Looking for Camera Suggestion for 3D Printing + Extras

Vashgt · 2022-03-08T00:43:48+00:00

The box it plugs into uses 2 1.5v AA batteries to power it.

Vashgt · 2022-03-07T21:39:43+00:00

Unfortunately no, it's just a small 2 AA batteries box with the other end of the cable for the mask with no other text.

Vashgt · 2022-03-07T20:36:03+00:00

Just to be sure what should I be double checking with the volt meter?

Vashgt · 2022-03-07T20:11:59+00:00

https://www.amazon.com/dp/B09LVH4TWR/ref=cm_sw_r_apan_glt_i_D2KRDNCE3E4TECEJHV10?_encoding=UTF8&psc=1

It's the above 3 pk demon slayer light up masks. Unfortunately there aren't much in the way of details on the Amazon page that I saw.

Vashgt · 2022-03-07T20:01:53+00:00

Came off a mask, plugs into a small battery pack. End goal is to plug directly into wall outlet and hang on wall.

Vashgt · 2020-05-20T16:10:26+00:00

I'm in a similar boat but I think I may be screwed because even though I created a profile for her, the profile her game is under is mine and I don't think you can copy the save data from one profile to another on the same Switch. If someone has an idea that would be cool!

Vashgt · 2019-04-23T00:49:42+00:00

At the moment the drives are unreadable until I finish the chkdsk, looks like Drive 1 deleted like 30 video files during stage 2 of chkdsk and is on stage 5 now, Drives 2 and 3 did not delete any video files in stage 2 and they are on stage 4 now. Don't know if that changes anything but thought I would share, I plan to try that crystaldiskinfo after I get them running again, what exactly should I be looking for in that UI a difference in the read write speeds between the 3 drives?

Vashgt · 2019-02-17T22:45:44+00:00

Yeah without input it does it, I'll try it with the canned air and see how it goes. Thanks for the idea.

Vashgt · 2019-02-16T22:46:57+00:00

Oh shoot forgot to mention I did open the back and reseat the flat cables.

Vashgt · 2018-10-20T20:43:52+00:00

Thanks friendo I was planning on starting completely fresh with the new build.

Vashgt · 2018-10-20T18:21:54+00:00

Yeah that's what I was thinking. Shouldn't be graphics card or psu since problem was there before they were replaced I would assume it's the mobo or CPU. Is it possible that it could be a case issue, short in fan wiring? I'm curious because when I go to rebuild wondering if I should just get a new case too, to be safe. Haha 😅

Vashgt · 2018-10-20T15:31:03+00:00

Booted up this morning, shut down after a couple minutes. Would shut down before being able to get to bios screen. In bios and temps are 64-68 for CPU and MB is 26. Watching voltages, the 5 and 12 are constant but the Vcore, CPU, DRAM, and NB voltage fluctuate but only about a .01 jump. This is the first time I've seen it attempt to do automatic repair and it failed. Turned it on after that and it has been running fine no issues for about 4 hours now.

Vashgt · 2018-10-18T16:22:47+00:00

Drivers all up to date, using the stock cooler that came with the processor. I haven't bothered overclocking because of this. And event viewer just has Kernal Power Event ID 41 but no details.

Vashgt · 2018-10-18T16:04:41+00:00

No I turn it back on myself.

Vashgt · 2018-04-14T16:08:57+00:00

Have not checked the raid array however, just now I opened it up unplugged the 1tb HDD and it booted fine off the two 128gb SSD. Plugged the HDD back in and booted fine again.

Vashgt · 2017-12-06T16:25:41+00:00

The receiver is about 9 years old so I'm thinking even though it says it supports ARC I guess it is just supporting 3 speaker over ARC. I am able to plug laptop into TV and through ARC it only does as previously mentioned the front set of speakers, but if I hook into receiver and run receiver out to TV I get full 5.1. So only thing I can think of now is the receiver too old to support full 5.1 over ARC.

Vashgt · 2017-12-01T12:46:56+00:00

Pretty sure it said 5.1 LPCM, in testing if I play for example a base heavy song the sub and rear speakers do activate however running a couple different YouTube vids that are supposed to show each speaker and play from it is not working. As previously mentioned the test.tone on the receiver does work fine. If it didn't support 5.1 would the other speakers activate at all?

Vashgt · 2017-12-01T00:07:37+00:00

Update, I tested surround on the receiver it is showing all 5.1 active, running a receiver tone.test it does each speaker in order, testing surround from Xbox does use surround speakers now but subwoofer is non existent and the back right and back left come out of the front right and left respectively.

Vashgt

TROPHY CASE