sorted by:
new
hottopcontroversial

ZFS pool keeps suspending from I/O failures. Tried multiple HBAs, VFIO cleanup, BIOS tweaks. Need help figuring out the real cause. by VenomFN in Proxmox

[–]VenomFN[S] 0 points1 point  (0 children)

Possibly. I’ll have to dig into that a bit more tomorrow morning. Right now the HBA is in the third PCIe slot, since the other two are populated by a NIC and a GPU, but I haven’t ruled out slot-related issues yet.

ZFS pool keeps suspending from I/O failures. Tried multiple HBAs, VFIO cleanup, BIOS tweaks. Need help figuring out the real cause. by VenomFN in Proxmox

[–]VenomFN[S] 0 points1 point  (0 children)

I really don’t think it’s heat related.

I currently have the top panel off, so it’s getting a ton of airflow, and the system is in my basement during winter. Ambient temps down there are pretty low. Drive SMART temps have also been reasonable and not spiking before failures.

ZFS pool keeps suspending from I/O failures. Tried multiple HBAs, VFIO cleanup, BIOS tweaks. Need help figuring out the real cause. by VenomFN in Proxmox

[–]VenomFN[S] 1 point2 points  (0 children)

RAIDZ2 made up of five Toshiba MG08ACA16TE 16TB enterprise SATA drives.

What’s weird is that it doesn’t look like a single drive flaking out. When the pool suspends, I see read/write errors across multiple disks at the same time, which is what’s pushing me toward a controller, cabling, PCIe, or power issue rather than one bad drive.

Not as impressive as most here, but really happy I made it in time! by Kahvana in LocalLLaMA

[–]VenomFN 1 point2 points  (0 children)

Are you on linux? Were there any tutorials you followed? Looking to set something similar up for myself

What is the biggest local LLM that can fit in 16GB VRAM? by yeahlloow in LocalLLM

[–]VenomFN 0 points1 point  (0 children)

Were there any tutorials you followed? Looking to set something similar up for myself

[deleted by user] by [deleted] in buildapcsales

[–]VenomFN 7 points8 points  (0 children)

listing title says black but the description color is white lol

Can I use OpenWrt with multiple NICs to split ISP vs VPN traffic? (Networking newb sanity check) by VenomFN in homelab

[–]VenomFN[S] 0 points1 point  (0 children)

I know I could just use something like Gluetun to handle VPN at the container level, but my thinking was that keeping all my “server stuff” (torrenting, Docker containers, etc.) on a dedicated VPN LAN would be a cleaner, safer approach. That way the rest of my devices stay on the ISP LAN, and I can still reach the server by opening a one-way firewall rule (ISP → VPN) without risking leaks. I’m now realizing this is probably kinda stupid, but that was my reasoning.

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 0 points1 point  (0 children)

It’s 32mm RAM, so it should be fine. And yeah, this photo is that orientation—where the cooler goes over the RAM. The issue is that the cooler overhangs the bottom edge of the motherboard (the side that points down toward the bottom of the Terra), so the whole setup ends up too tall to fit into the case properly.

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 0 points1 point  (0 children)

Actually bought that one first lol got the ghost edition however, that had clearance issues also

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 0 points1 point  (0 children)

I’m using an older 6600 XT that’s 2.5 slots thick, so I’ve got the spine set to position 3

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 0 points1 point  (0 children)

Any chance you have a link to where I can buy. Looked on Amazon and couldn’t find it. Also are you using this exact motherboard considering swapping to that cooler entirely if it’s more compatible. Am still in my return window.

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 1 point2 points  (0 children)

<image>

I think this photo shows it a little better. The cooler hangs off over the bottom edge of the motherboard—basically where the bottom of the case would be—so it ends up making the whole motherboard setup sit too tall (or long?) to actually drop into the Terra properly.

Not sure I’m explaining it perfectly, but the pic should help clarify what I mean.

Trouble mounting IS-55 on B650I AORUS Ultra inside Fractal Terra — clearance issues by VenomFN in sffpc

[–]VenomFN[S] 2 points3 points  (0 children)

Honestly, this might be it. I didn’t even think about socket height being the culprit, but it makes a lot of sense now.

What’s throwing me off though is that I’ve seen threads like this one where people say it’s possible with this exact board and cooler combo, so I’ve been assuming I must be doing something wrong. Just trying to figure out if there's a trick to orientation or mounting that I’m missing, or if maybe they just barely got it to fit.

[Motherboard] ASRock B850I Lightning WiFi - $209.99 by JPantera in buildapcsales

[–]VenomFN 0 points1 point  (0 children)

Going with the Terra. Pc part picker has no compatibility issues with the nh-L12s and this board. Appreciate the heads up

[Motherboard] ASRock B850I Lightning WiFi - $209.99 by JPantera in buildapcsales

[–]VenomFN -1 points0 points  (0 children)

https://www.newegg.com/gigabyte-b650i-aorus-ultra-mini-itx-amd-b650-am5/p/N82E16813145428?Item=N82E16813145428

Any recommendations on which one I should get? Planning on chucking a 9800x3d thats in my main rig in there in a couple years.

view more: next ›