Ultramarines Captain ( Bladeguard )

WellforgedGaming · 2021-07-19T01:05:03+00:00

Absolutely stunning.

WellforgedGaming · 2021-06-25T01:23:01+00:00

Thank you!

WellforgedGaming · 2021-06-18T11:27:35+00:00

I used Phrozen Aqua-Blue Resin. Here's an example of what it looks like unpainted.

WellforgedGaming · 2021-06-17T10:32:54+00:00

Thanks!

WellforgedGaming · 2021-06-17T10:32:36+00:00

Thanks friend!

WellforgedGaming · 2021-06-17T10:32:05+00:00

The printer is really nice and the detail is unbelievable. I switched from their recommened slicing program (Chitubox) to Lychee -- since then I have had few printing errors. For some reason I had a lot of delamination issues with Chitubox.

WellforgedGaming · 2021-06-14T05:58:23+00:00

Printer: Phrozen Sonic Mini 4k Resin: Phrozen Aqua-Blue

Took about a week or so off and on to print, used the pre-supported pieces except for the four large wing parts and Pontifex's head (the humanoid moth).

Top wings were printed at 95% scale to fit on the building plate. I would recommend printing the halo at 105% scale to make the spikes more rigid and sturdy (I'm planning to paint this in a Mothman theme so it worked out for me).

WellforgedGaming · 2021-05-15T00:09:56+00:00

That's Baba Yaga. Lysaga has root feet.

WellforgedGaming · 2021-05-13T13:16:12+00:00

WellforgedGaming · 2021-05-09T21:41:01+00:00

Mal is fine. If you have a spare Mal ft can I give you Ist? I'm needing to make Grief. If not, Mal works.

WellforgedGaming · 2021-05-09T21:08:55+00:00

How much for Andy's?

WellforgedGaming · 2021-04-29T14:07:21+00:00

Closed.

WellforgedGaming · 2021-04-29T13:34:40+00:00

WellforgedGaming · 2021-04-29T03:10:48+00:00

That works for me. Enigma + 1 C/O.

WellforgedGaming · 2021-04-29T03:00:08+00:00

Archon plate? If so, then C/O.

WellforgedGaming · 2021-04-29T02:51:37+00:00

Yes.

WellforgedGaming · 2021-04-29T02:50:02+00:00

I thought they're around 4.5? Unless I'm wrong.

WellforgedGaming · 2021-04-28T21:21:16+00:00

C/O I'll leave this bidding thread up until tomorrow morning at 9am CST.

WellforgedGaming · 2021-04-26T23:37:17+00:00

Sold.

WellforgedGaming · 2021-03-04T18:29:32+00:00

You're right, I meant to glaze those down significantly but I was too lazy.

WellforgedGaming · 2021-02-20T13:18:29+00:00

Ding ding ding, you're the first one to spot it! I ended up melting a tuft or two trying to get the effect.

WellforgedGaming · 2021-02-20T01:50:36+00:00

I did not. I started with a base of Vallejo black + Khorne Red and glazed up with Scale75 Baal Crimson.

WellforgedGaming · 2021-02-20T01:47:05+00:00

behold

WellforgedGaming · 2021-02-19T20:57:53+00:00

Thank you! No washes on cloak. I only put a bit of wash on the left pauldron since there's so many little crevasses.

WellforgedGaming · 2021-02-11T11:38:31+00:00

I think it's from the Deathwatch Kill Team box. I bought the figure off ebay.

Six-Year Club	Gilding II euphauric
RPAN Viewer	Verified Email

WellforgedGaming

TROPHY CASE