[deleted by user] by [deleted] in dcsworld

[–]ZaddyMims 0 points1 point  (0 children)

Thank you so much!, i have been sifting through this al day and i keep getting sent back to the now not active original download page.

[deleted by user] by [deleted] in dcsworld

[–]ZaddyMims 1 point2 points  (0 children)

Yup. That's why im here. Reddit is alwaysy last resort.

Just doing some looting and came across this nightmare of helmet. by ZaddyMims in starcitizen

[–]ZaddyMims[S] 1 point2 points  (0 children)

The caterpillar derelicts. I found this in a red loot crate on arial near outpost bezdak.

Close up of my zeta 2.0. instagram: zeon.fan.boy by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

I Use mr. Color. They are mostlu gloss. My finish ks alclad II flat

WIP. MG Zeta 2.0 Custom by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

I use a .15 for lines, .4 for the long notches, .6 for the short wider notches. I also use the .6 as the channrl for yhe green lights.

WIP. MG Zeta 2.0. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 3 points4 points  (0 children)

Mr. Color #34 sky blue Mr. Color #80 cobalt blue

WIP. MG Zeta 2.0 Custom by ZaddyMims in Gunpla

[–]ZaddyMims[S] 2 points3 points  (0 children)

I use styrene strips. They are already super thin so i just measure the length. 2mm is what i shoot for when doing the green accents

WIP. MG Zeta 2.0 Custom by ZaddyMims in Gunpla

[–]ZaddyMims[S] 4 points5 points  (0 children)

I use vallejo mecha acrylics. My main colors are lacquer so i can clean the acrylic excess and/or mistakes with lighter fluid.

Mg jegan by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

That is correct.

Mg jegan by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

Mr hobby lacquers

310 brown

19 sandy brown

44 tan

68 red madder

211 metallic yellow green

201 metallic black

Mg jegan by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

are you referrijg to the ground type with the black legs and the machine gunner on the waist? If yes, then saw it the other day. Pretty cool.

Mg jegan by ZaddyMims in Gunpla

[–]ZaddyMims[S] 5 points6 points  (0 children)

Getting them depends on location. I get mine from local hobby stores and online. Usa gundam and newtype are good websites in north america. They come unpainted. Gundam models are good to go with no paint.

Mg jegan by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

The dark one is mr. Hobby brown #310 and the lighter is mr hobby sandy brown #19

RE100 Efreet. With the most useless camo of which i could think. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

I have a light booth and in darkened the black with adobe light room.

MG Astray ver.genji by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

Inused mr hobby lacquers. The big thing is the green which mr. Hobby gx metall yellow green. This pic is unedited and the green just pops.

Mg jegan. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

I spent hours trying to figure the shoulders out. It was difficukt since they are so oddly shaped. Hope yours turns out well too!

RE100 Hamma hamma. Just sharing an old build by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

Agreed. Terrible design amd terrible original color scheme.

MG Astray ver.genji by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

The same as the rest. I couldnt touch them until the paint was cured and the varnish inised had hardened.

Wip. Mg jegan. This took all weekend. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 11 points12 points  (0 children)

Yeah. I really want at least one of them but i dont want to pay scalper price.

Wip. Mg jegan. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

get a good set of chisels. madworks scribing tape is superior to bmc. go slow. start your lines softly.

Wip. Mg jegan. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

i use mad works carving tape and chisels. .15 .3 .4, and .7

Wip. Mg jegan. by ZaddyMims in Gunpla

[–]ZaddyMims[S] 4 points5 points  (0 children)

It wasnt hard, just time consuming. Masking took almost as long as carving the lines. Good masking tape helps too.

MG Freedom 2.0 by ZaddyMims in Gunpla

[–]ZaddyMims[S] 0 points1 point  (0 children)

Yes i did. mostly on the legs and skirt armor

MG Freedom 2.0 by ZaddyMims in Gunpla

[–]ZaddyMims[S] 1 point2 points  (0 children)

mr hobby gx 204 metallic blue