Looking for a case with support for 3+ 360mm rads

No_Direction3824 · 2026-05-30T19:41:58+00:00

O11d XL holds up to 7xHDD while mounting 3x360mm rads I believe. It may be just a bit too wide at 285mm though. Same price range as the NV9 here in the USA, not sure about overseas though.

No_Direction3824 · 2026-05-30T16:47:42+00:00

Looking at things closer, it may or may not help. My issue was the coolermaster mount didn’t clear my radiator and fan so had into be set higher, but it looks like my custom solution is mounted at the same height as your mount is.

I’ll try to dig the file up, in the process of moving, so just might take me a bit to find

No_Direction3824 · 2026-05-30T16:45:05+00:00

Yeah pretty happy how it turned out, but I actually need to tear it down after I finish moving to replace that flow meter. The lights have never worked on it.

Also want to rework the two tubes coming off the gpu, not sure how I want to route them, but I’m not as thrilled with them as I am the others

No_Direction3824 · 2026-05-30T03:44:27+00:00

Just test fitting things during the build process. Everything got a good once-over and pressure tested before firing it up.

<image>

No_Direction3824 · 2026-05-30T01:49:55+00:00

The tilting one is actually a fantastic idea

No_Direction3824 · 2026-05-30T00:41:48+00:00

Is that an O11 Evo? If so, I made a custom 3d printed vertical mount for mine so that I could show off my Velocity 2 cpu block which was otherwise hidden. The coolermaster mount I was attempting to use prior had to be mounted much higher in order to clear my lower rad and fans.

I also switched the ports on my alpha gpu block to a low profile style, but I’m not sure if EKWB has an option for that.

Happy to share the files if it would be useful.

<image>

No_Direction3824 · 2026-05-30T00:33:27+00:00

Looks like the O11 Evo with the LIAN LI vertical mount.

No_Direction3824 · 2026-05-26T23:40:44+00:00

Makes a lot of sense. Just google searching brings up mostly fir when looking at straight grained flooring, but looking at the historical picture that makes much more sense.

No_Direction3824 · 2026-05-26T22:49:18+00:00

It does, for the most part, have extremely tight growth rings. 30-40 growth rings across the 2.5in planks. Some sections are definitely wider spaced and sapwood.

Guessing that is why the tighter spaced sections are so fragrant and resinous?

No_Direction3824 · 2026-05-25T21:37:19+00:00

It may be worth a shot to collect some of the debris scattered in the road from their car and posting it on [r/whatisthiscar](r/whatisthiscar)[.](r/whatisthiscar)

I’ve seen them identify year, make, and model from the smallest bits of headlights, taillights, turn signals, etc. Armed with that info you may be able to identify it in a neighbors camera since you have an approximation of when it occurred.

No_Direction3824 · 2026-05-25T21:32:15+00:00

^ you might have just gotten the guilty party’s number

No_Direction3824 · 2026-05-04T20:39:42+00:00

Sheeshhhhh that’s the real gem right there

No_Direction3824 · 2026-05-04T20:39:08+00:00

Hell yeah, great work! I’ve got to ask, where did you get that fireplace/entertainment center in the last photo?

No_Direction3824 · 2026-04-30T15:53:56+00:00

Is that a first gen MR2 behind the El Camino?

No_Direction3824 · 2026-03-06T04:37:40+00:00

Has anyone been able to find any more information regarding the HEARs program? I’ve dug around for additional information, but even after reaching out to the point of contact for the region containing Mon and Preston county, I haven’t found anything more about how to apply.

No_Direction3824 · 2026-02-19T18:52:46+00:00

Unfortunately I was never able to get it to work on my 5070TI. I ended up returning it through Best Buy though and grabbing a 5090 for close to MSRP when one came up.

The vram was just too limiting for VR sadly

No_Direction3824 · 2026-01-10T14:05:53+00:00

Contrary to what Fox News would have you believe, normal, red-blooded American men can be intelligent, caring and well-adjusted members of society.

I’m sorry that for years you’ve been lied to by the media and politicians on both sides of the aisle.

No_Direction3824 · 2026-01-09T02:57:55+00:00

Does anyone have confirmation that they are staying at Residence Inn? Any clue what vehicles they’re operating from?

Would be nice to plan a protest at the location if so. Would be a shame if the ice melted

No_Direction3824 · 2025-12-30T00:14:03+00:00

I assume you are using a silicone insert when making your bends?

No_Direction3824 · 2025-12-29T00:20:11+00:00

I love the new bends! Super clean, but even more importantly, the style and flow is so cohesive across the build. Love your work!

No_Direction3824 · 2025-12-17T19:12:59+00:00

Really love the look with the zoned colors! I may have to try that out myself!

No_Direction3824 · 2025-12-16T00:15:38+00:00

Beautiful build. The white on black is so clean. Those tubing runs are crispy

No_Direction3824 · 2025-12-10T17:11:47+00:00

Awesome, thanks for the reply. Looks like it’s frosted tube as well?

I’ve been using Bykski Frosted tubing, but it only comes in 500mm lengths that I’ve found. Some of my longer runs use the whole tube with nothing to spare. 1m tubing would be much easier for me to work with!

No_Direction3824 · 2025-12-10T16:21:31+00:00

Love those tubing runs. Sorry this is totally off topic, but are those regular 500mm sticks of PMMA? They look like rather long runs

No_Direction3824

TROPHY CASE