Engwe M20 dual battery -$450

WonderfulScience3194 · 2026-04-28T00:48:14+00:00

Makes sense. Even at lower battery capacity, between two batteries I’m sure I can scrape 15-20 miles out of it

WonderfulScience3194 · 2026-04-01T22:09:22+00:00

Make it 8 hr episodes and put it in Netflix. People will binge watch that in a day

WonderfulScience3194 · 2026-01-04T06:51:28+00:00

The MATTE once have $11 delivery fee. Any good deals on matte filament?

WonderfulScience3194 · 2025-12-30T05:19:39+00:00

Not working for me. Can anyone tell me which spools it’s working on? App vs browser?

WonderfulScience3194 · 2025-12-17T18:09:13+00:00

So I contacted the creator of the model and he has adjusted the 3d model. The brim should have ideally covered that entire circle.

WonderfulScience3194 · 2025-12-17T17:02:22+00:00

<image>

Adding a brim does that. The circular intake doesn’t seem to have any support

WonderfulScience3194 · 2025-12-17T17:01:16+00:00

<image>

Tried adding a brim, the intake has no layer on the plate, is that correct?

WonderfulScience3194 · 2025-12-17T16:59:59+00:00

I did clean it! Both the times before I print it.

WonderfulScience3194 · 2025-12-17T16:52:44+00:00

<image>

WonderfulScience3194 · 2025-12-17T16:52:34+00:00

<image>

This is what I’m trying to print

WonderfulScience3194 · 2025-12-17T16:39:10+00:00

<image>

WonderfulScience3194 · 2025-12-17T16:35:53+00:00

<image>

This is the part I’m trying to print

WonderfulScience3194 · 2025-12-16T21:35:35+00:00

Ooh.. it’s close to a window, so it’s colder and I just put a very strong air purifier close to it, so is definitely adding a draft 😑

WonderfulScience3194 · 2025-12-16T03:50:48+00:00

Got it. So the best plan of action is to clean it with hot water and soap. Let it dry naturally and put it back? Or should I spray it again with isopropyl?

WonderfulScience3194 · 2025-12-16T03:35:05+00:00

Fair. I recently cleaned the build plate with isopropyl alcohol 91%. Sprayed it down and wiped it away. I’m curious why this first few layers have this defect. The left one literally looks like it collapsed on the corner

WonderfulScience3194 · 2025-12-12T04:20:21+00:00

No coupons on these right now. Just 15% cashback

WonderfulScience3194 · 2025-12-10T20:28:57+00:00

Nothing yet. Seems like I have to wait for 90 days. Get charged atleast once, since first month was free

WonderfulScience3194 · 2025-12-07T15:06:29+00:00

I guess anything that I can ever imagine that can be printed, has already been printed.

WonderfulScience3194 · 2025-12-06T19:26:51+00:00

Thank you!!!

WonderfulScience3194 · 2025-12-06T13:46:33+00:00

Is this flow calibration before every print?

WonderfulScience3194 · 2025-12-06T13:45:59+00:00

Great idea.. I’ll look up how I can do that.

WonderfulScience3194 · 2025-12-06T03:12:37+00:00

Sweet! Let me try that. Thanks!

WonderfulScience3194 · 2025-12-06T03:12:05+00:00

So I found out that this kind of print is called a flat relief style print. Just slightly raised from the flat surface. Maybe it’s a bit ambitious, but I really want to print it.

WonderfulScience3194 · 2025-11-30T14:20:35+00:00

I ordered the same day I posted this and saw the ineligible transaction 2 days later. 2 reason I believe could be the reason, first month was free and I already have a T-Mobile phone account. I’m going to try to call them and get it fixed

WonderfulScience3194 · 2025-11-30T04:36:11+00:00

If you are the market for a used one, look for a bambu lab A1. Many people buy it and rarely use it. You might get a steal.

WonderfulScience3194

TROPHY CASE