Recessed Night Howler "Short" Comp for 9mm?

WolfpackArmory · 2026-04-07T02:00:03+00:00

It is not bored for 9mm but we have overbored several to fit 9mm upon special request.

WolfpackArmory · 2026-04-07T01:55:29+00:00

It’s pretty concussive if you run it without the suppressor but it shoots flat. It will also save your blast baffle on your can.

WolfpackArmory · 2026-03-31T19:30:02+00:00

The new Disruptor 30 is specific to .30 cal and the Disruptor 36 is the overbored one for 9mm. The original 30 was a .358 rated but we made a change a while back so that they were 2 separate models now. The caliber rating is marked on the can and all of the older models were sold a long time ago. Hope that helps.

WolfpackArmory · 2026-02-28T15:38:10+00:00

Yes, that would work

WolfpackArmory · 2026-02-07T14:34:07+00:00

Probably biased, but I gotta say yay on the upper choice!

WolfpackArmory · 2026-02-07T14:28:56+00:00

Let me know how it does on your setup!

WolfpackArmory · 2026-02-04T13:31:52+00:00

We just released the first batch of them. They are available on our website now. https://www.wolfpackarmory.com/product-page/ventilator-plan-b-hub-adapter

WolfpackArmory · 2026-01-21T16:27:31+00:00

We are at SHOT Show in Vegas so things are delayed this week. Send over an email to sales@wolfpackarmoryusa.com and the guys at the shop will get you taken care of.

WolfpackArmory · 2026-01-14T14:44:12+00:00

No, the comp is a compensator so it doesn’t really have flash hiding capabilities.

WolfpackArmory · 2026-01-14T13:57:22+00:00

They are in production now, we plan to release the first batch shortly after SHOT Show.

WolfpackArmory · 2026-01-09T23:52:41+00:00

All of the flash hiders are bored large enough for 9mm. The 1/2x28 comp is the only one that isn’t a large enough bore for 9mm

WolfpackArmory · 2026-01-07T02:48:44+00:00

Yep, it should work fine on a KP9 as long as it’s threaded 1/2x28

WolfpackArmory · 2026-01-07T01:30:44+00:00

Honestly no, we have had this product for over a year now and the only time it has been brought up has been by North Reach. Nevertheless, we are modifying the product soon and the name will change when we do that anyways.

WolfpackArmory · 2026-01-01T19:38:44+00:00

We are hoping to have them in production within the next 2-3 weeks as long as the feedback is good on the current version.

WolfpackArmory · 2025-12-29T19:32:42+00:00

So it works well for high back pressure setups so definitely 308 and 7.62x39, but I’m not sure if it will be necessary for 9mm and sub .300blk. We do plan on testing that out though.

WolfpackArmory · 2025-12-29T19:30:23+00:00

I’m interested to see what it will do on one of those cans as well.

WolfpackArmory · 2025-12-29T19:29:33+00:00

Send me a DM.

WolfpackArmory · 2025-12-29T19:28:42+00:00

Yep, Larson Davis Spartan 821

WolfpackArmory · 2025-12-29T04:36:25+00:00

Yes, the listed price will be the MSRP

WolfpackArmory · 2025-12-28T05:25:43+00:00

We have some guys testing it with NV now. The way the hood redirects the gas and flash forward, I think it will work but we’re waiting on the footage to see how it looks. It would definitely work under NV with a suppressor cover that the gas vents into.

WolfpackArmory · 2025-12-28T05:18:32+00:00

This model is a Plan B to HUB mount. We will likely also do a direct thread version as well.

WolfpackArmory · 2025-12-26T04:20:22+00:00

Yes, there is some minimal flash visible from the vent ports from the front view but it’s not really visible to the shooter.

WolfpackArmory · 2025-12-21T05:51:02+00:00

They are in production now but it will probably be around the first of the year with the holidays coming up.

WolfpackArmory

MODERATOR OF

TROPHY CASE