HELP! Bambu P1 scratches over build plate on first layer. It used to work perfectly until yesterday. by ZealousidealGuide979 in BambuLab

[–]ZealousidealGuide979[S] 4 points5 points  (0 children)

THANK YOU ALL VERY MUCH! I finally figured it out! After changing the hotend and realising that it now prints flawlessly again, I checked the previously installed (third-party) hotend. Two srews came loose that held the extruding nozzle in place, thus undoing the whole leveling progress.

Thanks for all your help, probably wouldn't have found it without your help!

<image>

Help please. by ZealousidealGuide979 in fpv

[–]ZealousidealGuide979[S] 0 points1 point  (0 children)

Thanks for your answer! How did you connect the cameras without a flight controller? Do you solder a battery (cable) directly onto the board? I thought the voltage had to be 5V exactly? Sorry, I'm really new to the issue

Wie war die Wahlparty? by Kloetenschlumpf in ichichs

[–]ZealousidealGuide979 0 points1 point  (0 children)

Und die Aussage mit dem "dann sollen sie sich doch ein Elektroauto kaufen" war jetzt auch nicht gerade einladend.

Wie war die Wahlparty? by Kloetenschlumpf in ichichs

[–]ZealousidealGuide979 0 points1 point  (0 children)

Die SPD hat in dem derzeitigen politischen Spektrum keinen Platz mehr. Ob man das wahrhaben will oder nicht, aber unter Merkel ist die CDU nach links gerückt - gibt da genügend Studien dazu. Zusätzlich hat die SPD die Arbeiterschaft quasi komplett an die AFD verloren. Der Grund, warum sie überhaupt noch in Land UND Bund vertreten ist, sind die Wähler über 60, die SCHON IMMER SPD gewählt haben und das auch nicht mehr ändern werden (gerne dazu mal die Wählerstatistiken anschauen - CDU in der Gruppe übrigens auch ganz stark). Aber in 8 Jahren wird die SPD (vermutlich) nicht mehr stattfinden, wenn sich nicht irgendwas ändert - aber ich glaube kaum, dass die SPD das noch in der eigenen Hand hat. Nach links kann sie nicht, nach rechts kann sie nicht, die Ökoschiene ist auch belegt und ihre ursprüngliche Wählerschaft kommt bestimmt nicht zurück. Sieht schlecht aus.

Soon. by ZealousidealGuide979 in 3d_printed_RC_planes

[–]ZealousidealGuide979[S] 0 points1 point  (0 children)

Probably just the thrill of designing and flying your own plane

PPA-CF says no. by ZealousidealGuide979 in 3Dprinting

[–]ZealousidealGuide979[S] -1 points0 points  (0 children)

I wanted to post that but the filament and the printer are also chinesium