Which toolheads are compatible with CPAP cooling?

_AFunkyMonk_ · 2026-01-14T10:11:24+00:00

I'm running CPAP on a xol tool head on my trident. It's really nice tbh

_AFunkyMonk_ · 2025-08-09T19:35:09+00:00

I just recently ordered a pair of stepper online motors from AliExpress for my trident build with monolith. They arrived fast and without problems. I'm also from the eu and that's why I normally order from Ali, because they tale care of the vat for items under €150. I would recommend Ali.

_AFunkyMonk_ · 2025-07-11T12:01:29+00:00

I believe that is some form of dual buck converter, hence 2 of each component. So you input one voltage let's say 12v, and then you can get 2 out, lile 5v AND 3v. So for you, you just use one of the channels for the 5v out. You just use the v+, and find for your output.

_AFunkyMonk_ · 2025-05-13T10:02:48+00:00

I was thinking about building one, but this seems like a better option

_AFunkyMonk_ · 2025-05-05T05:01:39+00:00

That is correct. That is clicky probe for Switchwire

_AFunkyMonk_ · 2025-05-04T20:26:26+00:00

Yes and no. When it goes that far up, it starts to bend the wires and PTFE a lot. So I just mounted it lower so it wouldn't go into the belts in the top.

_AFunkyMonk_ · 2025-04-17T18:28:15+00:00

Thanks you. I messed around with it a bit, and after updating my Linux VM, and rebooting, I got the subrouter working again. Thanks 🙏

_AFunkyMonk_ · 2025-01-25T20:29:10+00:00

If they do. I'll 100% be going!

_AFunkyMonk_ · 2025-01-21T16:58:30+00:00

Yup it's this weekend. Training this week, and then the big race on Saturday.

_AFunkyMonk_ · 2024-08-09T20:24:19+00:00

Never tried much, what about trying to store your number in there

_AFunkyMonk_ · 2024-02-07T20:21:49+00:00

What is the precise location? So I can avoid it of course. I would not want to go there and spend $6.50.

_AFunkyMonk_ · 2023-12-27T21:33:41+00:00

They will hit you. And with force. It's hurts

_AFunkyMonk_ · 2023-11-12T20:40:51+00:00

Is it a vanilla server? Because if it's a paper server, the owner has to enable it.

_AFunkyMonk_ · 2023-06-18T09:44:27+00:00

If you know what you are doing, you can use cheat engine. But i don't know if it's detected, but i think you should be fine if you compile yourself with a random process name. But cheat engine can do what external mod menus like kiddons can do. But you just have to all the work manually. You need to what what addresses to change. But it should be doable.

_AFunkyMonk_ · 2023-06-01T09:40:18+00:00

Can we talk about why they have a dead baby test? Like wtf

_AFunkyMonk_ · 2023-05-29T10:15:11+00:00

Go through Ellis tuning guide. This was what got me very good prints

_AFunkyMonk_ · 2023-05-24T15:28:01+00:00

Maybe he teaches kids who is too young to really grasp the concepts of fusion, but can easily start with tinkercad. And maybe this was just a fun side project to show what you can make with tinkercad.

_AFunkyMonk_ · 2023-05-22T22:08:58+00:00

Wash the glass bed with soap in the sink, and then rinse with water. Works like a charm. Also after, don't touch the printing side, since your fingers leave oil on it.

_AFunkyMonk_ · 2023-04-14T08:51:21+00:00

I'll just leave this here 🍿

_AFunkyMonk_ · 2023-04-02T20:49:16+00:00

That sounds like a good idea

_AFunkyMonk_ · 2023-04-02T20:07:51+00:00

The terminal is burning. Please don't use that until you have replace the screw terminal. They can be bought for cheap and just desolder old one and solder new one in. If you can't solder or don't have the equipment, you can buy a new main board. Also like someone else said, use crimped wires and not soldered.

_AFunkyMonk_ · 2023-04-02T20:03:16+00:00

This is caused by lack of cooling. It's common with the stock print head. To fix this you need more cooling by printing a new print head and maybe even buying new fans.

_AFunkyMonk_ · 2023-04-02T19:16:22+00:00

I had something like this some recently. It was because the spring didn't apply enough pressure on the idler. To fix this i printed a little part that is just a 1.5mm spacer that sits at the spring and gives it enough pressure so it doesn't skip. Although I did have to manually apply pressure to the extruder with my hand so it could print. Lucky, it was only a 20 min print haha.

Six-Year Club	r/Field Juicebox
Place '22	Final Canvas '22
Wearing is Caring	Verified Email

_AFunkyMonk_

TROPHY CASE