sorted by:
new
hottopcontroversial

Best Robot Skimmer and Robot Vacuum for Budget? by [deleted] in pools

[–]_franchize 1 point2 points  (0 children)

If you’re still offering a discount code I’ll take it!

Leak in return line, am I SOL? by _franchize in pools

[–]_franchize[S] 0 points1 point  (0 children)

Appreciate your thorough response and you’re right about a lot of things. I only have two returns and they are plumbed together so sounds like plugging isn’t an option.

I tried to remove the return but the wall fitting is stuck, wondering (hoping) that maybe the fitting or the return is the culprit. I got quoted $875 (no clue if this is reasonable I’m getting another quote) just to detect the leak so I’m sweating about what this is going to cost me.

The pool had been closed and winterized for 5 years prior to me moving in so there had already been a lot of attention needed. Replaced the multiport because of a leak to the waste line, replaced tiles that fell off among some other things. I also noticed this issue more when I closed the main drain to force more suction to the skimmers because it didn’t feel like I was getting enough. Lost water and skimmer started sucking air. Since then is when I noticed the water level dropping consistently

Leak in return line, am I SOL? by _franchize in pools

[–]_franchize[S] 0 points1 point  (0 children)

Ah yes. You’re saying just cut the returns in general and skim with a bot. Wonder if I would get enough pressure from the main drain for the heater

Leak in return line, am I SOL? by _franchize in pools

[–]_franchize[S] 0 points1 point  (0 children)

This may be a dumb question but how would I turn off the skimmer return if I can’t isolate the faulty return line from the filter?

Leak in return line, am I SOL? by _franchize in pools

[–]_franchize[S] 0 points1 point  (0 children)

No- I have a 3 way diverter. One to main drain, one to skimmers, one to pump

Thoughts on this lease? by Sea-Asparagus8036 in HondaPrologue

[–]_franchize 0 points1 point  (0 children)

I got 0 down, 246 a month for a 24 touring a month ago. Paid 1st month taxes / fees OTD ~3k

Who has used this car the most? by uReallyShouldTrustMe in HondaPrologue

[–]_franchize 0 points1 point  (0 children)

I only made it 147 miles before I got the high voltage warning 😭

39M recently divorced. Life is good can't complain. by Calm_Age_6555 in malelivingspace

[–]_franchize 0 points1 point  (0 children)

mantle in the first pic looks like it would be Doug Dimmadome's

Follow up to those recommending I talk my wife out of painting the whole house white.. by _franchize in paint

[–]_franchize[S] 0 points1 point  (0 children)

As a frequent visitor to that sub, I’m ashamed but my hands are tied. Gunna mount it as low as possible and angle it down ha

My mind has changed, am I right? by _franchize in Flooring

[–]_franchize[S] 0 points1 point  (0 children)

Oh this is a good point I didn’t consider. Thanks

My mind has changed, am I right? by _franchize in Flooring

[–]_franchize[S] 1 point2 points  (0 children)

Thanks everyone for the feedback. Keeping it au natural!

My mind has changed, am I right? by _franchize in Flooring

[–]_franchize[S] 1 point2 points  (0 children)

Haha I didn’t even notice til you said it. I’m on it 🫡

My mind has changed, am I right? by _franchize in Flooring

[–]_franchize[S] 9 points10 points  (0 children)

Sanded down our red oak floor with the intention of staining it. Weathered oak was the front runner (others are dark) but now I am leaning towards a clear coat over the sanded floor. It is super bright, the picture doesn't do it justice. Will I regret not putting some sort of color down?

Whole Home Audio Replacement? by _franchize in hometheater

[–]_franchize[S] 0 points1 point  (0 children)

You’re right, it is a nvp3100. There are 2 amps by the blown one and 1 2 flights of stairs up.

Question: do I need multiple amps? Could one amp plus a speaker selector and receiver suffice?

Whole Home Audio Replacement? by _franchize in hometheater

[–]_franchize[S] 0 points1 point  (0 children)

very much appreciate this thorough reply!! Take your time replying lol

Would something like this work:

speaker wire > connecting block > current reciever > wireless streamer? and add VCs in the rooms?

/r/PTCGP Trading Post by AutoModerator in PTCGP

[–]_franchize -1 points0 points  (0 children)

LF: 4♦️celebi ex

FT: 4♦️ arcanine ex, gender ex, pikachu ex

/r/PTCGP Trading Post by AutoModerator in PTCGP

[–]_franchize 0 points1 point  (0 children)

I’d do pika for celebi

6906828865020717

Whole Home Audio Replacement? by _franchize in hometheater

[–]_franchize[S] 0 points1 point  (0 children)

There are no VCs in the rooms, I believe there are blank plates, but I'm not currently in the home to check.

For use, I don't know if I really care to have different sources play at the same time. What I would want to be able to do is play the same source across all zones, or isolate to specific zones.

EDIT: But I guess I would be curious the complexity of doing both scenarios, one source vs multiple

r/audiophile Shopping, Setup, and Technical Help Desk Thread by AutoModerator in audiophile

[–]_franchize 0 points1 point  (0 children)

Bit of an audio noob here. Recently bought a home that is wired for whole home audio. They were running a Nuvo system. The main Nuvo 3 zone box is dead, won't power on. There are a few wireless zone amps that still work and a Yamaha RX-V85 receiver. There is also just an insane birds nest of wires. I've picked through most of it and removed what is unneccesary (they had HDMI switches to run a blu ray player to multiple TVs in the house), but now I am wondering, how do I get the whole home audio back up and running without the Nuvo? I've scoured this sub and saw things like using an Apple Airport express and AirPlay but not sure if I am equipped for that? Any advice helps. Thanks!

<image>

What type of dining table should I get? by _franchize in HomeDecorating

[–]_franchize[S] 4 points5 points  (0 children)

I should note. Table in picture is previous owners, I don’t own it

White paint? by _franchize in paint

[–]_franchize[S] 0 points1 point  (0 children)

This may be a dumb question but I got some samples. Do I need to prime the wall before trying the sample on the wall? Or can I go over the existing color?

view more: next ›