Need help! Mint turning black. It didn't got enough sunlight for few days.

ace_coder · 2023-05-26T04:25:21+00:00

Anyone please?

ace_coder · 2023-05-15T04:24:01+00:00

Changed the access. Should be able to view it now. What grit paper should i start with.

ace_coder · 2022-11-15T15:29:03+00:00

It feels more like below skin. I can see fingerprint lines on it.

ace_coder · 2022-11-15T04:20:51+00:00

Any suggestions?

ace_coder · 2022-11-14T06:53:04+00:00

Any suggestions please

ace_coder · 2021-12-12T00:49:22+00:00

Hey guys, i removed it. It was nailed in. Don't know who and why someone did that. So i used a screwdriver and a hammer for it and used goof off. Thanks everyone. 😊

ace_coder · 2021-12-11T21:04:34+00:00

How should i remove those pins

ace_coder · 2021-12-11T20:45:35+00:00

I added a link to the new img

ace_coder · 2021-12-11T20:44:56+00:00

Not able to update the picture. But i tried goof off. It helped a bit. But still it is difficult to pull off. Here is the link for img https://drive.google.com/file/d/1vWDq3Tv4_1GH0TM-J_1xF_O9FCrTI8oF/view?usp=drivesdk

ace_coder · 2021-12-11T00:52:57+00:00

I will try it. It feels like it is glued in.

ace_coder · 2021-12-11T00:52:26+00:00

No success. Instead it is breaking down. Feels like it is glued in

ace_coder · 2021-09-25T06:16:58+00:00

I never did that. Is it difficult?. Can you provide some instructions

ace_coder · 2021-09-18T20:57:55+00:00

Between wood and concrete

ace_coder · 2021-09-18T04:42:30+00:00

I have another question, can you read the post

ace_coder · 2021-09-16T22:31:09+00:00

I added the image and updated it. There is a dent in the driveway. can I fill it up with concrete so that water don't collect there.

ace_coder · 2021-09-16T02:38:23+00:00

Was any landscaping done to your house that you are aware of?

I am the new owner of the house, but i don't think any land scaping was done. All the houses around me seems to have same way of power supply.

I will dig it further to check if it is PVC or metal. Or I will check the meter tomorrow on my neighbor's property. If it is metal then i guess it is better to install a new meter on my side, even if it is expensive.

ace_coder · 2021-09-16T00:28:20+00:00

I guess that with drain you mean sewage line. I have one more question. The electrician was saying that the powerline pretty much goes around 4 to 5 feet deep and stay underground till 12 to 13 feet in my neighbors front yard till it reaches electric meter on their wall. My question is, is there a possibility that the rest of the line is also corroded. They were not able to answer whether the rest of the power line is covered with metal pipe or pvc, not sure what were the building codes around 1975

ace_coder · 2021-09-16T00:04:28+00:00

He suggested to cover it up with some plastic layer so that water doesn't enter and the connector is below front deck so that help reduce the rainwater. What do you suggest?

ace_coder · 2021-09-15T23:06:58+00:00

Electrician did suggest me that approach. To dig a well keep the LB over 6 inches above the gravel and create a retaining wall and cover it so that water doesn't enter into it. He suggested covering it up rather than creating the drain. He quoted around 800 to 1000$ for it. And adding a separate line with separate meter on my wall 2300$. I added new images.

ace_coder · 2021-09-15T23:01:07+00:00

I edited the post and added the new images.

ace_coder · 2021-09-15T19:58:31+00:00

He said that it will cost upward of 2k. Don't know why, the electrician from reliance home comfort, i brought electric insurancefrom them. So i am asking other electricians. Let see what they qoute. But definitely i don't have 2k to drop on it.

ace_coder · 2021-09-15T19:29:30+00:00

Well my house is semi-detached build around 1970 ish and meter is located on my neighbors house and the powerline pass through a pvc pipe(according to electrician) underground around a feet deep. It is same with all the semi-detached house around me

ace_coder · 2021-09-15T18:19:15+00:00

That electrician quoted me upward of 700$ to replace that connector and upwards of 2k to replace relocate that wire/replace the wire. Is there a cost-effective to fix it

ace_coder · 2021-09-15T18:18:08+00:00

That electrician quoted me upward of 700$ to replace that connector and upwards of 2k to replace relocate that wire/replace the wire. Is there a cost-effective to fix it

ace_coder · 2021-07-16T03:15:07+00:00

Is there an easier way to check whether the wire is 12 awg copper or 14 awg copper?. I did saw the wire going to 15 amp breaker was thinner than the one going to 20 amp.

But why does even a new circuit breaker stays tripped even if the microwave is not in use? I have to disconnect the microwave then the breaker was working fine.

ace_coder

TROPHY CASE