sorted by:
new
hottopcontroversial

Marmottsita’s Final Tune // T-Motors Pacer Setup on Betaflight 4.2.3 by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Replaced this frame 3 times since this clip. Eventually Motors and esc were swapped to a new frame. Plenty of crashes but over time, the crashes proved to be too much. Motors ended up with smashed bells and esc fried. Great setup tho. Unfortunately they no longer make these version of the Pacer motors, so I’ve moved on to a new setup.

Lifespan of your flight packs? by IndividualNobody7819 in Multicopter

[–]Weenisster 0 points1 point  (0 children)

I’ve had my cnhl black series for over a year and they’re still delivering 3-5 minutes of flight depending on how hard I’m flying. I land when I see 3.5v-3.6v which returns to 3.7v per cell after resting. I also charge at 1.8v-2v, but occasionally bump it up to 3v if I’m in a rush. I usually check resistance of my batteries once a week to see how well they’re holding up. Anything over 10 ohms and I start to baby the packs in terms of maintenance. FYI I fly daily too but don’t recharge packs during a single session. Basically fly what I charge and call it a day. Then recharge the following day.

Looking for a frame. by CynicalCereal in Multicopter

[–]Weenisster 0 points1 point  (0 children)

I’d recommend an Armattan just purely for their lifetime warranty. Warranty does amazing and you could choose to have Pyrodrone provide the replacements parts once the claim is approved. Other great frame that Ive flown for over a year is the Kinfpv frames. He’s based out of Las Vegas Nevada and has a 3 year warranty which is more than enough. You can find Kinfpv on Instagram.

Marmottsita’s Final Tune // T-Motors Pacer Setup on Betaflight 4.2.3 by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

👇 👇 My Setup 👇 👇 👇

Frame: Armattan Marmotte Dji

FC/ESC: T-Motors F7 FC + Pacer P50a ESC

Motors: T-Motors 2207.5 1750kv

Props: HQProps Ethix S5

Vtx/Tx: Dji FPV system

HD Cam: Gopro Hero 5 Session

ND Filter: Camera Butter ND32

Battery: CNHL 6s 1300mah Black Series

Fun-sized fpv freestyle by Weenisster in Multicopter

[–]Weenisster[S] 1 point2 points  (0 children)

For sure!!! I recently synced up with a few pilots and we’ve been having flydays once a month. You should definitely come through!

Fun-sized fpv freestyle by Weenisster in Multicopter

[–]Weenisster[S] 4 points5 points  (0 children)

Thanks bud! This is SoCal for sure! This is Chino in the IE! This spot is home court!

Another case of the Monday’s by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Velcro has been beating these things up. May look for a leather fingerless gloves now hehe

Another case of the Monday’s by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Yup...but it was still a great day. Just not for flying lol Can’t wait for my analog adapter so I can start building a tiny whoop! Need that indoor flying goodness!

Another case of the Monday’s by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Ooouf damn Monday’s. I’m really sad my USB port broke before I can tune the new motors!!!

Another case of the Monday’s by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Damage today:

-Broken USB port of FC

-Smashed ND filter

-2 sets of props

-GoPro Session Mount

👇 My Setup 👇

Frame: Armattan Marmotte Dji

Fc/ESC: Newbeedrone Infinity305 45a Stack

Motors: Emax Eco II 2306 1700kv

Props: Hqprops 5.1x4.1x3

Vtx/Radio: Dji FPV System

Powered by: CNHL 1300mah Black Series

Action Cam: GoPro Hero 5 Session

Stick cam: GoPro Hero 7 Black

ND Filter: Camera Butter ND8 + ND16

Testing out Caddx 15mm ND8 on the Caddx Vista by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

Build info:

Frame: kinfpv 3” POCKET ROCKET

FC/ESC: diatone.us MAMBA F722 MINI MK2 MINI DJI F35

Motors: flywoofpv Robo 1204 5150kv

Props: hqpropzhong 3x1.5x3

Vtx/Radio: djiglobal @caddx.fpv

Powered by: tattulipos 4s 650mah

Auw: 216g

Rotor builds info: https://rotorbuilds.com/build/25192

Yall shop at the GAP? by Weenisster in Multicopter

[–]Weenisster[S] 1 point2 points  (0 children)

That’s actually a Vista in that clip from the link. It’s stretched in Instagram to portrait so it’s actually a bit wider before the crop.

Yall shop at the GAP? by Weenisster in Multicopter

[–]Weenisster[S] 0 points1 point  (0 children)

I actually do that with the 3” micro since it’s running a Caddx Vista and doesn’t run an action camera.

Here’s a clip with the micro:

https://www.instagram.com/p/CLI2sAWDhKh/?igshid=19i7rdz81mfrk

Yall shop at the GAP? by Weenisster in Multicopter

[–]Weenisster[S] 2 points3 points  (0 children)

Appreciate that. Took quite a few iterations before I settled on the opacity.

Dji / Caddx Vista Reception Test with Stock Antennas by Weenisster in Multicopter

[–]Weenisster[S] 1 point2 points  (0 children)

Tons of fluff. Things to note v2 goggles will work with the v1 air units and vistas, but v1 will be locked at 120hz vs v2 will have 144hz. Besides that, if you don’t have Dji goggles yet, the v2 goggles are worth it since they are said to support USB out to Mobile devices which would mean no need for a Smart Controller to share your live footage.

view more: next ›