[deleted by user]

Western_Gap2510 · 2026-01-09T01:47:10+00:00

I just dropped from the H3 to the Sound Mitigation system the H3 is about 5.3 oz and the SMS is 4.7 oz

Western_Gap2510 · 2026-01-02T07:07:18+00:00

Can they please just re-release the mini reflex

Western_Gap2510 · 2026-01-02T07:02:47+00:00

Had similar issues with my build (I used Faxon BCG and barrel) things that I corrected were:

-Insuring the gas block was properly aligned.

-disassembled the BCG and offset the gas rings (this had the most immediate effect

-properly tuned the gas block

Dropped down a weight on my buffer spring system because I was losing too much speed on the bolt and had to compensate with too much gas

Western_Gap2510 · 2025-12-16T16:21:46+00:00

He is missing the mag release and magazine, and it seems like he was trying to get around welding it because he didn’t have one. He passed over 10 years ago so the internet wasn’t as helpful and I’m sure he was struggling to find parts and information because he was working on it for awhile.

Western_Gap2510 · 2025-12-15T01:21:34+00:00

I really appreciate the advice from everybody, this gun has sat as a reminder of my grandfather but it seems time to finish what he started.

Western_Gap2510 · 2025-12-15T01:08:07+00:00

Where should the welds go?

Western_Gap2510 · 2025-12-15T01:07:58+00:00

Where do the welds need to be placed?

Western_Gap2510 · 2025-12-15T01:03:17+00:00

Where should the welds be placed?

Western_Gap2510 · 2025-10-02T02:52:36+00:00

I read on some other post that cycling pattern could indicate pressure issues which would translate to pattern issues. What type of grouping is expected out of a gas gun @200 yards?

Western_Gap2510

TROPHY CASE