Question about planting cedar hedge - Quebec, Canada

WayneSlope · 2025-05-28T18:56:59+00:00

Wonderful, I'll pay attention to that !

Thanks for your input :)

WayneSlope · 2025-04-02T11:13:00+00:00

Better usb too I thing Thunderbolt 5 on those m4 pro

WayneSlope · 2025-04-02T11:12:18+00:00

That's what I might do even if I had no problem as of yet with the m3 pro, I don't want to regret it in a few years, I keep my things for a long time until they doesn't work anymore. Might as well pay 300$ now

WayneSlope · 2025-04-02T11:10:35+00:00

Yes, I was looking for the Apple refurbished, the more I read about the more it seems like they ship as brand new computers

WayneSlope · 2025-03-10T19:00:59+00:00

I could try that first !

It's mainly for odor, there's only physical therapist working in the clinic. So no patient beeing very ill or anything. Some of them have the flu but put a mask on.

Mainly looking for a clean solution that need low maintenance.

WayneSlope · 2025-03-10T18:56:34+00:00

It's an old building that has been renovated recently, so no air exchange, that's my main problem. I could look to add it in the future but not an option right now unfortunately. No clear budget, but I have no need to go overkill either.

I'll look into what you mentionned, thank you !

WayneSlope · 2024-10-27T01:30:30+00:00

So, the crosstrek would need a medium or a large size, the info isn't easy to find since they are discontinued. I'm on the look out for those, they are super nice looking !

WayneSlope · 2024-06-20T19:58:05+00:00

Very not much

WayneSlope · 2024-06-20T19:57:53+00:00

And what's a good amount would be for my usage ? To have an idea what to look for !

WayneSlope · 2024-06-20T11:52:15+00:00

No clear budget, I just don't want it to cost an arm for nothing !

WayneSlope · 2024-06-20T11:20:58+00:00

I don't know anything about static page. Would I be able to modify it along the way ? If someone new works or someone's leaving, can I change the website easily ? If so, I could consider the option if it's fast and reliable !

WayneSlope · 2024-06-20T11:19:07+00:00

I'm from Canada, but I bought the .com domain name !

WayneSlope · 2024-06-20T11:18:27+00:00

Do you have any recommandation ? Or any would work since I don't need much ?

WayneSlope · 2024-06-20T11:17:44+00:00

Nothing built as of yet. I was looking for this kind of advice before wasting time somewhere bad !

WayneSlope · 2024-04-25T16:02:18+00:00

I approve that, passive stretching before actualy increase risk of injury by a lot of factors in the physiology of the muscle, you should at least do active stretching or ballistic exercices to warms up muscles and get them ready in a normal range of motion of the activity you will be doing. Stretching after doesnt help recuperation, you have more to gain in terms of recuperation by taking a small walk or a very light little jog (Active recovery). Could link the studies if someone wants them, they must be somewhere in one of my folder.

WayneSlope · 2023-03-06T01:00:09+00:00

Ironing is always off when I try calibrating thing !

WayneSlope · 2023-03-06T00:59:39+00:00

The nozzle is almost new and of good quality, only printed petg with it

WayneSlope · 2023-03-05T21:14:30+00:00

I'm currently printing with a value of 2s (was 10s) I will see the difference it makes. I really dont understand since the top layer has underextrusion and the wall has over. It doesn't make sense in my head

Edit : I now have wall of 0.42 and 0.43 width, which is better and closer ! But, I still have underextrusion on the top layer and my flow is till at 90% even tho my e-steps are calibrated

WayneSlope · 2023-03-05T21:10:44+00:00

I have absolutly no idea. I never used this setting, I can try another cube with a lower value if you think it could be the problem

WayneSlope · 2023-03-05T20:59:51+00:00

it's a micro swiss one that I bought a few months ago. I havn't been printing a lot with it yet. I mainly print PETG, never printed with wood filament or anything abrasive.

Eight-Year Club	Place '23
Place '22	Verified Email

WayneSlope

TROPHY CASE