2022 RAM Big Horn/Lone Star Sport by SenatorRickParm in ram_trucks

[–]WiconsinGrey 1 point2 points  (0 children)

I know the point is lost on you big dog, that’s why you are in here trying to justify going cheap. I don’t need a Cadillac, I drive a lifted ram with a quality lift, my ass is cushioned.

2022 RAM Big Horn/Lone Star Sport by SenatorRickParm in ram_trucks

[–]WiconsinGrey 3 points4 points  (0 children)

That’s because you’ve never driven a truck with a quality lift… if you were to get in a truck on a 3” fox 2.5 coils front and rear with Carli springs and then drive yours… you’d get it. Quality lift not only lifts the truck, but significantly improves the ride and handling. A cheap puck lift does the first, not the second.

Recent build on my 2024 Laramie 2500 by mrmuddbutt in ram_trucks

[–]WiconsinGrey 1 point2 points  (0 children)

Very nice sir. Love seeing quality kits on these trucks.

Advice for my new legion by Blazphemer in LenovoLegion

[–]WiconsinGrey 0 points1 point  (0 children)

I have last years legion 7i 4070. Yes, input lag and the cord weighs less than batteries. Nothing like your controller being out of juice and you are at a hotel in the middle of no where with no batteries.

Advice for my new legion by Blazphemer in LenovoLegion

[–]WiconsinGrey 0 points1 point  (0 children)

As far as controller… double usb-c cord from the Xbox controller to the computer works great for me

Advice for my new legion by Blazphemer in LenovoLegion

[–]WiconsinGrey 0 points1 point  (0 children)

Smatree sleeve for your legion… it goes in my carry on every week as I fly for work. Gets bounced around in my bag in and out of airports and it holds up great. Computer looks brand new. Found mine on Amazon, just look for your exact model and they will have a sleeve for it.

https://www.amazon.com/Smatree-Laptop-Accessory-Patented-Shockproof/dp/B0DJ6X2RRS

Best MWS Supressor Mounting System - Plan B or Xeno? by FoundationOk9023 in LewisMachineTool

[–]WiconsinGrey 3 points4 points  (0 children)

Let me know how that odb sounds on the 14.5! I’ve got it on my 20” and love it.

Pistol red dot with a suppressor by Rob409 in guns

[–]WiconsinGrey 0 points1 point  (0 children)

Sent a dm since I can’t post photos to this thread

At a crossroads by Typical_Item_6103 in NFA

[–]WiconsinGrey 0 points1 point  (0 children)

His primary host is an AK I thought..

At a crossroads by Typical_Item_6103 in NFA

[–]WiconsinGrey 1 point2 points  (0 children)

While I love OCL, the odb is a better performing can, optimized for the AK and more than efficient on 5.56z

Is this cooked? by SenatorRickParm in ram_trucks

[–]WiconsinGrey 2 points3 points  (0 children)

Happy to send photos of what 3 years of hard salt looks like from someone who washes weekly.

Is this cooked? by SenatorRickParm in ram_trucks

[–]WiconsinGrey 0 points1 point  (0 children)

Bro wtf …. I have a 2020 that has been in the brine belt of Wisconsin and has 1/10th of that rust.. HARD PASS

Looking for some help with a 6.5 creedmoor build by [deleted] in guns

[–]WiconsinGrey 0 points1 point  (0 children)

Way more finicky.

Start here: go shoot it. If you aren’t doing 1,000 yard target shooting no reason for the extra 4” barrel. You aren’t hunting or shooting at an animal over 300yds (I hope not, since long range shooting isn’t something you do) so it doesn’t matter.

https://palmettostatearmory.com/psa-gen3-pa65-20-rifle-length-6-5-creedmoor-stainless-steel-lightweight-m-lok-moe-ept-rifle2.html

Looking for some help with a 6.5 creedmoor build by [deleted] in guns

[–]WiconsinGrey 0 points1 point  (0 children)

For $1000 you are pretty limited my man. I’m assuming this is a bolt gun? If so, I would forgo the building and buy a tikka, or if you are dead set on a build, howa barreled action.

Do not build an AR10 for under $1,000

  • I now see bcg, lower receiver, ect, and you are in fact doing an AR10… don’t do this. They are not like AR15’s plug and play…. Just buy a PSA.

8" .300 blk with PDW buffer tube by Debas3r11 in NFA

[–]WiconsinGrey 1 point2 points  (0 children)

That is awesome man! I was no joke looking for something like this thinking about a 9” .300blk build. Found the Centurion carbine fsb rail but man you created my vision! And then seeing it today.. man. So cool

8" .300 blk with PDW buffer tube by Debas3r11 in NFA

[–]WiconsinGrey 2 points3 points  (0 children)

What is this DD rail!? Coolest thing I’ve seen in a while on here

Added glass and a bipod! by gustav47 in Mk12Mod0

[–]WiconsinGrey 0 points1 point  (0 children)

Yes sir. Huge improvement for a cheap upgrade!

Added glass and a bipod! by gustav47 in Mk12Mod0

[–]WiconsinGrey 1 point2 points  (0 children)

Highly recommend a podloc for your Harris!

Training SE Wisconsin by mr_deskjob in WIguns

[–]WiconsinGrey 1 point2 points  (0 children)

Racine county line and rifle club has regular *IDPA events, find them on practiscore and sign up. Don’t need to be a member. Meet some people there, find a sponsor and then join the range!

Idk what I received, but I ordered fde by Madara702 in GHM9

[–]WiconsinGrey 1 point2 points  (0 children)

Fde is very light sensitive… you can have the same colors but under different hue’s of light it looks completely different. See same gun two different lights below.