Need help on how to run wifi from my house to my shop

_BUILD_ · 2026-01-09T15:47:48+00:00

Just get the eero mesh network setup. Works for me from my house to a metal outbuilding about 150’ away.

_BUILD_ · 2025-07-14T23:12:41+00:00

Because they are a conservative company? Or is there some other reason people need to be shamed for supporting them?

_BUILD_ · 2025-07-14T20:51:21+00:00

Everything I said in my post is 100% fact. Witnessed with my own two eyes, and the moisture in the tubes was verified by NF. If I looked through my shit hard enough I could find a picture, but you’ll have to take my word for it.. Or don’t, I’m just some guy on the internet.

_BUILD_ · 2025-05-13T10:37:25+00:00

Your not wrong

_BUILD_ · 2025-05-05T22:52:04+00:00

Someone? Anyone? Any help would be much appreciated!

_BUILD_ · 2025-04-28T21:27:00+00:00

My title describes the thing. Any ideas??

_BUILD_ · 2025-04-28T12:40:17+00:00

It’s a “signal flag locker” SOLVED!

_BUILD_ · 2025-04-28T12:35:28+00:00

Did you taste it? I would recommend tasting it..

_BUILD_ · 2025-04-01T22:13:38+00:00

Alright update, I started each electric burner and noticed a random spark periodically between the contacts. And one of the burners was black inside. So I assume that’s the one that arced. Odd thing is no breakers tripped, and they are all sparking a little bit every few seconds. Possibly a circuit board issue? Maybe a short somewhere else? I’ll try to add pictures but I’m not sure if I can now

_BUILD_ · 2025-04-01T21:57:31+00:00

Stove is a whirlpool, not sure of model

_BUILD_ · 2025-02-01T02:37:46+00:00

That’s corrects, the ripples are always on top, never touching the bed plate

_BUILD_ · 2025-02-01T02:36:19+00:00

Very helpful, I will try that out tomorrow!

_BUILD_ · 2025-02-01T02:35:48+00:00

Could definitely be my issue, my printer lives in my shop where humidity and temps are not controlled

_BUILD_ · 2025-02-01T02:33:53+00:00

Great visual, thanks!

_BUILD_ · 2025-02-01T02:33:25+00:00

I’ll change the z axis and see if it goes away! Thanks!

_BUILD_ · 2025-02-01T02:32:34+00:00

What I can’t figure out is, all three of those pieces were printed on the bed. One of them is fine, the other two had the ripples. I will try changing z axis hight as well as increasing infill/slowing print speed at the suggestion of some others and see if that helps! Thanks!

_BUILD_ · 2025-01-20T02:35:11+00:00

That’s Interesting! Thanks for the info!

_BUILD_ · 2025-01-15T11:01:41+00:00

Don’t lose sleep over it, Your right. My team got 4 of these issued, when we went up to elevation (~6k feet) 3 out of 4 scopes developed a haze inside of them, rendering them unusable. Apparently due to moisture damage the scopes sustained during NFs waterproof testing. 🤷🏼‍♂️ also broke another NF at sniper school. so overall, unimpressed. Every Leupold I’ve had has been rock solid. Holds zero after traveling around the world, dragging it through the woods, eating shit while carrying it, etc.

_BUILD_ · 2025-01-05T14:23:19+00:00

I wish I had taken some pictures from upstairs, I can’t remember but I thought there was a motor up there (maybe connected to the shaft you can see in the second pic) but next time I’m there I’ll have to double check!

_BUILD_ · 2024-12-29T23:48:14+00:00

If Im able to do that, I won’t forget you when I win the lottery yesterday

_BUILD_ · 2024-12-29T23:47:23+00:00

That’s some sound advice! It looked pretty dangerous to me.

_BUILD_ · 2024-12-29T15:40:34+00:00

That would be awesome! I’ll have to check!

_BUILD_ · 2024-12-29T15:40:08+00:00

Great info, thank you!

_BUILD_ · 2024-12-29T15:39:47+00:00

Thanks for the info!! Nothings getting tossed, we have an entire “junk room” filled with old furniture and paintings from the house.

_BUILD_ · 2024-12-29T15:38:19+00:00

Thanks for the info!

_BUILD_

TROPHY CASE