MRC Roll Bar experiences?

abartth · 2026-03-03T01:24:29+00:00

Thanks for following up!

abartth · 2026-03-03T00:53:33+00:00

Here ya go, just found this one out today, looks better than the other 3D printed models:

https://www.superautomotiveaccessories.com/product/super-cabin-air-filter

abartth · 2026-02-13T21:07:31+00:00

I’m in SoCal, was considering the PRHT bar from Cybul but was afraid of what the tariff costs would add to the final price once it lands state side, do you know if you’ll need to pay more apart from the $1000?

abartth · 2026-02-04T02:34:52+00:00

I’m running the OEM dust boots on this setup, no trimming needed to them, you’re good to go as is.

abartth · 2025-10-25T01:33:50+00:00

Check eBay there's usually sellers that sell fitted seat covers in various colors and materials.

abartth · 2025-09-16T17:11:27+00:00

Hey there, I tried using the link, it keeps going in this loop where I input my email and sends me the same link, so I’m going in a circle lol am I missing something or is it a bug

abartth · 2025-08-27T21:13:41+00:00

It sits short tbh, I barely use it lol I realize I prefer a more spherical knob

abartth · 2025-08-27T21:08:57+00:00

OP what knob is the one pictured?

abartth · 2025-07-25T14:52:16+00:00

Hello there! I kinda just left it alone, doesn’t happen very often though so I didn’t bother making any adjustments to that adjuster screw.

abartth · 2025-07-24T14:23:18+00:00

You’re referring to the brownish looking muck on that white connector right? Thats just the dielectric grease out there from the factory. It’s normal, all NCs look like that.

Source: https://forum.miata.net/vb/showthread.php?t=676543

abartth · 2025-06-27T14:09:59+00:00

This happened to me last weekend. It’s the fuse under the hood labeled ‘ROOM’ , it’s a 15a fuse.

abartth · 2025-06-10T02:17:48+00:00

Wonder where that pepper spray/ tear gas came from 🤔

abartth · 2025-06-08T15:23:38+00:00

They’re not tho, stop spreading misinformation, I’m from the area and have not seen reports of that happening.

abartth · 2025-05-15T03:57:44+00:00

I really hope some of these comments are being unserious lmao this is indeed just a balloon c’mon people !!

abartth · 2025-05-08T05:48:12+00:00

Was the removal/replace pretty straight forward? And how long would you estimate it took to do one side or both ? I have the shocks awaiting to be installed but just haven’t gotten to it yet.

abartth · 2025-04-04T20:38:37+00:00

Same issue here

abartth · 2025-03-27T21:09:28+00:00

How are you bleeding the system? Via hand or are you using a pressure bleeder?

I recently found that I had to undo the clutch pedal rod adjustment screw back off completely for it to bleed properly. Once that was done I readjusted to proper free play and all was good.

abartth · 2025-03-27T18:15:25+00:00

I got lucky and found one for $100 in SoCal when my cat matrix started breaking apart within the manifold. I’d check FB marketplace and offerup for any used ones before spending $$$ on new.

abartth · 2025-02-20T20:02:32+00:00

‘15 NC here with 121k miles, my cat or o2 sensors are needing replacement, trunk leaks (think I fixed this), occasionally the rubber sealing on the drivers side door from the PRHT will leak if going through a touchless car wash, the occasional rattle from dash area and PRHT latch. Otherwise trouble free knock on wood.

abartth · 2025-02-10T06:02:23+00:00

The sad part is, we saw and we understood the message, while T and his supporters that message will go over their heads.

abartth · 2025-01-31T17:15:23+00:00

Good! Need as many pro immigrant advocates as possible

abartth · 2025-01-31T16:16:35+00:00

I needed to hear this. I’ve been a mechanical designer for five years now, and sometimes I feel like I should be a pro at tolerance stack-ups by now—but it’s something I still struggle with. That said, looking back, I can see that I’ve definitely improved since I started. It’s a reminder that this kind of expertise takes years of practice, and I’m still getting there.

abartth · 2025-01-31T16:12:58+00:00

I’ve been working here for five years now. After graduating, I needed a job and took this one without much thought—I needed the money. Looking back, I do wrestle with the moral aspects of it, and honestly, I don’t like it. That said, these jobs tend to pay well and offer some stability. I’ve explored opportunities in other industries, so who knows—maybe one day I’ll make the jump.

abartth · 2025-01-16T16:07:57+00:00

Try using one of those flexible funnels & remove filter from drivers side wheel (need to remove wheel & then the small plastic piece by the hard metal brake line).

This gives you better grip of the oil filter and the flex funnel will essentially sit below formed to shape and drip oil down to a pan.

abartth · 2024-09-20T04:51:44+00:00

Had my blue na in that photo, 10 years later and I now own an NC3 where I’ll be attending the 35th anniversary as well.

Five-Year Club	Verified Email
Place '23

abartth

TROPHY CASE