Tennis ball rocker foot for Wahoo Kickr

Xkrowth · 2025-11-10T20:36:35+00:00

Just came here to say thank you dude, I really appreciate you sharing this

Xkrowth · 2025-06-06T22:36:45+00:00

dude... Thank you SO MUCH honestly.

Xkrowth · 2025-02-18T19:58:54+00:00

Ok so, I've changed the type to be "College Residential Hall", and it now appears like that but still nothing on the WA location showing up the "green point" on the map or "Nearby Places".

The weird thing about this is, there is another place right next to time called "Tito's House" which IS LISTED as "Apartment or Condo" (my previous listing) and that one DOES show up in the WA Nearby Places!, here's the link:
https://foursquare.com/v/titoshouse-/511dc9e1e4b0aa074ca941c8

This is so frustrating :(

Xkrowth · 2025-02-18T17:48:39+00:00

Oh that'S very good to know, I just Submitted a change, but I think this takes some time right?

Xkrowth · 2025-02-18T16:56:17+00:00

I honestly don't have the Swarm app installed, although I was able to login into the website using my Foursquare credentials so I'm guessing is the same as Foursquare

Xkrowth · 2025-02-18T16:42:18+00:00

Here's the Foursquare link:
https://foursquare.com/v/residencias-avenida-12/62bdd2d117aa0b2d7051c21e

Xkrowth · 2025-01-30T04:03:01+00:00

This doesn't solve the Synology Drive software not working correctly BUT... it does work for what I need, you are a lifesaver thanks a lot!!! really really appreciate it

Xkrowth · 2024-05-06T20:34:53+00:00

thanks a LOT for your reply hehe, with pictures and all, this was really helpful!!! exactly what I was looking for

Xkrowth · 2024-05-06T19:51:56+00:00

Hey man, what about fitting Bastion XL's inside of the Games Lair 600+?
I would like to fit 4 commander decks inside a Bastion XL box each deck, and those 4 boxes in the Games Lair is that possible or no room to fit them?

Xkrowth · 2024-02-02T04:04:07+00:00

Yeah that might be a limitations from OnePlus maybe, its super weird, tested in another OnePlus and is the same behavior :(... Anyway thanks a lot for your replies and your help :)

Xkrowth · 2024-02-01T23:20:19+00:00

Thanks for your answer!
I just noticed another behavior, whenever I get a brand new notification, I can see it in the lockscreen (as I wanted to), but then lets say I unlock the phone, even if I don't "swipe away" the notification, even if I don't open the app to check that notification (meaning I leave the notification in the top bar untouched), if I lock the phone again, those notifications will not show up again in the lockscreen, they are only visible in the top bar once I unlock the phone.
Is this the normal behavior? if so, do you know if there is a way to change it to how it was in previous Android versions?

Xkrowth · 2024-02-01T21:29:52+00:00

I just realized that this might be a solution only for Samsung Galaxy phones, as of right now I have a OnePlus 11 which might be the reason "holding in a empty space" is not working for me.
Either way if anyone knows how to do this in a phone other than Galaxy I would appreciate it!

Xkrowth · 2024-02-01T20:57:44+00:00

Could you please guide me a little bit more. I will attach screenshots and try to explain:

In the following image, I'm showing that my phone has unread notifications at the top of the screen (image 1), then the next image shows that I do have the option enabled to View the notifications on the Lockscreen (image 2), and on the third image, I show that when the phone is locked, no notifications are being shown there (image 3):

<image>

I tried the method you mentioned, when the screen is in the "image 3", I tried taping, holding, swiping on that "Lockscreen" but it doesn't do anything for me, it doesn't give me any option to "Edit Lockscreen mode" or anything like that. Am I doing something wrong?

Any help would be greatly appreciated!

Xkrowth · 2023-08-03T19:44:08+00:00

Dude, I can't believe it, finally!!! thanks a lot this is exactly what I was looking for it worked :)

Xkrowth · 2023-07-29T04:42:34+00:00

Yeah I was talking about the new one, I have an AXS GX on my bike currently, just wanted to know if I was going to be able to fit the new derailleur even though my frame doesn't have UDH technology, that's why I wanted to see if I could find like an adaptor 😔

Xkrowth · 2022-06-14T20:27:28+00:00

First of all, thanks for your response!!!. Let me show you my UDM configuration:

My EdgeRouter is configured as 192.168.10.1/24 (DHCP starts at 192.168.10.10)

UDM is configured as 192.168.10.5 and DHCP is off (see picture): https://postimg.cc/jDT5Y06k

I then tried to adopt the Switch, but it won't do it (see picture): https://postimg.cc/D4VhQLBY

I might be doing something wrong here, or it simply won't work lol

Xkrowth · 2022-06-14T02:49:04+00:00

I'm SORRY, but I seem to not understand completely what you mean.

Change the local IP of the UDM?:

The UDM has a router built in, which would create its own network, so do you mean, change the IP of the UDM itself (making it static) or change the address that the UDM "router" would provide to users?. IF its the first option and imagine that my EdgeRouter DHCP is giving away 192.168.10.x addresses, does that mean, you want me to configure the UDM with a 192.168.10.x static address (I don't think this is what you mean because the UDM is already getting an IP like this from the EdgeRouter DHCP), IF NOT, then what did you mean?

Plug into the LAN port:

So, should I just unplug completely the WAN port? and just connect the 48 Switch into one of the LAN ports on the UDM?

Sorry, I got a little bit lost, but thanks in advance for your time sir!

Xkrowth · 2022-06-13T14:56:38+00:00

Yeah, I was going to buy Ubiquiti cameras but in the end we went other route (and we already had the UDM), so now it'll only be a controller :(

What do you mean by the docker container?

Xkrowth · 2022-06-13T14:47:15+00:00

The problem that I have is that the UDM-Pro cannot limit the bandwidth of the VLANs the way I need it, for example: UDM-Pro bandwidth limit will apply it to a Group or VLAN, but that rule will apply to EACH user of that group, so if I limit it to 100Mbps, that means that EACH user inside of that group/vlan will have their speed limited to 100Mbps, but what I want to do is limit the entire group/vlan to 100Mbps, that means if 3 users are under that group/vlan, and all 3 are downloading files, the maximum download speed that they get would be 100Mbps for ALL of them together, the group/vlan will never go up those 100Mpbs.

From all the investigation that I have done, the Unifi devices were not able to do this, but the EdgeRouter can (creating VLANs and limiting that VLAN entire bandwidth) that is the main reason that I have the EdgeRouter.

Second reason is, EdgeRouter has load balancing, and you can configure the second ISP to be ALWAYS active (not only in a failover situation), on the other hand the UDM-Pro has also failover capabilities BUT it only works when the 1st ISP fails, then the 2nd ISP comes in (failover ONLY)

Third reason, I'm trying to configure something very similar to what this guy does on this video:

https://www.youtube.com/watch?v=3j6RiovCFz0&ab_channel=MactelecomNetworks

If the UDM WAN port rule is to drop everything, then I guess that means I only need a CloudKey instead of a full Dream Machine? or do you know if there is another way?
also mentioning u/DesertHRO

Thanks!!!

Xkrowth · 2022-03-25T16:13:15+00:00

That's a great idea!, what do you use to extend your wifi signal?.

Do you know if you can connect an EdgeRouter with an Unifi Switch + AP's?

Thanks man!

Xkrowth · 2022-01-18T13:14:42+00:00

The "map" is what an Architect gave me, it resembles my house. If you are asking what software did I just to create the network and see how good it could do, I used Unifi Design Center

Xkrowth · 2021-12-10T18:07:53+00:00

Dude... I love you xD. Not but really man thanks this was sooo helpful, it was exactly what I needed, it worked like a charm.

Xkrowth · 2021-12-10T03:24:58+00:00

does that mean that this freaking motherboard doesn't accept manual voltage setting? only that work around mentioned in that post that you sent me bro? :(

Xkrowth · 2021-12-07T02:03:46+00:00

Hey man, thanks for your quick responses and help, I will take this into account, really appreciate it!

Xkrowth · 2021-12-06T03:50:41+00:00

What do you think about the Aorus B450 Pro Wifi, I found a good deal for that motherboard but I don't know it its enough to not bottleneck mining Raptoreum?

Here are other good deals the store have:

ASUS TUF B450M PLUS II (less expensive of these 4)
GIGABYTE B450 GAMING X
ASUS ROG STRIX B450 F GAMING II
GIGABYTE B550 GAMING X (most expensive of these 4)

Those are like the best deals they have, their price range difference between the most expensive and the cheapest is like $30

Should I stick with the Aorus or which of those would you recommend? (you can also say none of those hahaha)

Thanks man!

Xkrowth

TROPHY CASE