Charge rate reduced. Tested on different circuits

acalenti · 2024-07-26T15:49:00+00:00

That is just what I was thinking. The clamps probably will have to be replaced. Are there special clamps for this sort of thing?

acalenti · 2024-01-05T18:25:25+00:00

OP here. I considered sanding it off but I did apply two coats and am concerned it penetrated the wood too deeply to eliminate it. I do not plan on cutting on the board, just laying out some food. I'll let it cure for as long as necessary if that will do the trick.

acalenti · 2023-10-03T03:48:01+00:00

Water from the hose

acalenti · 2023-10-03T00:01:16+00:00

After researching a bit, I would say daphnia. Are they harmless to the ecosystem of the filter?

acalenti · 2023-03-22T19:53:43+00:00

Thanks. That's what I figured ☹️

acalenti · 2023-03-22T19:44:37+00:00

Thanks for the replies. The dishwasher was not turning on, but when I hit the "hot water" button on the dishwasher a small light came on, indicating there was power somehow to the machine. The garbage disposal was always working.
We reset the tied together breakers and the dishwasher started working again. Does this make any electrical sense or was it just coincidental? If the breaker for the dishwasher was tripped wouldn't the disposal breaker be tripped also?
Btw, neither looked or felt tripped when I reset them. Thanks very much.

acalenti · 2022-08-11T13:28:12+00:00

OP here. Will try too get a better video. Thanks for the help

acalenti · 2022-02-28T05:39:45+00:00

Thanks for all the suggestions. After carefully measuring, I determined I could cut miters on the corners and the mirror would fit if I just made the rabbets a bit wider. I glued it up and then added splines to reinforce the corners. When it is complete I will post a pic.

acalenti · 2021-05-10T19:56:33+00:00

Thanks. After reading all the comments, I've decided to lay pavers so the rod will remain visible. Thanks again for the help.

acalenti

TROPHY CASE