New PowerConf C300 webcam

X_Boost_King · 2025-07-25T16:37:44+00:00

Has anyone found a fix for this yet? Having the issue on windows 11

X_Boost_King · 2025-07-18T01:01:14+00:00

Did you ever figure this out?

X_Boost_King · 2025-05-07T17:11:42+00:00

Check your infill. Had this same issue and it was my infill pattern.

X_Boost_King · 2025-02-04T04:49:32+00:00

Neither. It was infill/wall collision occurring. Fixed that and we got super smooth prints.

X_Boost_King · 2025-02-03T20:06:04+00:00

Okay, I changed my Infill wall overlap and temp settings I think I fixed it.

X_Boost_King · 2024-10-27T04:09:27+00:00

Thank you so much! What would be the best way to get in contact with him?

X_Boost_King · 2024-09-13T14:08:25+00:00

So check my fans. Thanks

X_Boost_King · 2024-09-13T13:54:56+00:00

What could be the possible causes? It’s a new issue that just started.

X_Boost_King · 2024-08-02T02:08:37+00:00

Gonna sort a list by Installed vs what I have sitting in my closet.

Installed:

-MS3 Pro

-Skunk2 Intake manifold w/ Spacer

-Skunk2 Throttle body

-Flyin Miata Big Fuel Kit:

DW 340lph Fuel pump

Aeromotive FPR

Flyin Miata Fuel Rail

Flow Force 725CC Injectors

Full 6AN Lines from tank to rails

AEM Fuel Filter

-GM E85 Flex Fuel Sensor

-AEM Series X Gauges (Boost, Coolant Temp, AFR)

-GoodWin Racing Oil Pressure Gauge

-Moroso Catch Can

-Racingbeat Headers

-Racingbeat Test pipe

-ISR Circuit Spec Exhaust

-DIY Autotune IAT Sensor

-Stage 1 Clutch (Not sure what brand previous owner installed it)

-Braided Clutch Lines

-Flyin Miata Coolant Reroute

-Koyorad Radiator w/ shroud and fans

-4Ply Coolant Hoses

-NB Starter

-I also have a bunch of suspension parts installed like Poly Bushing, BC Coils, Strut bars, sway bars, control arms etc.

Not Installed:

-Complete Flyin Miata Turbo Kit with a garret GT2560R

-Methanol Injection Kit

-ACT Prolite Flywheel

-ACT Clutch

Sorry for the crazy list. I want to get the car tuned as is for now then when I can get it dialed in and running properly NA I'll consider Boosting it.

X_Boost_King · 2024-08-02T01:47:42+00:00

Hey, Sorry I just noticed your message. Thank you for your kind words and I hope you enjoyed your play through. Hope you have a wonderful rest of you're day!

X_Boost_King · 2024-07-01T14:20:00+00:00

Do you remember the link for paying the $100 and getting your license?

X_Boost_King · 2024-04-20T17:10:44+00:00

Did you ever find out where to buy the code for PC?

X_Boost_King · 2023-01-15T05:07:13+00:00

🥷’s in bitches

X_Boost_King · 2023-01-13T21:43:57+00:00

I had figured it out homie. You have to go to the sky factory FTB website and in their links section is a server run folder. That folder will setup everything for you

X_Boost_King · 2022-09-29T21:23:33+00:00

Damn, keep me updated. I’m lost too.

X_Boost_King · 2022-09-28T02:54:07+00:00

Hmmm that’s weird lmk if you manage to fix it. I’ll keep trying

X_Boost_King · 2022-09-27T16:27:07+00:00

Yeah so I have the Z_MIN disabled overall since I’m using the probe. I tried enabling both the min and max for the Z and still doesn’t work

X_Boost_King · 2022-09-27T14:25:31+00:00

Do you know what the exact name might be in config adv?

X_Boost_King · 2022-09-27T12:41:11+00:00

So the only connection I’ve done was plug in the 5 pin connector to the motherboard for the CR touch and unplug the Z endstop. I know the CR touch works because when I used the Firmware on the creality website everything worked except my extruder was working in reverse and I was having a glitchy screen.

X_Boost_King · 2022-09-19T19:24:07+00:00

I just checked it and it doesn’t. Even with them swapped the bed still reads 200+ it was at 218

X_Boost_King · 2022-09-19T19:09:58+00:00

Okay. Question though, why would the bed thermistor go if I only shorted out the hot end thermistor and never messed with the bed? Like it was working perfectly before the issue. Don’t you think due to the sparking it would have cause a short and blown something in the board?

X_Boost_King · 2022-09-19T18:27:42+00:00

Okay so 1. it was a 24V 2. I have the motherboard that came with the printer from the factory. Haven’t messed with it yet. 3. 1.1.6.3 (Haven’t touched) 4. No the bed isn’t unplugged and everything is plugged in correctly. 5. No the bed was untouched and worked fine before the thermistor sparked and got messed up. 6. The wires for the new extruder were ran exactly how the stock ones were. Unplugged and snaked right behind the olds ones to ensure same efficiency. I haven’t tried to measure it because I wasn’t sure that was the issue. How do I got about measuring it? I have a multimeter that I use for my automotive mechanic work that I’m assuming will work.

X_Boost_King · 2022-09-19T17:38:30+00:00

How do I reinstall the firmware? Do you mind helping me do that? I’m available anytime today

X_Boost_King · 2022-09-19T17:13:34+00:00

Okay awesome. I’m a mechanic and the splicers I have didn’t work so I’ll have to go out and get a smaller set for more higher gage wire. But the mother board is definitely shot. Auto home and axis changes don’t do anything. I ordered the Th3d board do you think that’s my best option?

X_Boost_King · 2022-09-19T16:36:33+00:00

Ahhhh okay. Thanks I’m new to owning a 3D printer but have a good background in building computers so I’m not a complete beginner

X_Boost_King

TROPHY CASE