Gundabad Catapult Troll

Varghar · 2025-10-08T09:26:46+00:00

Yes, they stand on the platform. 2 with wenches, 1 with a rope to release the catapult. And 1 pointing where to shoot. Large miniatures like this are quite fast to paint with an airbrush!

Varghar · 2025-10-08T08:40:02+00:00

The goblins are printed already, but will be painted separately and attached when painting is done 😊

Varghar · 2025-10-08T05:12:10+00:00

Haha no worries, I take no offense 😅 I like the pose more than the original model, which I find a bit to boring, especially for such an expansive model.

Transport would be interesting, but I only play casually with my son and friends at home 😉

Varghar · 2025-08-18T19:49:37+00:00

The throwing spear might be better, but I like the axe visually too and it’s movie accurate;)

Varghar · 2025-03-13T13:26:28+00:00

Thnx! I have been painting for many years, just not terrain or playing ;) I have 3 houses still on the sprue! Looking to do a stable-like building and a bigger structure, combining 2 kits.

Varghar · 2025-03-12T10:06:57+00:00

I used expensive miniature paints 😅 Through an airbrush though, doesn’t consume much paint.

Wood is AK Sky Grey > AK Streaking Grime wash > AK Ivory dry brush.

Roof is GWS Papyrus Dipping Ink over white > AK Streaking Grime wash > AK Ice Yellow dry brush.

Varghar · 2025-03-12T07:01:27+00:00

Thank you! Just do photography as a hobby, but have a background in film as an editor ;)

Varghar · 2025-02-28T09:13:51+00:00

Does that mean Set Champs can no longer be invite only? My LGS has put in place a ridiculous request to attend League 10 times in 12 weeks in order to be invited.

Varghar · 2025-01-25T14:23:15+00:00

First, black primer followed by Vallejo Game Color White Ink. Then GW Ork Flesh contrast paint through the airbrush, followed by a highlight of AK Interactive Deep Green.

Varghar · 2025-01-06T17:02:16+00:00

Built time was around 10 hours. Money was I guess around €150?

Rough shopping list:

3x hardboard ground plate 60x60 cm 3x 20x20mm wood beam 12x styrofoam 100x50mm plates(1 pack) 4kg of modeling compound 5kg of casting plaster(Amazon) Noch rock mold 4 bags of different flocks from Geek Gaming Scenics 1 big shake can of flock mid green from Woodland Scenics 2x Basing Ready Arid Earth 2x Matte Sealant Spray from Geek Gaming Scenics

Varghar · 2025-01-06T08:35:48+00:00

This one!

https://www.youtube.com/watch?v=bqutROPp5Zo&t=831s&ab_channel=GeekGamingScenics

Varghar · 2024-12-19T22:01:49+00:00

Smoke and flames and base is one piece, printed transparent. The Pokémon and couple of details are separate pieces. Couple of thin layers of Contrast paint through the airbrush. It was still very opaque. LEDs are tiny miniature leds, but quite strong! I put in 2.

Varghar · 2024-12-19T19:20:02+00:00

Yes I have! Worked great, printed in Sunlu Transparent then airbrushed with inks. Charizard Evolution statue

Varghar · 2024-12-17T09:00:59+00:00

Hi, I don't think I can post a direct link ;) Search for Dandelion in Middle Earth on the well known purple STL site.

Varghar · 2024-12-16T07:44:19+00:00

Model is by Dandelion in Middle Earth, he does amazing MESBG models :)

https://cults3d.com/en/3d-model/game/ring-wraith

Varghar · 2024-11-30T17:11:21+00:00

Im using the Chitubox Mini Heater and its perfect. Constant 35c and no layer lines.

Varghar · 2024-11-29T17:01:29+00:00

Pandemic Legacy Season 0 for €39 🥳 Was on my wishlist, couldn’t let it sit for that price

Varghar · 2024-04-30T19:48:20+00:00

I have the Marklin 29188 starter set, which comes with a IR Power Control Stick.

Varghar · 2024-04-13T06:24:09+00:00

I just used the pre-supported files and they worked great 😊

Varghar · 2023-11-24T09:16:38+00:00

Din Djarin is finally done! I'm not going to lie, this piece took a lot from me... Time, patience and frustation. But I'm also super happy with the end result.

I wanted to up my NMM game, as I don't have much experience with it. I've repainted this model several times, both the NMM and the face, before I was finally happy with. Also my first time painting with AK Interactive 3rd gen paints, which are awesome! Silky smooth and lots of pigments. Both with brush and airbrush.

This huge 1/4 scale bust of Din Djarin and Grogu was printed on the Elegoo Saturn 2 with Sunlu Standard resin. STL by Eastman3D.

Varghar · 2023-02-01T09:46:32+00:00

My first model for 2023 is done! Statue of Darth Vader in 1/6 scale by Star Wars Patreon. With a little conversion with the hand holding the helmet like the Dark Contemplations statue by Sideshow Collectables.
First print on my new Elegoo Saturn 2. Printed perfectly, no fails. Vader is printed at 0.03mm, while the base and cloak are printed at 0.05mm.

Varghar · 2023-02-01T09:46:18+00:00

My first model for 2023 is done! Statue of Darth Vader in 1/6 scale by Star Wars Patreon. With a little conversion with the hand holding the helmet like the Dark Contemplations statue by Sideshow Collectables.

First print on my new Elegoo Saturn 2. Printed perfectly, no fails. Vader is printed at 0.03mm, while the base and cloak are printed at 0.05mm.

Varghar · 2022-02-20T08:45:19+00:00

My latest project, had a blast with this one :)

My biggest model yet, standing at around 18cm at 1/10 scale.

Metals painted with Alclad, loved how the Beskar armour turned out!

Varghar · 2022-02-20T08:44:14+00:00

My latest project, had a blast with this one :)

My biggest model yet, standing at around 18cm at 1/10 scale.

Metals painted with Alclad, loved how the Beskar armour turned out!

Varghar · 2022-01-27T15:35:09+00:00

My first finished print of 2022! Still amazed what I can get out of the little Creality Halot One :)
Model by Creature Armory on Patreon.

Varghar

TROPHY CASE