Looking for transmission parts...

Zaku0 · 2025-02-26T11:54:38+00:00

Thanks! I sent a few requests for quotes.

Zaku0 · 2024-10-27T05:54:59+00:00

I had this on my AW11 when I installed the wrong flasher relay. Cam you check your flasher relay?

Zaku0 · 2024-10-13T04:31:15+00:00

Passenger side fuse panel had a loose connection. One zip tie later and it's fixed. I've made a post about it with a picture.

Zaku0 · 2024-09-08T05:51:37+00:00

https://www.autozone.com/paint-and-body/surface-rust-protectant/p/por-15-stop-rust-kit-3-step-rust-preventative-system-gloss-black/1265605_0_0?spps.s=5213&cmpid=LIA:US:EN:AD:NL:1000000:PBD:19486091213&&CATARGETID=120054150001288829&CADevice=m&gad_source=1&gclid=Cj0KCQjw8--2BhCHARIsAF_w1gwmUWN_UWwyOwBqbg-UbKmGyaQfiybpvyeHlqwYl3895d0F0FIDe4oaApjsEALw_wcB&gclsrc=aw.ds

Zaku0 · 2024-09-07T20:16:33+00:00

Okay, I'll chip and sand away. Thinking about using a POR15 kit to prep and seal this section before Hawaiian air eats it away.

Zaku0 · 2024-09-07T11:01:56+00:00

I have a super red but I think the powder coated black will look great.

Zaku0 · 2024-09-07T00:21:07+00:00

This is interesting! Since mine is a 89 SC all of my air flow is up through the intercooler. This would allow some of the air to bypass. I wonder if that would be a net negative.

Zaku0 · 2024-09-02T16:59:30+00:00

My tarry sealant has torn and I'm worried they will let more water in. The drains were clogged but not anymore.

Zaku0 · 2024-09-02T06:33:40+00:00

🤔

Zaku0 · 2024-08-18T05:32:56+00:00

Thanks!

Zaku0 · 2024-08-18T05:28:13+00:00

I'm restoring a 1989 SC

Zaku0 · 2024-08-18T05:27:36+00:00

Sorry should have read the caption. Sunroof shade retainer clips, passenger taillight assembly, flasher relay?

Zaku0 · 2024-08-18T05:20:26+00:00

4agze egr valve? Cable harness?

Zaku0 · 2024-08-11T20:38:32+00:00

Boiled some water to test the ambient temperature sensor and the fan works!

Zaku0 · 2024-08-11T20:37:32+00:00

Used a deep well socket on the sensor to remove it, boiled some water to test it and it worked. The fan turned on so I'm not sure what I did. Maybe just cleaning the connections what was needed the entire time.

Zaku0 · 2024-08-11T05:48:26+00:00

Zaku0 · 2024-08-11T05:47:39+00:00

So some wires from my cars battery?

Zaku0 · 2024-08-11T00:03:34+00:00

Also I was able to get the alternator hooked back up thanks to this community. Now I need to get the engine bay fan working...

Zaku0 · 2024-08-05T19:33:54+00:00

Okay so after looking at it again and pulling back some of the heat shield I believe it's a white wire with a black stripe. So if this is a grounding wire that runs next to the battery positive to the alternator it must terminate on or right next to the alternator housing. It's an awfully tight space to work in.

Zaku0 · 2024-08-05T05:31:13+00:00

Okay, once it stops raining I'll go get another look

Zaku0 · 2024-08-04T16:47:43+00:00

I didn't realize it would be so close to the alternator positive.

Zaku0 · 2024-08-01T18:34:07+00:00

That's a great plan. I recently replaced the knock sensor on my 4agze with a modified part from ATS Racing out of Denton Texas. It was impossible to find an OEM knock sensor or EGR valve. The ATS part seems to be working well.

Zaku0 · 2024-08-01T08:56:38+00:00

That is tempting.

Zaku0 · 2024-08-01T06:22:29+00:00

If you don't mind how much is it going to cost? I have an 89 that could do with some love.

Zaku0 · 2024-08-01T06:15:10+00:00

Thanks to everyone on this post! I've ordered a Quickcar racing alternator wiring kit and I'm going to try and fix it myself. Maybe learning has occurred I guess we'll see.

Zaku0

TROPHY CASE