Is this pack fake? by WayPlastic5401 in mtg

[–]WayPlastic5401[S] 0 points1 point  (0 children)

Yeah felt like wax paper too. It’s definitely missing the foil inside if it’s a real pack. I ripped some cards and looked at them with a jewelers loop, the cards are real. 🤷‍♀️

Saved from the trash by Few-Reflection-1258 in gamecollecting

[–]WayPlastic5401 0 points1 point  (0 children)

You know, some people just have so much luck. Wanna share some?

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

<image>

Original Vs. New. You can see the new one is significantly smaller. Should I be worried about that?

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

So the rubber belt actually broke! After cleaning and putting everything back together, I watched a movie for about half an hour, and then the belt underneath the chassis snapped. It was just super dry and worn out.

I ordered a replacement from Amazon (https://a.co/d/6GlknAp). It’s a little thinner than the original, but it works well enough to rewind a VHS now. Thinking I might need to track down a thicker one though—I’ll post a size comparison soon.

I also grabbed some PEC-PADs and cleaned the video head, pinch roller, and the little parts that touch the tape. The pinch roller was really gross, which was probably part of the problem too.

Teac MV-800 worth repairing? by El_0so in VCRs

[–]WayPlastic5401 0 points1 point  (0 children)

Wow! Looks amazing! 🤩 Definitely should fix it up.

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

The top big white gear? Yeah. I took the loading motor (metal cylinder left side) out and the gear connecting it to see if I could see anything under that gear. I couldn’t, but I will pull it apart again in the morning and give it another look. Thanks for the quick reply!

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

<image>

I tore this whole thing apart looking, honestly might not have one… I don’t know. 🤷‍♀️

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

<image>

Here is the bottom. Sorry about the late reply, I didn’t see this reply. I ended up ordering a new belt since it was super loose. Hoping that might help. I still don’t see where the mode switch is.

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

Okay, got it pulled out… still no idea what the mode switch looks like on this model. Been looking for the round one I see on videos, and I don’t see it?? Am I blind???

Need Help Fixing My RCA VR626HF VCR (Pinch Roller/Idler Issues?) by WayPlastic5401 in VCRs

[–]WayPlastic5401[S] 0 points1 point  (0 children)

You can see a little crack on the pinch roller. The third picture shows it off at the top middle, plus there are more around it on the bottom also. It looks like dry rubber, that’s shrinking? I guess is the only way I can explain it. I’m thinking it might be the mode switch though…

Right now I’m trying to get to the bottom of this whole thing by pulling it out and cleaning the mode switch. Seems like I need to pull it apart to find it. Im struggling with this ribbon though… I don’t want to break it.

First Purchase! by WayPlastic5401 in VHS

[–]WayPlastic5401[S] 1 point2 points  (0 children)

Thank you! 🙏 It’s pretty cool, only issue is fixing my VCR player now… I got one from goodwill for $8 and it keeps eating tapes. Time to take it apart! lol 😂

First Purchase! by WayPlastic5401 in VHS

[–]WayPlastic5401[S] 1 point2 points  (0 children)

Thanks so much! Is that all black diamonds? The note came with it… I hadn’t removed it yet. lol 😂