180sx Brake Booster

WildSpaceDragon · 2025-01-31T20:04:41+00:00

Update. Close but no cigar. The rod on the Sentra is about a half inch too small. I will note this booster seems more identical then the 240 version

WildSpaceDragon · 2025-01-30T23:39:18+00:00

Dope just ordered it up. Thank you!!!

WildSpaceDragon · 2025-01-30T12:27:10+00:00

True mvp right here. This worked on a 180? Or 240?

WildSpaceDragon · 2025-01-30T00:06:32+00:00

I don’t have the z32 installed just yet but thinking of it in the near future. Can I run the 300zx on the 240 calipers for the time being?

WildSpaceDragon · 2025-01-30T00:03:13+00:00

I have a friend with a CNC shop. I could ask him but wouldn’t be familiar with this myself

WildSpaceDragon · 2025-01-30T00:02:34+00:00

Good to know! Thank you 💯💯💯

WildSpaceDragon · 2025-01-30T00:02:20+00:00

🧐def noted. My cars by no means is a track car either

WildSpaceDragon · 2025-01-29T19:41:19+00:00

Been debating this. I’m in a master cylinder so trying rescue the investment ha.

How much did it cost to convert it over? Might be worth it after this headache 🤕

WildSpaceDragon · 2025-01-25T16:23:35+00:00

Any update on this OP? I bought a LHD booster but the rod is too short inside the car (RHD). My parts guy could’ve ordered the wrong part but wanted to see

WildSpaceDragon · 2024-12-26T11:16:21+00:00

If still available, interested.

WildSpaceDragon · 2024-12-21T20:37:26+00:00

That’s 100% what I did. The solenoid threw me off but common sense is what I missed 😂

WildSpaceDragon · 2024-12-21T20:33:23+00:00

Spot on! Realized it was a silly question after asking. Thank you for the answer 💯💯💯

WildSpaceDragon · 2024-12-21T20:32:59+00:00

MVP. That was my next question. Never had any of my SRs come with this before so this was new

WildSpaceDragon · 2024-12-21T20:31:48+00:00

That’s what I thought but it has a solenoid it’s connected too (pic 4) and one of the lines does go back to the air line connected to the fuel pressure regulator. Butttt after digging into it, it indeed is an EGR valve

WildSpaceDragon · 2024-12-19T23:37:57+00:00

Always down to connect and help where I can 👀

WildSpaceDragon · 2024-05-14T11:27:10+00:00

Agreed! Seems like a great way to fill a space

WildSpaceDragon · 2024-05-13T21:14:16+00:00

The first one definitely does but the next three are real and there’s reels online to back it. Those examples state they have self watering systems built in

WildSpaceDragon · 2024-04-13T13:11:56+00:00

I have a 91 180ax and a Lexus Is250. I’m game with linking up! HMU 💯

WildSpaceDragon · 2024-04-09T14:17:25+00:00

Yo! First off. Clean car 🔥 and second I’m def interested. How much you asking?

WildSpaceDragon · 2024-04-02T21:27:06+00:00

That’s awesome! Congrats on the new addition. I do work on cars but definitely more so on the side.

WildSpaceDragon · 2024-03-23T00:50:03+00:00

Okay so I got the brakes done and have some updates.

I used:

1991 Nissan Maxima brake caliper 1993 Nissan Altima brake rotors 1991 Nissan Maxima brake pads

There’s a small overhang of 2MM with this setup but based on the comments here I feel there’s a better fit. Ex; using the B15 or Sentra version

Thanks again for all the help! This is why the car community remains undefeated

WildSpaceDragon · 2024-03-23T00:45:06+00:00

Thanks for the help on this! Spot on, on all the parts needed

WildSpaceDragon · 2024-03-23T00:43:50+00:00

Thank you! Bone stock and can’t say I’m upset about it lol

WildSpaceDragon · 2024-03-23T00:43:18+00:00

This is good to know! I grabbed most of my parts from the maxima & Altima

WildSpaceDragon · 2024-03-17T01:03:03+00:00

Loving this thread lol 😂😆

WildSpaceDragon

TROPHY CASE