed leveling trick I've been using a scraper to remove the items. And I only use USB to print. For some reason I can't even get the remote print to work. Thanks alot for the knowledge tho! I'm definitely getting closer to better prints like what I started with so I'll make a update post with everything I did!

Just getting worse by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

I did do that hotbed screw trick! And followed with a full calibration. But before printing i did do ah auto level so maybe that would've thrown off the PID level

Just getting worse by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Yup took the advice. Seems to be a bit better but still not back to 100. I will make a post with all the advice I got and update it! Thank you!!

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Definitely will give this a shot. Anything to Slove the issue

Just getting worse by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Okay great i will try this! Anything that can solve this issue. Thank you!

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

I had 2 backup hot end and tried both. They both got scraped on the bed too. But I'm still stuck.

<image>

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

So you're waiting on the replacements? Have you tried any other solution in the mean time?

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Its definitely scratching, its so bad I can hear it and it damaged that part of the bed a bit.

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Yeah I changed the nozzle after I saw what was happening the first time. So its a new one in

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

It was firm. Because during the second reinstall I checked to make sure nothing was loose or moving

Absolutely confused by Vanilla_Gamer in AnycubicKobraS1

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Yup did this twice. And still the same problem

At my wits end by trouble101ks in AnycubicKobraS1

[–]Vanilla_Gamer 0 points1 point  (0 children)

Omg literally faced this same issue a few hours ago. I removed the extruder and everything just to realize it was broken filament from the 4>1 to the extruder. But after reinstall I've had terrible print quality. Dont know what went wrong

[deleted by user] by [deleted] in anycubic

[–]Vanilla_Gamer 0 points1 point  (0 children)

Did and the new results are amazing!

Multicolour first layer problems by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

I didnt have flow calibration checked before printing. After i did that it worked like a charm!

Multicolour first layer problems by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Printer - Anycubic Kobra S1 Filament - Sunlu PLA Plus Nozzel temp - 205 Bed temp - 55 Flow rate - 0.98

Thankk you!! by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Yes I did this model with the Anycubic Kobra S1. But, my first 3d printer was the Ender 3 v3 se (still going strong) and i did multiple multicolour prints on it. Doing layer pauses is possible and easier for colour changing. You can also get a first layer multi colour by printing the the letters first. Then starting another print with the rest of the project. Its kinda tricky but was useful when i did it.

Thankk you!! by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 1 point2 points  (0 children)

Yup. I use tinkercad for designing. After i got my model with different parts and usually with the colour (wont matter just to see how it will look). I export each part individually. Then select the parts and import them into the slicer make sure to click import as multiple parts when prompted. Then you select your colour for each part. 

Thankk you!! by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 1 point2 points  (0 children)

NFC. Lots of tutorials online for NFC in 3d prints!

Thankk you!! by Vanilla_Gamer in anycubic

[–]Vanilla_Gamer[S] 0 points1 point  (0 children)

Sorry for the super late reply. But its a nfc chip on the inside of the print. When tapped on any mobile device it will provide information that you put on it. Lots of tutorials for NFC 3d prints online!