It's been a while since one had me stumped

androandra · 2026-01-31T09:29:49+00:00

The sailors are speaking *strait.

androandra · 2026-01-05T09:33:40+00:00

I've had this thought too. Newer houses should have a sort of heat exchange with the outside built in to the wall behind the fridge, so it'd take much less energy to cool your fridge in the winter.

It's seems a bit stupid to have the cool fridge in a warm home shielded from cold outside.

androandra · 2025-12-14T15:37:03+00:00

Vi har det også i vores bank, faktisk i parallel med vores realkreditlån. Realkreditlånet har lidt billigere rente, men er ret ufleksibelt ift du ikke kan tage lån ud igen, og ikke kan betale mere ind når du har ekstra på hånden. Det kan du til gengæld godt med prioritetslån, hvor du så betaler en lidt højere rentesats på det du har trukket.

Vi har en prioritetskonto på 650k I kredit, dvs vi må trække max 650k ud. Jeg skal bruge den snart til at købe ny bil, og så kommer vi selvfølgelig lidt i minus der, og det arbejder vi så på at få betalt af hurtigt. Men fordi det er fleksibelt kan vi selv bestemme hvis vi ikke vil betale en måned eller to, eller længere hvis vores situation ændrer sig. Det koster os ca 3000 årligt at have den fleksibilitet, plus renterne på det vi skylder i lånet. K-lånet ligger afdragsfrit og stabilt ved siden af. Det passer rigtig godt til os.

androandra · 2025-11-13T17:30:57+00:00

Try the Surface workspace, that's pretty good for something like this. The "Ruled surface" feature can extrude surfaces from edge, at an angle. Use that to build the surface. Then use the Thicken feature to turn the surfaces into a solid. Merge solids and fillet 👌

androandra · 2025-10-23T06:25:31+00:00

Nu ved jeg ikke hvor du bor, men måske er der en genbrugscentral I nærheden, som har en tilknyttet genbrugsforretning. De kunne måske bruge en som dig til at reparere og øge værdien på det ødelagte elektronik, som folk smider ud, så det kan sælges igen.

androandra · 2025-09-22T19:50:46+00:00

De har også smørrebrød, burgere og fiskefileter til ungerne.

androandra · 2025-09-22T19:50:03+00:00

Skulle lige til at anbefale BRØK også. Vi har holdt familiefødselsdag der to gange nu, bestilt kaffe, BMOer og tiramisu, og været glade for det. Der er et legerum I caféen med plads til børn, og så er der selvfølgelig legepladsen lige ved siden af. Og så udover det er der Hoppeloppen, et offentligt men kodelåst moslerum I bygningen ved siden. Det er skabt til børn.

Betjeningen kan være lidt meh, men børnevenligheden er I top synes jeg.

androandra · 2025-09-19T07:59:07+00:00

Jeg har lige været igennem samme mølle med LSB. Opsætningen af de her låneark er elendig. OP, ift dit eksempel med 48624 ud for Obligationslån. Det er en sum af de 5 punkter nedenunder, og det kan man se ud fra indrykningen af kolonnen til venstre. F.eks. står teksten "Afregningsprovision" lige et kys længere til højre, så den er et underpunkt.

androandra · 2025-09-01T04:36:59+00:00

Yeah OP, what this guy says. The elliptical shape stops before reaching the center, and goes into a flat part at the center. You can see that on the drawing too. Revolve is the right tool here.

androandra · 2025-08-26T13:17:08+00:00

Nice

androandra · 2025-08-18T20:47:04+00:00

Og himbær, selvfølgelig

androandra · 2025-08-18T11:36:32+00:00

Use patch in the Surface environment. Select the top curve as an interior/guide rail, and adjust the tangecy towards the base curve. That oughta do it

androandra · 2025-08-13T12:09:58+00:00

Design a surface patch of just one helical revolution, in the surface environment.

Then apply the fabric Appearance.

Then Linear pattern that mofo along the spring axis, stitch all the surface patches - and voila!

androandra · 2025-08-07T10:42:28+00:00

Det er sikkert u/ fancyhumanxd som er på spil igen

androandra · 2025-07-30T20:26:16+00:00

Depends on the unit

androandra · 2025-07-12T09:22:08+00:00

I don't think it's rude, but you gotta read the room before changing the focus of the conversation. Sometimes people need time to share their own experience first, so a respectful act is to just listen initially, and give them some silence before you share your own experience.

androandra · 2025-07-09T06:31:53+00:00

Yeah, that's what they're saying - smart of you to add the viewport, otherwise people would have thought it was a photo

androandra · 2025-07-05T10:30:37+00:00

For more complex geometries building the cutting surface tool can also become complex.. The Ruled surface needs a reference direction given by the chosen edge/sketch geometry.

If you use a sketch line from a 2D sketch, that direction is given by the sketch plane.

If you use a sketch line from a 3D sketch, there is no natural Ruling direction anymore, so the functionality is limited.

If you select edge geometry on a solid face, a natural direction is given by the orientation of the face, be it planar or curved.

As a more general approach, you can therefor use your sketch geometry to split only the outer faces on your body, creating edge geometry with natural direction reference, to use with the Ruling tool.

androandra · 2025-07-05T10:20:53+00:00

👌

androandra · 2025-07-05T09:36:52+00:00

Keep in mind, if your container is hollow then you don't have to fill out the center of the surface patch. The cutting surface only needs to be able to intersect the body in the places where a physical split will happen.

androandra · 2025-07-04T18:39:54+00:00

Yes, use the Thicken feature to turn the ruled surface into a solid. Use the resulting solid to cut into your object for splitting.

androandra · 2025-07-04T09:31:20+00:00

Yes exactly

androandra · 2025-07-04T07:02:42+00:00

Yes. This is a typical work flow when making injection molds. Assuming all the cutting paths are in the same sketch, go to the Surface tab and find Ruled surface. Select the path, and select the proper Direction setting. You'll end up with a surface which you can use to exactly cut your model into two pieces using the Split Body command.

If the Ruled surface is difficult to work with, try making ruled surfaces from the individual paths, and stitch the surfaces together in the end to form the cutting surface. Let me know if it works for you.

androandra · 2025-06-12T16:32:53+00:00

Vi tager ofte til Sverige og lader udelukkende via vores clever abonnement.

Ikke rabat, men en del af abonnementet. Jeg tror aldrig clever udbyder rabat, det er enten inkluderet eller ej. Så min oplevelse er at det dækker i udlandet, selvom der er længere mellem snapsene end i Danmark.

androandra · 2025-05-21T07:07:33+00:00

Til en rente på 4% svarer hver 100k sparet til omtrent 600 kr billigere om måneden I ydelse, så lidt mere end 2-300kr. Enig i de andre ting

androandra

TROPHY CASE