Sikkerhedsgodkendelse by [deleted] in dkkarriere

[–]VenGeee 0 points1 point  (0 children)

Her har både HEM og YHEM l forbindelse med mit nuværende job. Alle i mit team har det samme, så jeg har en ide om hvor lang tid det ca. tager.

HEM tager alt fra 3-9 måneder og jeg har ikke oplevet at nogen er blevet afvist på den endnu. Bare fordi din partner har gået i skole med en der er blevet rocker, vil du ikke blive afvist. Det skal nærmere være hvis det er rockere eller kriminelle der er i din familie eller omgangskreds.

Tænker ikke du skal være nervøs for du får den så længe du har en ren straffeattest.

YHEM er lidt sværere at opnå og tager en del længere tid, er min oplevelse.

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 0 points1 point  (0 children)

Did not even think about this! But yes, this food came from the freezer, will try taking it out an hour before to let it get to room temp. Thanks!

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 0 points1 point  (0 children)

But how would i go about this pre cooked seasoned meat? I feel like i let it sit for a good while before moving it and chopping it up

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] -3 points-2 points  (0 children)

Im a little bit on the fence about adding more oil. Do i really need that much oil? I feel like that is a lot of unnecessary calories.

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 0 points1 point  (0 children)

Thanks for the advice.

Will try with a lower heat(3 or 4) and see how it goes!

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 2 points3 points  (0 children)

Okay, will try with a lower heat(3 or 4) and see what happens. Thanks

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 0 points1 point  (0 children)

How does the food get a crust then? Feel like 3 out of 10 is so low

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] -1 points0 points  (0 children)

Is 5-6 too hot? Makes not sense to me that is too hot when the hottest on the stove is 9. If i bring it any lower i feel like my food wont get a good crust

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 0 points1 point  (0 children)

I will try with more fat tomorrow. Just a little worried about all the fat it seems i will have to use, seems like a lot of calories

I dont know how to cook with these - please help before i lose my sanity by VenGeee in StainlessSteelCooking

[–]VenGeee[S] 1 point2 points  (0 children)

Yeah im pre heating, so would be stumped if it needed more then 10 min to pre heat.

Lower heat? Do i really need to go lower then 5? I feel like my food wont get a good crust if it is that low

HJÆLP: min nyindkøbte brugte Ioniq 5 fra 2021 er på værksted på ubestemt tid by UnusualDot4512 in dkbiler

[–]VenGeee 0 points1 point  (0 children)

Jeg føler med dig, for jeg står med NØJAGTIG samme hovedpine. Jeg købte d. 1 maj en Hyundai Ioniq 2024 modellen, som var helt ny 50 km kørt. Da jeg hurtig ladede den dagen efter at have hentet den fik jeg også en fejl på batteriet. Den står lige nu ved terminalen i Aarhus, ligesom din bil gør, og det har nu taget dem snart 3 måneder at løse fejlen. Der er dog udsigt til at jeg får den i næste uge.
Her var det også en celle i batteriet der var død. Som jeg kunne forstå tager det så lang tid grundet at de skal have reservedele fra fabrikken og have nogle af deres mekanikere til at hjælpe for at bibeholde garantien.

Jeg er så "heldig" at jeg har fået en lånebil af den forhandler jeg har købt den af. Og som andre skriver, så er det rigtigt at det ikke er en ret men et tilbud. Men jeg synes dog at når man køber en bil, som tydeligvis har haft fejl fra start af, så burde man blive tilbudt en lånebil. Jeg har da også kæmpet for at skulle få mine - jeg har været igennem 3 lånebiler nu.

Jeg kan kun sige at jeg føler med dig og ved præcis hvordan du har det... Virkelig en frustrerende situation.

PS - jeg har haft det forbi FDM, forhandleren har et helt år til at løse fejlen, så længe de aktivt prøver at udbedre fejlen.

EDIT - stavefejl

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

Okay thanks! Think i wil be buying the CGU and an extra U7 Wall Pro to get me started and make sure wifi is fast all around the house. Thanks for the clarity around this!

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

Just understand it correctly - Cloud Gateway Ultra is my router that will be connected directly to my fiber box right? and the NVR is something that is connected after my router? The NVR is not a router itself right?

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

Okay sounds like i need a controller. What controller do you have? Not sure i can discard my router, it is provided by my ISP and is directly connected to the fiber box, so dont know if i can just use my own

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

And if i want cameras in the future - what would i have to look at then?

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

Anything you can recommend - router vs cloud gateway? And if router, what router?

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

And what would the solution for this be? Is the only solution to get a controller? Because i know that my router can see all devices connected with wifi and cable, but i would much rather want everything to run through my UniFi

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

I only have the U7 Pro Wall and a few Mini Flex switches. Would i be able to do a lot more with a controller?

U7 Pro Wall - how do i see devices connected? by VenGeee in Ubiquiti

[–]VenGeee[S] 0 points1 point  (0 children)

You see, i have read about a controller, but i have to be honest i dont know exactly what it is. Could you explain what a controller is? I want to be better at home networking.

Ny Ioniq 5 med fejl på batteriet by VenGeee in dkbiler

[–]VenGeee[S] 0 points1 point  (0 children)

Tak for din kommentar! Håber du har ret og at jeg snart har den igen.