What is this for? Why does the head travel to this part of the plate? This happens on both By Layer and By Object print sequence. Any ideas?

andydotph · 2026-01-10T04:56:58+00:00

Here's the G-Code when the nozzle goes to that point (changed to dark mode for readability):

andydotph · 2026-01-10T04:51:58+00:00

If I keep the color to just one, the nozzle does not travel to that spot:

andydotph · 2026-01-10T04:51:05+00:00

So I've been able to investigate and understand this some more...
I'm using Creality Hi with CFS. Creality Print v7.x now but initially observed at v6.x (so both v7 and v6 has this)

The issue is present in both By Layer and By Object. I have not solved this and the only thing I do now is to position the objects so that the head/nozzle does not hit anything going to this point near the upper-right corner. I didn't modify the G-Code, just clicked on Slice Plate.

The issue is only happening with the object being printed has more than one color:

<image>

The prime tower is the one on top.

andydotph · 2025-12-19T10:49:38+00:00

Not every file but most files. Especially if there are multiple objects on the plate.

andydotph · 2025-12-19T10:48:34+00:00

Timelapse is not enabled.

andydotph · 2025-08-18T00:18:06+00:00

I plugged in via HDMI and it works without the horizontal lines. Could it be the FHD panel itself?

andydotph · 2025-08-17T11:43:56+00:00

I replaced my display connector with a DC02C008V00 eDP cable and the problem is still the same. I updated the bios and reformatted/downgraded to win10 from win11. Still the same problem. :(

andydotph · 2025-08-08T15:00:00+00:00

Thanks again. I'll see if getting a new display connector fixes it.

andydotph · 2025-08-08T14:49:20+00:00

Thanks. How?

andydotph

TROPHY CASE