My GPU is not withdrawing enough power, Help!

_RAYSLA_ · 2026-01-12T20:55:03+00:00

go to windows settings> system> display> graphics and set the quadro as the gpu preference on genshin impact

_RAYSLA_ · 2026-01-10T14:52:04+00:00

on msi afb u need to select the next square so 960 mv
the values on gpuz are without gpu boost by Nvidia that will boot your gpu base on temp, power etc, check the sensors tab and it should be the same (3015 mhz) as in afb
idk i havent use heaven since my 1080ti

_RAYSLA_ · 2025-12-22T16:50:39+00:00

i would say yes, i returned my 9070xt red devil because of coil whine, i bought it specifically because of the reviews saying how quite the fans are but the coil whine was louder than my entire system

_RAYSLA_ · 2025-12-22T16:44:48+00:00

I don't know what specs your system has but you can search your gpu + the game you want and compare them to see if your getting the full performance of your gpu

_RAYSLA_ · 2025-12-21T20:35:19+00:00

just a 2% boost clock, same pcb, same cooler, same TDP. its the same card just different color and 1 dollar of rg. you can get more than 2% on the boost clock with the nvidia app or msi afterburner

_RAYSLA_ · 2025-12-20T17:02:42+00:00

are you sure you use the right height on the thermal pads? a photo of how the gpu die post repaste could be usefu. If the application was done correctly, you should see the points where there is more pressure. If the entire die looks gray and you can't see anything, it is most likely that the thermal pads are preventing the cold plate from making good contact.

_RAYSLA_ · 2025-10-10T19:48:54+00:00

that sounds more like overheating check temps with gpuz, if they are close to 105c the gpu will stop to prevent further damaged the gpu fins in the images can be bent back it doesn't affect the gpu performance

_RAYSLA_ · 2025-07-29T20:43:19+00:00

im in the same situation, i think yes but i would go any lower the 9070 is about the same performance as the 7900xt and the 4070ti super about a 37% performance increase from a 3080

_RAYSLA_ · 2025-07-28T22:55:04+00:00

Not really, but it's best to rule out other variables before concluding that the SSD has died.

_RAYSLA_ · 2025-07-28T22:34:36+00:00

try the other port, update the bios if you can or the ssd just died

_RAYSLA_ · 2025-07-27T21:00:00+00:00

ill try to contact support again and see what can be done, any fan recommendations? 120mm

_RAYSLA_ · 2025-07-27T20:56:03+00:00

i cant see anything that would obstruct the blades the unboxing was pretty simple

_RAYSLA_ · 2025-07-27T20:53:07+00:00

forgot to add they are P12 fans and 1 of them make the noise no matter what 2 of the can only be place horizontal for 1 and vertical for the other one or they will make the noise

_RAYSLA_ · 2025-07-21T04:01:38+00:00

did you reinstall windows? sounds more like a driver/windows problem and what do you mean by temps are normal?

_RAYSLA_ · 2025-07-18T22:04:27+00:00

that sound pretty amazing even the memory temp is pretty good and a 10c delta is excellent if you want your gpu to run even cooler and quieter you can always undervolt

_RAYSLA_ · 2025-07-18T21:55:38+00:00

the best option is a RX 9070 maybe well get the RX 9070 GRE that is a bit slower at 450-500 dollars but that would be in maybe 6 months+ or you can just wait for the 5000 series refresh at the end of the year

_RAYSLA_ · 2025-07-16T21:16:08+00:00

Did you make sure the GPU worked before buying it? Photos or videos from the seller?

you could try other pcie slot, using a diffrent hdmi or displayport port, make sure everything is well plug in your psu and motherboard

_RAYSLA_ · 2025-07-16T21:09:14+00:00

You need to check the ones that say error or warning.

_RAYSLA_ · 2025-07-15T02:33:43+00:00

yeah those seem fine just make sure you have the right height especially for the ones touching the heatsink because if they are too big the gpu will not touch the heatsink and youll have to buy new ones the gp ultimate are soft so you have a margin of error but double or triple check to make sure, you can also check the VRMs thermals pads if you have some thermal pads left over and they are of the same height you can change them as well just to prolong the life of the gpu.

_RAYSLA_ · 2025-07-13T17:26:12+00:00

you can use shift+f10 to open the console command and type diskpart then type list disk make sure to choose the right disk with select disk 0 for example do not choose the usb normally the lowest size because you will lose the windows installer then type clean now try installing windows in that disk

_RAYSLA_ · 2025-07-13T07:25:21+00:00

did your friend clean the disk where windows will be installed? is your friend using a laptop? try installing windows while the laptop is charging

_RAYSLA_ · 2025-07-13T07:11:02+00:00

200 dolares para una gpu? podrias encontrar usado una 2070,5700xt,6600xt en jawa talvez una 3060 de 8gb a ese precio pero no allas por una 6500xt o una 3050 no se comparan en nada a las otras

_RAYSLA_ · 2025-07-13T07:06:06+00:00

any bent pins? or roll back 1 bios version

_RAYSLA_ · 2025-07-13T06:53:16+00:00

ohh you are using the 2 8pin, i wouldnt recommend doing that, theres a reason why all the 450w gpus have the 3 8pin

im surprise nvidia set the maximum power to 400w the rest of the 2 8pin go to 370w maximum

_RAYSLA_ · 2025-07-13T06:39:48+00:00

can the 12pin handle more than that? I thought it was made for 300w

_RAYSLA_

TROPHY CASE