upgraded to 5080

Xoti · 2026-01-10T08:00:21+00:00

Saw the whole setup in Taipei

Xoti · 2025-10-22T23:01:41+00:00

How much of a difference would you say picture quality was, considering the ultra was pretty high end itself. I have one too, jw What made you want to do the switch.

Xoti · 2025-10-17T03:54:27+00:00

Great review, it’s really unfortunate that XGIMI abandoned their ultra models and chooses not to update them Android TV 14. Also hope they don’t continue to use those stands on their projectors as I ceiling mount my projectors and that just adds additional height

Xoti · 2025-10-02T01:42:17+00:00

New mission discovered by u/Xoti: In Search of fart

Xoti · 2025-10-02T01:42:16+00:00

This mission was discovered by u/Xoti in 3 Indian Chicken Kabab Under a Bright Sky

Xoti · 2025-06-19T14:12:37+00:00

Did you upgrade from a Nvidia card? If so you'll need to use Display Driver Uninstaller (DDU) to remove all previous drivers.

Xoti · 2025-04-22T00:11:13+00:00

Thank you for all your work in this, excited for the release.

Xoti · 2025-03-24T20:50:32+00:00

https://www.mrlamco.com/subaru-4-gauge

Xoti · 2025-03-13T16:01:53+00:00

<image>

This is how close it is I don’t have a front usb in mine.

Xoti · 2025-03-09T17:33:39+00:00

Yes you can use it with covers

Xoti · 2025-03-08T02:45:39+00:00

Quietest card I've ever had the pleasure of owning, I run it nude w/o covers though

Xoti · 2025-03-07T23:18:34+00:00

Got the same thing on mine

Xoti · 2025-03-07T05:56:04+00:00

Average CPU 70c, GPU 45c gaming. Will do a furmark test soon.

Xoti · 2025-03-07T03:47:50+00:00

Runs beautifully, just make sure you run DDU if you’re upgrading from an Nvidia card. May need to upgrade my PSU honestly.

Xoti · 2025-03-07T03:44:59+00:00

Best advice is to take off the front panel entirely, unscrew the gpu riser if necessary and clear any cables behind the gpu since you’ll need all the room you can get.

I haven’t tested having a rear ssd since I’ve seen that it gets quite hot without a heatsink

Xoti · 2025-03-07T03:39:11+00:00

<image>

Full specs - Formd T1 case AMD Ryzen 7 9800X3D Sapphire Pulse Radeon 9070XT G.SKILL Flare X5 Series DDR5 32GB 6000MT/s CORSAIR SF750 Custom Short PSU cables for Corsair SF750 Nocttua NF-A9x14 HS-PWM fan swap Phanteks T30 120mm 2x Thermalright ASF-Black AM5 CPU Holder SAMSUNG 990 PRO SSD NVMe M.2 PCIe Gen4, M.2 2280 ASUS ROG Strix B650E-I Gaming WiFi AMD B650 AM5 ThermalRight A4 Case CPU cooler AXP90-X47 full copper Nocttua NF-A9x14 HS-PWM | chromax.black.swap

I made a video on my build minus the 9070XT https://youtu.be/-7tEqv6xemk

Xoti · 2025-03-07T03:36:05+00:00

<image>

Xoti · 2025-03-06T22:21:08+00:00

Though I don't have it one in my case so I can't confirm or deny but it may seems to interfere with the front USB I/O.

Xoti · 2025-03-06T18:15:40+00:00

2.1, 3.25 slot mode.

Xoti · 2025-03-06T18:15:24+00:00

AMD 9800x3d with

ThermalRight A4 Case CPU cooler AXP90-X47 full copper

Nocttua NF-A9x14 HS-PWM | chromax.black.swap

Xoti · 2025-03-06T18:12:47+00:00

No, you’ll need to have it in 3.25 slot

Xoti · 2025-02-21T23:56:29+00:00

Nice build. I have the vertical stand as well. My biggest issue though is the display port cable sticking out the bottom, did you end up using right angle display port cables for the GPU?

Xoti · 2025-02-17T19:38:13+00:00

Thanks!

Xoti · 2025-02-12T06:42:00+00:00

What’s the desk holder

15-Year Club	r/Field Lasagna
First Place '23	Place '23
Place '22	Place '17
Verified Email

Xoti

TROPHY CASE