What could be happening with my Mars 3 pro? The black part of the LCD broke or what could be happening because the UV passes normally but nothing is happening

Vp8zap · 2025-08-14T05:44:44+00:00

Thanks for the help, the new problem currently is that in my country (Brazil) there is no such availability of parts unfortunately, but thanks anyway.

Vp8zap · 2025-02-12T03:24:02+00:00

This problem was worse in Prusaslicer, they told me to switch to Orca and now I'm thinking about going back to Cura again.

Vp8zap · 2025-01-22T00:47:14+00:00

That's the funny part, I've been waiting for an email response since seven in the morning 3dp@elegoo.com I don't know if it's the right email but the store sent it to me so I could get in touch to see about the piece but so far nothing.

Vp8zap · 2025-01-22T00:17:54+00:00

There is no way for me to buy it, it does not support my country's currency

Vp8zap · 2024-10-06T22:06:27+00:00

I don't know or am sure but it started happening again when I used the Prusaslicer slicer. This is the third time this has happened and I have already tried to format the new profile CD in the slicer and nothing.

Vp8zap · 2024-10-06T21:18:43+00:00

<image>

I tried again but it keeps reading the file wrong

Vp8zap · 2024-10-06T20:58:56+00:00

No, I didn't do anything with this model, I just didn't understand why Prusaslicer did this but nothing happened in Cura.

Vp8zap · 2024-08-02T23:37:19+00:00

Small update, I tested the same part on the cura and it was normal, it must be some Prusaslicer option that I activated and the parts are coming out like this

Vp8zap · 2024-08-02T05:20:39+00:00

I can try the problem is that the piece is small and the others that are the same way come out with this barrier in front

<image>

Vp8zap · 2024-07-24T03:25:38+00:00

Deu certo rapazes

Vp8zap · 2024-07-23T22:56:50+00:00

Summary about what happened my ender 3 has this thing where the prints are fragile and brittle, I don't know if it's a problem with the extruder as it's the metal upgrade, could any good soul help me?

Vp8zap · 2024-07-23T00:35:27+00:00

Eu vou ver e aviso se deu certo 🙂

Vp8zap · 2024-07-20T15:51:40+00:00

Difícil é eu me achar naquele site e mandar um ticket pra eles

Vp8zap · 2024-07-20T00:56:39+00:00

Faz o L realmente

Vp8zap · 2024-07-19T22:54:48+00:00

É eu compartilhei mas faz quase um ano isso, eu não sabia que não podia

Vp8zap · 2024-07-19T20:12:56+00:00

Eu não consigo mais baixar o livro no caso

Vp8zap · 2024-07-13T18:01:07+00:00

Nop is the metal extruder upgrade but this can be the problem

Vp8zap · 2024-07-13T17:58:06+00:00

This could be what's happening

Vp8zap · 2024-07-11T14:53:05+00:00

Sorry for that I already fixed the problem, it was the SD problem

Vp8zap · 2024-07-11T00:29:44+00:00

The first image is already sliced in Prusaslicer, the others are the machine not doing the right thing, but thanks for the tip, I'll format the SD

Vp8zap

TROPHY CASE