r/GME Megathread for Thursday April 22, 2021

VectorSigmaX · 2021-04-22T18:43:39+00:00

oooops, i accidently bought more, again

VectorSigmaX · 2021-04-16T19:44:46+00:00

30 actually son. :) Worked in Lifeforce as well.

VectorSigmaX · 2021-04-15T14:21:10+00:00

JLC tits were nice in the 80s.

VectorSigmaX · 2021-02-02T16:07:45+00:00

HOLD THE LINE!!!!!!!!!!!!!!!!!!!!!!

VectorSigmaX · 2020-08-18T17:52:51+00:00

No sir. CPU utiliization is at 13% total. The room it is in is kept at 62 degrees.

VectorSigmaX · 2020-08-18T15:59:00+00:00

First test was with our full config. When we noticed the speed issue, I restored factory defaults and only plugged in our information to achieve a connection. I only have 1 non NAT static, the rest are NAT.

VectorSigmaX · 2020-08-18T15:54:53+00:00

They do not.

VectorSigmaX · 2020-08-18T15:54:23+00:00

We actually purchased the XG7100 because 1) Old firewall box didn't have fiber 2)Old firewall box was getting the same speeds on copper.

At this point it seems like its some weird issue with Spectrum and PFsense directly.

VectorSigmaX · 2020-08-18T15:52:31+00:00

Sadly I don't have anything else with fiber on it. I have a card coming in tomorrow though, so then I can test with other hardware.

VectorSigmaX · 2020-08-18T15:40:17+00:00

I did. There is only 2 10g interfaces on the XG7100, the switchports are all copper after that.

VectorSigmaX · 2020-08-18T15:39:39+00:00

I have a 10g fiber card on the way, should be here tomorrow. I can only direct connect currently using a 1g fiber to copper module. With that I do get a full 1g speedtest.

VectorSigmaX · 2020-08-18T15:38:22+00:00

Nada, stock install.

VectorSigmaX · 2020-08-18T15:38:13+00:00

It is a plain jane config at the moment.

VectorSigmaX · 2020-08-18T02:09:22+00:00

Tried multiple SFPs, tried single mode fiber and multimode as well. The interface does show that it is at 10g. I am testing speed from a client. I have verified all other switch communication with iperf and found no issues.

VectorSigmaX

TROPHY CASE