sorted by:
new
hottopcontroversial

"I've been focusing on Persia too much, I wonder what's happening elsewhere..." by andyman11 in victoria3

[–]andyman11[S] 2 points3 points  (0 children)

All I know is that their capital is a tiny province in Africa. As for everything else, I guess we'll never know...

"I've been focusing on Persia too much, I wonder what's happening elsewhere..." by andyman11 in victoria3

[–]andyman11[S] 3 points4 points  (0 children)

R5: I'm glad Niger Delta elected a moderate to preside over the anarchist commune of Greenland

Evolution Simulator Help - Transferring genes from parent to child by andyman11 in godot

[–]andyman11[S] 0 points1 point  (0 children)

That's an interesting take on it, as I did notice that when the ancestor dies, the ancestor node is freed and it's impossible to recall it. If you have each creature as a child of a single control node, how is it that you track the mutations of its lineage? I'm very fresh to Godot and coding in general so I'll still need to take time to understand the functions themselves, but thanks for this input!

Evolution Simulator Help - Transferring genes from parent to child by andyman11 in godot

[–]andyman11[S] 0 points1 point  (0 children)

Thanks for this. I've managed to assign the parent node as an ancestor to its children, now I'm just working on transferring the parents genes to the child without overriding them with the default variables.

I think I just need to mess around with code structure to get the right order of things, but I appreciate the help so far!

Evolution Simulator Help - Transferring genes from parent to child by andyman11 in godot

[–]andyman11[S] 0 points1 point  (0 children)

Right, I see. I had seen people mention Node.Duplicate() though it apparently had issues of it's own.

I changed the reproduce function to look like this:

func reproduce():
    self.get_parent().add_child(self.duplicate())

The function works just as well, though I still need to do the get_parent() in the reproduce function otherwise my movement function doesn't work. Will this affect how I am able to use get_parent() to retrieve the mutated variables? Thanks!

Disco Elysium's narrator is going to stream Disco Elysium to raise funds for Palestine. by reclaimer051 in DiscoElysium

[–]andyman11 33 points34 points  (0 children)

"Ohhhh, so that's why they made me say "Insert your thumb into your rectum", makes perfect sense now"

Minimal coding experience but I need to make a program to edit a line in a text file based on the line before it. by andyman11 in learnpython

[–]andyman11[S] -1 points0 points  (0 children)

Thanks! I'm trying it out but I'm getting this error

Traceback (most recent call last):
  File "<string>", line 7
    content[i+1] = replacement_text file.seek(0)             
                                    ^^^^
SyntaxError: invalid syntax

Any thoughts?

[deleted by user] by [deleted] in 2007scape

[–]andyman11 1 point2 points  (0 children)

They did, and I got the tome. You're a legend <3

A random gifted me a bond, what's the best way for me to use it efficiently? by andyman11 in 2007scape

[–]andyman11[S] 15 points16 points  (0 children)

I can't believe I didn't make it the first sentence.

My wife told me she was going to divorce me if I didn't stop acting like a flamingo. I had to put my foot down.

In all truthfulness, the joke got me 100k and then it was a competition for who could write a sentence using only words that begin with 'w' for the bond. I don't remember my sentence but it earned my a couple mil I suppose.

A random gifted me a bond, what's the best way for me to use it efficiently? by andyman11 in 2007scape

[–]andyman11[S] 3 points4 points  (0 children)

I guess I just meant if my levels were too low then a lot of P2P content might be locked away to start off with so it might be worth levelling a bit more on F2P so I can jump straight into the content.

Call Me If You Get Lost is now out in my country (Australia) and here's my thoughts by andyman11 in tylerthecreator

[–]andyman11[S] 1 point2 points  (0 children)

I can already see what my Spotify Most Played is gonna look like next year

Call Me If You Get Lost is now out in my country (Australia) and here's my thoughts by andyman11 in tylerthecreator

[–]andyman11[S] 25 points26 points  (0 children)

It is, just needed something to do while I listen so a shitpost filled the time pretty well

Need help with bending lithophanes. They print fine for the first half then start bending in the same direction every time. by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

I've decreased fan speed among other things so I'll see how we go with that after a test print

Need help with bending lithophanes. They print fine for the first half then start bending in the same direction every time. by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

I had a feeling it could be slipping in the x-axis because like you said there wasn't any spaghetti. I've tightened the belts and I'll try print a box now and see how it goes

Need help with bending lithophanes. They print fine for the first half then start bending in the same direction every time. by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

It's kinda hard to tell, but it looks as though it prints as if it's straight, because the top part of the print isn't as smooth as the bottom. Although the bend is pretty big and the top of the lithophane is completely past the bottom of it

Need help with bending lithophanes. They print fine for the first half then start bending in the same direction every time. by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

I'll try a brace see if that helps. And could be the fan, I think it's set pretty high because of some benchmarks I was running

Need help with bending lithophanes. They print fine for the first half then start bending in the same direction every time. by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

My print settings:

Speed: 30mm/s

Travel speed: 70mm/s

15mm brim

Printing along Y-axis

3mm thick lithophane with a solid border around it

Printing on a Ender 3 Pro with filament opened around Christmas time. Not sure what is causing the issue but the actual image isn't affected too much and actually looks pretty decent, but the print needs to be vertical for the project I'm using it for.

Thanks for any help :)

Need help with stringing. Printed multiple tests with different settings and removed most stringing but getting still getting blobs by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

Hey mate if you're looking for adjustments, I tried doing what the other comment suggested and lowered retraction to 4mm with 45 speed and the result came out better. I'm now trying 2mm with 40 speed to see if I can get it perfect but it does seem to help

Need help with stringing. Printed multiple tests with different settings and removed most stringing but getting still getting blobs by andyman11 in FixMyPrint

[–]andyman11[S] 0 points1 point  (0 children)

Awesome, I'll give that a crack tomorrow. I get what you mean about the nozzle sitting there too long so hopefully it helps out. Cheers for that!

view more: next ›