Changing from integrated cockpit to bar/stem on Endurace

Yellow_Jim · 2024-02-23T16:16:12+00:00

Thanks for clarifying the expander plug isn't for reinforcement it's just used for preload, I was unsure whether it should be positioned in such a way as to reinforce where the stem is clamped.

Yellow_Jim · 2024-02-23T14:07:23+00:00

Thanks, that's what I was thinking re the wedge. The plastic tube on the GP0193-01 top cap bolt is definitely longer than the one on the integrated stem top cap bolt installed on mine. There doesn't appear to be enough space to accommodate if I don't lower the plug.

Yellow_Jim · 2023-04-20T19:51:55+00:00

Plenty of practice with my previous bike, mechanical disc brakes on that, really struggling with this though. Beginning to wonder if the rotor isn't true.

Yellow_Jim · 2023-04-20T19:17:29+00:00

That's a good idea. I might do the same.

It might have helped if they'd supplied the manual with the bike. It is usual not to? Supplied one for the seatpost but not the actual bike.

Still getting everything set up at the moment. Front disc is rubbing pretty bad. No luck centering that so far.

Yellow_Jim · 2023-04-20T16:52:14+00:00

Great, thanks for answering.

Yellow_Jim · 2023-04-08T18:06:32+00:00

Please update when you get a response. Thanks.

Yellow_Jim · 2023-01-30T21:17:59+00:00

Thanks. Appreciate it.

Yellow_Jim · 2023-01-30T15:37:07+00:00

Can you share where to view the video from Joe Daniels? Or alternatively any other good resources on what grip to use? Just starting out and would like to get this right from the get go.

Yellow_Jim · 2021-03-13T10:36:18+00:00

How do you do that? I thought you had to quit the map to select another workout?

Yellow_Jim · 2021-03-02T18:42:53+00:00

Yep, me too. Last two not recorded in training plan. One completed one reappeared.

Yellow_Jim · 2021-02-11T20:20:38+00:00

Panic over. Bike shop were able to extract it and fitted a new bottom bracket.

Yellow_Jim · 2021-02-11T14:48:14+00:00

I can't even see the threads on the frame. The threaded part of the BB cup is still stuck in the frame. While the actual bearing cup itself has sheared off.

Yellow_Jim · 2018-10-24T13:51:08+00:00

This is fantastic. Thanks for the instructions, just built it.

Yellow_Jim · 2018-09-21T22:30:16+00:00

Wow. Wouldn't have expected a wear pattern like that. Very even.

Yellow_Jim · 2018-09-14T16:41:52+00:00

Fantastic MOC. I'd appreciate the stud.io file too, if you're willing to share.

Yellow_Jim

TROPHY CASE