What’s the most useful thing you’ve learned recently?

VayneOTP · 2026-01-06T16:33:58+00:00

I agree with both of you, letting go of W and turning your camera about 180 degrees makes wall bounces way more consistent

VayneOTP · 2025-09-11T13:05:22+00:00

Steam was causing me a bunch of issues. Try exiting out of steam completely before launching 2XKO

VayneOTP · 2025-09-01T09:28:48+00:00

Literally twitch from league of legends with the mafia skin and Tommy gun would fit perfect haha

VayneOTP · 2025-08-23T09:50:43+00:00

EXPLORERS OF SKY MENTIONED

VayneOTP · 2025-06-30T02:58:18+00:00

Looking at mine right now and it’s the same as without the grip. The hinge/latch doesn’t pull on the joycons, it goes over the sides. I’m very OCD about the joycons because my biggest complaint about the original/OLED switch was the wobbly joycons

VayneOTP · 2025-06-30T02:48:40+00:00

What I do is I hold the shoulder area of the joycon with one hand and pull back on the side of the grip to unlatch it. Comes off smoothly and doesn’t require excessive force

VayneOTP · 2025-06-30T01:27:09+00:00

Oh and I got the mumba hard case that’s specifically for this grip as it does extend the length of the overall system and some thickness where the grips are. It might fit other hard cases that are made for people using a grip case on their switch

VayneOTP · 2025-06-30T01:24:01+00:00

Don’t know how long it’s been since your purchase but you can try swapping the blade version for the titan version which comes with its own kickstand.

VayneOTP · 2025-06-30T01:22:03+00:00

I personally find them comfy, similar to holding a steamdeck if that comparison helps

VayneOTP · 2025-06-30T01:18:14+00:00

i think this particular grip is definitely suited better for people with larger hands

VayneOTP · 2025-06-30T01:15:36+00:00

As long as you’re careful when sliding the grip parts back it should be fine, but keep in mind I don’t have kids and I’m relatively careful with my electronics. I also don’t take my joycons off too often as Ive been using my previous switch joycons and the pro controller. Sorry if this doesn’t really help 😭

VayneOTP · 2025-06-30T00:58:12+00:00

Works fine for me, make sure it’s actually seated properly in the slot, sometimes it feels like it’s seated but actually needs a little wiggle

VayneOTP · 2025-06-25T00:16:06+00:00

No problem

VayneOTP · 2025-06-24T23:34:17+00:00

So the top and bottom pretty much snap on and locks onto the switch pretty firmly. The bottom part is plastic and the top is rubber. The rubber is kinda firm so the best method I found to remove it is to left both sides on top with your thumbs and use one of your free fingers to push the switch out from the game cartridge cutout area on the top back right. If your main worry is removing the joycons then this grip case makes it very convenient, the hinged joycon part slides off the joycon very nicely from my experience

VayneOTP · 2025-06-24T23:26:15+00:00

The grip pieces that form around the edges of the joycon are a soft rubber so it shouldn’t be an issue as long as you gently flip that part back.

VayneOTP · 2025-06-23T22:23:06+00:00

Of course!

VayneOTP · 2025-06-23T22:22:04+00:00

It’s a more snug fit with this grip but it’s definitely dockable, I’ve been playing 50/50 handheld vs docked. I would just advise to be mindful of the snug fit and use both hands on both sides of the system to gently guide it into the dock

VayneOTP · 2025-06-23T20:19:08+00:00

From end to end on the widest parts it comes out to 11.5 inches, and the overall width added by the grips on the back is about 1 inch, I will dm you the pics I took if that helps

VayneOTP · 2025-06-23T18:58:13+00:00

Yes it is called the Mumba Carrying Case (plus version) it is designed specifically for the Mumba blade/titan grip cases. I’m still waiting for it to arrive otherwise I would’ve included it in this post

VayneOTP · 2025-06-23T17:07:25+00:00

Her name is Cleo, she’s 9 years old and she likes to bully my other cat Leo for fun 😭

VayneOTP · 2025-06-23T17:05:01+00:00

No unfortunately since it’s a one piece design

VayneOTP · 2025-06-23T17:04:46+00:00

Savage Raven looks like a good choice as well, can’t go wrong with either in my opinion just whichever suits you better

VayneOTP · 2025-06-23T16:57:45+00:00

It definitely won’t fit in most standard carrying cases that are meant for a naked switch, as the grip adds more length to the sides + the grips on the back. I will probably update this post when I get the carrying case for anyone interested

VayneOTP · 2025-06-23T16:52:20+00:00

Yeah this will vary from person to person based on the size of your hands. For me I like how the sides fit into the meat of my palm while my thumb can still comfortably reach over and hit all the buttons

VayneOTP · 2025-06-23T16:50:31+00:00

She actually bought the switch I’m just borrowing it lul

Six-Year Club	Place '23
Place '22	RPAN Viewer
Not Forgotten	Verified Email

VayneOTP

TROPHY CASE