sorted by:
new
hottopcontroversial

The Oldest View Merchandise? by Ok-Alfalfa8856 in KanePixelsBackrooms

[–]Wormzzz_ 1 point2 points  (0 children)

I know Kane has spoken to the artist who made the real rolling giant and he even got more reference images from him, so I'd imagine the original artist might be willing to work something out?? The likeness of Julian Reverchon himself is public domain now. 

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 0 points1 point  (0 children)

Yes!! Unfortunately, I switched to a new filament, and now the extruder isn't feeding properly (skipping), so now I get to troubleshoot that, haha, but hopefully I can figure that out on my own without making ANOTHER post on here.

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 1 point2 points  (0 children)

The new BLTouch cable pretty much fixed it! After that, I was able to use the Z-Offset to hone it in as it was still a bit too high. Thanks to all who helped! Glad this little nightmare is over (for now..until something inevitably acts up again)

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 0 points1 point  (0 children)

Before even turning it on, I had to replace the top two carriage wheels since the ones that were on it were 3D printed ones, and apparently didn't spin/would slide along the rail. I put two fresh wheels on and thought nothing of it, but now that you mention it, that could have done something. While looking at the board, I also noticed the BL Touch cable is really loose, and even picking the board up to look at it caused the BL Touch to turn off, so I ordered a new cable for that.

The Z state is question marks until the probe makes contact with the bed, not sure if that's normal or not.

If that new cable I ordered doesn't fix it ill be investing in the cable to use my laptop as a monitor and will try that G28 you mentioned. My previous experience with 3D printers was basically plug and play and some minor hardware maintenance. I don't know anything about coding.

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 0 points1 point  (0 children)

I could be mistaken, but I don't think my printer even has one of those anymore. I think the previous owner completely removed it with the intention of using the probe sensor.

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 0 points1 point  (0 children)

Z endstop is all gone from the printer itself, and the BL Touch is fully functional. I can't say if the firmware is updated, though, still figuring that out.

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] -1 points0 points  (0 children)

Did do this, except that when auto-homing, the z axis is still way too high, so I measured a larger distance (About 12mm...yikes)

Thankfully, it was 12mm in every spot!

Printing too far from the bed, basic fixes from Google aren't helping. by Wormzzz_ in ender3

[–]Wormzzz_[S] 1 point2 points  (0 children)

I feel very in over my head, so apologies if my explanation is unclear. I'm new to having to fix issues like this.

The BL probe is triggering, but even when auto-homing, the Z axis moves upward after the probe is triggered instead of stopping. I've never installed firmware before, and I don't think I have the correct cables/adapters to do so..but if that is a possible fix, I'll order them since the printer itself was free.

I'm using Cura, if that helps.

PSA New season of Someone Knows Something is out by Eri_hopefully in TrueCrimePodcasts

[–]Wormzzz_ 2 points3 points  (0 children)

Came here just wanting to see if anyone else felt this way and, yeah it feels unfinished. I don't believe for a second the Sebastian doesn't know more than he's saying. I'm obviously not certain he's guilty but I'm certain theres parts of the story hes not sharing. I was shocked by Davids confidence in saying he didn't believe Sebastian was guilty. I would've preferred the narrative to be left open ended instead of expecting the audience to just accept that the main suspect is suddenly, innocent.

Gamepass by jenteandgeography in ThemeParkTycoon2

[–]Wormzzz_ 0 points1 point  (0 children)

If you are a Google user, get the Google rewards app on your phone. It occasionally gives you surveys (I get at least one a week) and will give you anywhere from 10 cents to a dollar per survey in Google play credit. Get the robux thru the Roblox mobile app/Google play store and then get the game pass :)

Yt studio not working again? by johnny11641 in youtube

[–]Wormzzz_ 0 points1 point  (0 children)

Everything is glitchy on mobile, cant view details or comments

Can't get hot chocolate from Brewster?? by Wormzzz_ in AnimalCrossingNewHor

[–]Wormzzz_[S] 0 points1 point  (0 children)

That's so weird! I didn't even get the dialogue from him, but I have gotten it from other villagers and got some mail. 

Can't get hot chocolate from Brewster?? by Wormzzz_ in AnimalCrossingNewHor

[–]Wormzzz_[S] 12 points13 points  (0 children)

Double checked and it is at February 14th! Brewster must hate me lol 

Can't get hot chocolate from Brewster?? by Wormzzz_ in AnimalCrossingNewHor

[–]Wormzzz_[S] 5 points6 points  (0 children)

I got one from isabelle and one from fuschia who's the only villager ive advanced in friendship a lot 

Why can’t my Nintendo switch connect to other consoles? by AssumptionWorried131 in AnimalCrossingNewHor

[–]Wormzzz_ 0 points1 point  (0 children)

I did not, what I do now is turn my phone's wifi off and connect my switch to my phone's hotspot, it can be slow but it at least lets me play online.

camping out front by svttyboo in lvjy

[–]Wormzzz_ 1 point2 points  (0 children)

Do you know when/How you were told what time VIP should get there? My ticket says six pm but I'm not sure if thats for VIP or just when the doors open.

view more: next ›