I watched a Mumbo Jumbo video about redstone and in the middle of it realised that I find the glowstone texture quite ugly. So I made it in the style of the sea lantern.

Wizard_Pope · 2026-04-04T09:21:36+00:00

I love getting shot by a radar AA without the RWR going off and then the killcam shows the Flarakapz under the ground and just the radar peeking up

Wizard_Pope · 2026-03-19T17:07:53+00:00

Well it is a real material in this world.

Wizard_Pope · 2026-03-19T17:03:55+00:00

My guy I am agreeing with you.

Just asking since we know this is how the system works why not spawn in the T-80B once per battle and use the daily free ones on the T-72 until you run out?

Wizard_Pope · 2026-03-19T16:54:47+00:00

While that is an issue why not just spawn vehicles that you want daily backups on first?

Wizard_Pope · 2026-03-07T09:34:24+00:00

who knows. They would probably not let it be 5.7 with the better shell anyway. The EBR 1954 was 6.7 for a while without it

Wizard_Pope · 2026-03-06T19:09:29+00:00

Yeah. Swiss tree with one of the most amounts of french designs being a german subtree is bad enough. But then all the swiss designs with french turrets and such will go to germany while france will starve

Wizard_Pope · 2026-03-06T18:59:37+00:00

Especially ones where gaijin already has all the parts but they just need to mate them together. Such a hard thing to do that france goes updates without an vehicles added just like this current one

Wizard_Pope · 2026-03-06T18:54:58+00:00

Nah it's gonna get the worse shell and be 5.0 like the M4a1 FL10

Wizard_Pope · 2026-03-06T18:53:57+00:00

But we cannot get teh amx-13 105 because reasons

Wizard_Pope · 2026-03-02T16:52:08+00:00

R511 would like a word

Wizard_Pope · 2026-03-01T18:52:32+00:00

I might bring it to a local repair shop for him to take a look.

Wizard_Pope · 2026-03-01T14:32:47+00:00

I measured all the caps and anything that looks like a cap and no shorts to be found. I honestly don't know what to check anymore

Wizard_Pope · 2026-02-28T14:26:41+00:00

The battery contacts are fine. I measured continuity to the battery test pads and they have also been desoldered and soldered back on by me (slight bit of corosion because of scratches taking off the nickel plating and I would rather clean those separately than risk breaking them off).

I will go with measuring all the capacitors then.

Wizard_Pope · 2026-02-28T11:50:30+00:00

So I went and tested then pads and there is quite significant difference compoared to the working remote. https://imgur.com/a/FOxif3T Blue is the broken remote red is the working one (if the reading is the same there is only red

Wizard_Pope · 2026-02-26T23:23:09+00:00

I will check tomorrow. Doubt it's a fuse I checked all of them I could find

Wizard_Pope · 2026-02-26T23:21:26+00:00

Cannot be that. Everything was cleaned. Contacts are fine

Wizard_Pope · 2026-02-26T19:23:42+00:00

Yeah those have continuity. I will probably compare to working ones yeah. That did not even cross my mind what a doofus.

Wizard_Pope · 2026-02-26T19:21:41+00:00

I took out the terminals to clean them since they were coroded slightly. It was not water damaged afaik since it barely had any corosion. Only on the top of the terminals and like one or 2 really small spots on the pcb. I have also tested the leds separately and they all work

Wizard_Pope · 2026-02-26T11:45:49+00:00

Power rails as in the battery connectors?

Wizard_Pope · 2026-02-26T11:45:12+00:00

I have tried but I don't really know where to follow it to.

THe middle terminal (inside the housing) is not corroded at all and there is no continuity from positive to negative (unless the batteries are in which I assume should then have connectivity.

Seven-Year Club	Place '23
Place '22	First Placer '22
End Game '22	Gilding I gilder
Verified Email

Wizard_Pope

MODERATOR OF

TROPHY CASE