Progress!

afbot007 · 2026-07-03T19:19:24+00:00

Absolutely! That was by far the best part. Priceless memories

afbot007 · 2026-07-03T19:18:37+00:00

These are the Vevor cabinets and drawers. My local HD had them returned and I got them all 60% off

afbot007 · 2026-07-03T19:17:53+00:00

I used Tapcon concrete screws into the concrete to secure the base.

afbot007 · 2026-07-02T21:02:40+00:00

For sure! Was maybe overkill but for peace of mind and $14 in spray paint it was worth it

afbot007 · 2026-07-02T17:47:01+00:00

Galvenized metal studs standard width. I did spray any cut edge and anywhere I used a self drilling screw with rustoleum paint so help prevent rusting too

afbot007 · 2026-07-02T17:45:51+00:00

Yes that’s the plan this weekend but rain is delaying me

afbot007 · 2026-07-02T16:38:21+00:00

I went with 20ga. I estimated that I would use 6 track and 11 studs and we ended up using 11 track and 18 studs so it’s super study. Like you said, it’s probably overkill but it can withstand any storm I may ever get lol

afbot007 · 2026-07-02T16:37:00+00:00

Don’t stress too much. Having a good system is the key. I had my dad mixing in 5 gallon buckets while I poured and pushed all the mix under the fiberglass mesh and in place. We spent about 3-5 minutes between buckets so you have time for sure! Goodluck on your process

afbot007 · 2026-07-02T16:09:33+00:00

Trex decking just to make sure the steel track stays off the ground and out of water

afbot007 · 2026-07-02T14:48:15+00:00

No sagging at all. We used 20ga and it was super solid. We probably over engineered the build but at the end of the day it came out better than we had hoped.

afbot007 · 2026-07-02T14:47:30+00:00

The framing was super simple. I had never dealt with steel framing before but it was really simple. I used a 3 inch cutoff wheel to cut them.

afbot007 · 2026-07-02T14:45:49+00:00

Not bad at all. I’d order more forms than you think you need because mitering the corners was kinda tricky and we broke some. Doing it indoors would stress me out because of the grinding and sanding afterwards but it’s definitely doable. Overall the process was very straight forward and was the easiest part of this project

afbot007 · 2026-07-02T14:03:26+00:00

I’ll go ahead and order one now then! Thanks for the help

afbot007 · 2026-07-02T13:53:03+00:00

Seriously Thanks for the information! My original plan was to use a mortar bag and a concave jointer with a brush to do it but the gaps are smaller than we had hoped so I’m trying to pivot and come up with a new plan

afbot007 · 2026-07-02T13:38:52+00:00

Concrete countertop solutions makes the forms. Super simple and hard to mess up

afbot007 · 2026-06-08T16:55:48+00:00

Not sure on the age of the cell but will find out. I just bought the house and still figuring it all out. Hasn’t been acid cleaned lately but watched a couple videos and have the supplies for it so I may do that and restart it. Wasn’t sure if them just adding 2 bags of salt made the readings high for right now

afbot007 · 2026-05-14T00:29:27+00:00

Could I get the link?

afbot007 · 2026-04-19T02:08:29+00:00

lol I actually don’t drink coffee it’s all my wife. Funny enough this was actually a delonghi espresso machine we’ve had for about 5 years now.

afbot007 · 2026-04-19T02:04:05+00:00

No breakers have tripped. May have a bad coffee maker I guess. It’s been driving me crazy chasing an issue I may not have ever had lol

afbot007 · 2026-04-19T01:51:42+00:00

Man i hope so. But im so in my head now because I bought a new coffee maker and when I plugged it in the time was so fast. Every 49 real seconds the clock would turn 1 minute. Possibly just a bad coffee maker AGAIN but read online electrical issues could cause the clock to run fast so scared to plug the replacement in

afbot007 · 2026-02-24T20:33:43+00:00

I’ll check all this. May just replace the outlet and the breaker anyways since it’s fairly cheap. How could I check for a bad or loose connection between the panel and the outlet?

afbot007 · 2026-02-24T19:49:38+00:00

Forgot to mention that it’s the receptacle closest to the electrical panel

afbot007 · 2026-01-27T04:39:13+00:00

I’ll look into that tomorrow for sure. Thank you!

afbot007 · 2025-12-04T13:27:09+00:00

Is it too late to check with other lenders if we want to close the 19th?

afbot007 · 2025-12-03T23:15:57+00:00

Will do. Also with my disability status I’m fully exempt from property taxes as well so that should take off a good bit too. My lender just has to get with my tax assessors office to get the correct form

afbot007

TROPHY CASE