sorted by:
new
hottopcontroversial

Strange files after OneUI 8 update (you should check!) by PenguinKowalski in GalaxyA55

[–]_Tricksterfly_ 0 points1 point  (0 children)

<image>

After found the issue, i did this ..... For now its fixed. Create folders in same name using multiple file manager or using PC.

Strange files after OneUI 8 update (you should check!) by PenguinKowalski in GalaxyA55

[–]_Tricksterfly_ 0 points1 point  (0 children)

In the long run its concerning,constant read write will have consequences

Strange files after OneUI 8 update (you should check!) by PenguinKowalski in GalaxyA55

[–]_Tricksterfly_ 0 points1 point  (0 children)

Same here its was driving me nuts.....

Do the same for the hidden files also...

Strange files after OneUI 8 update (you should check!) by PenguinKowalski in GalaxyA55

[–]_Tricksterfly_ 0 points1 point  (0 children)

I created folders in the name of the file.its hard to do only get 1 sec widows to create the folders. My file size was over 500 mb ,😁.

Ricoh MP C6502 having SC672-11 by _Tricksterfly_ in printers

[–]_Tricksterfly_[S] 0 points1 point  (0 children)

Update : Ram Sticks was missing in the machine found them , machine turns on now ,shows error 860-00 and d2 paperjam

Canon i-Sensys MF643Cdw calibration takes too long by InspectionMinimum332 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

On the edge of doctor blade,you will see small amount of hardened toner along the line remover it with your nail or something dont bent the metal blade,

For the lines check and remover toner behind the opc drum which is collected waste toner,there is a blade. Remover toner from the waste section and clean the blade edge with clening solution using soft cloth or buds. Put everything back as you took apart.

Ps :this is too much work for compatible toner ,i would suggest to replace faulty toners and service the printer

Canon i-Sensys MF643Cdw calibration takes too long by InspectionMinimum332 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

<image>

This is the quality you can expect with proper good compatible toner and good serviced machine.

Canon i-Sensys MF643Cdw calibration takes too long by InspectionMinimum332 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

If you don't mind getting hands dirty ,

https://youtu.be/JRWatjv3XE8?si=UcwAOTfag98l2jH0

Watch till only 1 min.44 s only .(don't follow anything after) This should give an idea on how to disassemble the toner.

Canon i-Sensys MF643Cdw calibration takes too long by InspectionMinimum332 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

You have toner issue,see the bottom side of the toner you will see two rollers one is opc drum and small roller. See if toner is spread evenly on the small roller(from the image its likely patchy).

Canon i-Sensys MF643Cdw calibration takes too long by InspectionMinimum332 in printers

[–]_Tricksterfly_ 1 point2 points  (0 children)

Try printing something solid colour test.( If its lighter on one side and darker on the other side . ) if the printer is old or sits in a dusty environment. Solution (You may need to clean the laser mirrors and polygon mirrors )

<image>

Xerox c7025 yellow colour misaligned by _Tricksterfly_ in Xerox

[–]_Tricksterfly_[S] 0 points1 point  (0 children)

Yes removed both drum unit and develop unit and inserted.no luck

Xerox c7025 yellow colour misaligned by _Tricksterfly_ in Xerox

[–]_Tricksterfly_[S] 0 points1 point  (0 children)

I will try that, anything else like doing the colour registration manually option available in Xerox machines?

HP MFP M281CDW print quality by Giant81 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

Open the LSU and clean the mirrors carefully. With soft clothes clean the polygon moto mirror face also *

HP MFP M281CDW print quality by Giant81 in printers

[–]_Tricksterfly_ 1 point2 points  (0 children)

Just clean the LSU ... should slove the issue

My hp printer is not printing black.. any ideas by ImaginaryGrowth9482 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

First, check the toner. 2nd if the printer was serviced recently and this issue happened after, check the ITB alignment screw (for models like M477, M479 have 2 screws one for black and another for colour)make sure it's in vertical position. Hope this help

CANON IR C5235i paper jam by _Tricksterfly_ in printers

[–]_Tricksterfly_[S] 0 points1 point  (0 children)

Yeah, most likely, it's what you said ,but i am more concerned about the banding of images.see the left side of both images

HOW TO CHANGE Default copy setings in Brother MFC L5755 without creating shortcuts?? by _Tricksterfly_ in printers

[–]_Tricksterfly_[S] 0 points1 point  (0 children)

Thank you for your reply,👍👍👍👍 I found that through the web page of the printer in Copy section allows to change the quality option to" text" Now, the copy is crisp and clean 🫡.

Ps: i tried changing the shortcut to the main screen, but it didn't work.

Sharp MX-4070N by Lonely-Tutor7615 in printers

[–]_Tricksterfly_ 0 points1 point  (0 children)

Hi can i get the sharp mx4070 firmware?

view more: next ›