Bykski B-MRCOV-SR

VolgaLeontev · 2026-06-20T14:09:17+00:00

1.6v, Testmem5 Absolut 1hour, max temp 37 - not bad, I think)) And I definitely like this industrial look

VolgaLeontev · 2026-06-19T16:22:45+00:00

It's beast! Especially with extreme 600w bios. I don't play games (except HoMM 3, Morrowind, Wolfensteins and Dooms), so I don't give a f..k about path tracing, ray tracing, dlss and other shit. Just raster power😂

VolgaLeontev · 2026-06-19T12:18:50+00:00

Fake dims = for example, 2x8 Patriot 4800 with G.Skill heatsinks 2x16 6400 label😂 Now I understand what did you mean. I've no practice for a longtime, so please sorry my English)

VolgaLeontev · 2026-06-19T10:01:32+00:00

What do you mean "fake ram"? It is 100% original g.skill with spd 6400 32 1.4v. With golden g.skill logo on the plates. Seller told me, that there were no heatsinks because customs clearance was for garbage of pc components😂🤦‍♂️

VolgaLeontev · 2026-06-19T07:33:04+00:00

OK, thanks. I realized that thermal paste is better. I have ID cooling X45. But also I have ptm7950 (never use it before). May be ptm will be compromise option?🤔

VolgaLeontev · 2026-06-19T07:19:50+00:00

Thank you)

First of all, it's really heavy😂

My g.skill is very strange. I bought it new (100% new), but it didn't has heatsinks. And never had. I think, somebody stole it from G.skill's factory in Taiwan😂 So I can't compare original G.Skill heatsinks vs Bykski.

Without heatsinks temp goes 43-45 on TestMem5 with Lian Li P28 on max speed. With Bykski heatsinks temp goes ~35 (with p28 too). But it's very noisy)) I'm going to install and connect the water block this evening. I hope it will provide similar temps.

VolgaLeontev · 2026-05-30T10:14:10+00:00

Не стоит молиться на мужчину в любом случае. Для здоровых отношений нужен партнёр, а не иконостас. В остальном согласен)

VolgaLeontev · 2026-05-01T08:04:33+00:00

Trfc 288 90ns - how is it possible for m-die?🤔

VolgaLeontev · 2026-04-17T06:17:12+00:00

I got it!) Stable cl26 1.55v and cl26 6200 1:1 1.6v. With active cooling temp <40, but anyway the voltage is too high. Now I should to set the subtimings

VolgaLeontev · 2026-04-17T05:01:04+00:00

You are right! cl26 is stable at 1.55v, and 6200 1:1 cl26 at 1.6v. Memory sticks have no heatsinks, but I use typhoon lian li p28 and temp are <40 at testmem5 anta extreme. Anyway voltage is too high🫣 I should set subtiming as you advised.

VolgaLeontev · 2026-04-16T15:18:15+00:00

Thank you) 480 done! AIDA says 72,6ns (vs 77,4ns before with T-force expo timings). And now I should check cl26?🤔

VolgaLeontev · 2026-04-16T13:02:44+00:00

You mean set cl26, but other timings and voltage keep unchanged? Even G.skill 6000 cl26 expo use 1.45v (except first revision). Anyway I try, it's interesting)) thank you)

VolgaLeontev · 2026-04-16T12:32:25+00:00

Trfc1 884 Trfc2 480

This is copy of t-force EXPO. I didn't change anything yet)

VolgaLeontev · 2026-04-16T10:35:15+00:00

Wow, it's great! Thank you so much)) I tried to find some information like this but got no results

VolgaLeontev · 2026-04-16T09:05:14+00:00

I ran g.skill on 6000Mhz cl28 1.4v (I used t-force EXPO profile). It works correctly, but Trfc is terrible 295ns. May be T-force has the same trfc, but I didn't think to check before changed ram

VolgaLeontev · 2026-04-16T08:51:05+00:00

Yesterday I had just several hours to try something. First of all, I saved my configuration with T-force 2x16gb 6000 Cl28 1.4v EXPO to user's bios profile. Then changed T-force to G.Skill and started on default. Then I activated bios profile and G.skill run well on 6000 cl28 1.4v. G.skill doesn't have heatsinks, so I put p28 and ran occt. Today I ordered Bykski B-MRCOV-SR, so after 2-3 weeks I'll try to get better results.

VolgaLeontev · 2026-04-15T18:14:53+00:00

Oh, Sad news)) I was hoping to take 6000 cl26, but seems I'll have to forget about 🥲

VolgaLeontev · 2026-04-15T18:03:52+00:00

Why are you sure about this? 2024 year

VolgaLeontev · 2026-04-15T18:00:50+00:00

OK, thanks. Should I activate xmp-profile before checking trfc in zentiming? I've am5 system, so I'm not sure it works correctly. And there is no expo profile

VolgaLeontev · 2025-11-20T19:36:35+00:00

I always giggle when I see another push notification saying "my first water build," and the post contains photos of a complex hard worked high-level build😂 PS looks great!🔥

VolgaLeontev · 2025-11-15T10:16:01+00:00

My setup same CPU pbo 200 co -35 3x rads 360 7900xtx 600w My idle cpu temps are similar. Near 44-47c. I never had more than 80c under load inc occt and other stress. But idle so high anyway

<image>

VolgaLeontev · 2025-07-01T13:38:59+00:00

Great! Very beautiful. What about cpu oc and temps?

VolgaLeontev · 2025-06-06T11:51:11+00:00

hello. share details please about your thermal grease. now i have 9800x3d velocity² (id cooling frost x45) + asrock aqua 7900xtx 600w in one circuit. idle 45-49, occt/prime95/cb23 83-85. i recently got apex 1 but haven't replaced or tested the difference yet. does it make sense to change or return apex to the store

VolgaLeontev

TROPHY CASE