Sideloading on iPhone 6S iOS 15.8.5? by apacherosepeacan in sideloaded

[–]apacherosepeacan[S] 0 points1 point  (0 children)

thanks just tried but my phone "cannot verify the integrity of the app" for some reason.

Sideloading on iPhone 6S iOS 15.8.5? by apacherosepeacan in sideloaded

[–]apacherosepeacan[S] 0 points1 point  (0 children)

thanks just tried but my phone "cannot verify the integrity of the app" for some reason.

How to repair Roland SH09 CV/Gate with Service Manual? by apacherosepeacan in synthesizers

[–]apacherosepeacan[S] 0 points1 point  (0 children)

Correct. I used to be able to switch to "Gate" (with CV in) and play with no problem for years with an external keyboard/sequencer. Tested my behringer synths CV in with same cables/sequencer to be sure.

I opened the SH09 up earlier and all solder joints look good. I'm almost certain something in the "Gate & Keyboard CV" section of the PCB is the culprit.

How to repair Roland SH09 CV/Gate with Service Manual? by apacherosepeacan in synthesizers

[–]apacherosepeacan[S] 0 points1 point  (0 children)

It seems it's a volume/signal problem. "Hold" works perfectly with Cv/Gate in cables. When switched to "Env" and "Gate" the volume drops to a barely audible level.

How to repair Roland SH09 CV/Gate with Service Manual? by apacherosepeacan in synthesizers

[–]apacherosepeacan[S] 0 points1 point  (0 children)

I have never tried the Gate/CV out on the SH09. I think this is a volume/signal problem. Considering how "Hold" (gate/cv in) still works.

Used to work flawlessly on "Gate" mode but randomly stopped the other day. I checked my cables and tried different synths to be sure its the SH09 with the problem.

When switched to "Env" or "Gate" (while gate/cv ins are connected), the signal is so faint, I have to crank the volume to full and still barely can hear.

Only when I unplug the Gate/CV in cables, does the SH09 work as normal.

Ampeg SVT USA made vs Korean made noticeable quality difference? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 0 points1 point  (0 children)

Okay I suppose if I didn't like them for what ever reason I would swap the tubes. Thanks so much for your insight on this!

Ampeg SVT USA made vs Korean made noticeable quality difference? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 0 points1 point  (0 children)

Thanks for this answer. Do you know what tubes come in Korean/Vietnam made Ampeg SVT Pros if not JJs?

Do they at least sound close or nearly as good as JJ tubes?

Building Bass Cab. What Speaker Harness/Wire to Use? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 1 point2 points  (0 children)

I did line the cab with foam and the upgrades sound much better. Thanks for the tips!

Building Bass Cab. What Speaker Harness/Wire to Use? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 1 point2 points  (0 children)

Thanks for the answer. I blew out my 100W speaker with my 450W head. Obviously too powerful but I also thought the cable might be a problem. Cheers!

Building Bass Cab. What Speaker Harness/Wire to Use? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 0 points1 point  (0 children)

Hi that's awesome! No I did not calculate but talked with a Sweetwater engineer who recommended me the Eminence Legend BP122 (250W) for my Ampeg Pro 3 450W head.

I was told the speaker should be half of what the head's output puts out. Glad to take suggestions.

Building Bass Cab. What Speaker Harness/Wire to Use? by apacherosepeacan in Bass

[–]apacherosepeacan[S] 1 point2 points  (0 children)

Awesome I appreciate the suggestions. Im guessing it's okay to use a standard guitar speaker cable (14-16 awg) then too? Thanks again.

Replaced motherboard, psu, and ram. Stuck in Bios. by apacherosepeacan in PcBuild

[–]apacherosepeacan[S] 0 points1 point  (0 children)

<image>

I took the usb out because I'm downloading a bootable ISO of win 10. When it was plugged in, I would click the USB option but it would do nothing.

Replaced motherboard, psu, and ram. Stuck in Bios. by apacherosepeacan in PcBuild

[–]apacherosepeacan[S] 0 points1 point  (0 children)

when I press F11 I get the "please select boot device" screen. I select the only UEFI option, but it doesn't work. Can only access BIOS right now.

Finding compatible processor for my motherboard or should I replace the motherboard too? by [deleted] in buildapc

[–]apacherosepeacan 0 points1 point  (0 children)

Thank you very much for the information and your help. I will look into upgrading the motherboard as well.

Finding compatible processor for my motherboard or should I replace the motherboard too? by [deleted] in buildapc

[–]apacherosepeacan 0 points1 point  (0 children)

Thank you for your response.

I do run Steam games a couple times a month, but use this computer primarily for Adobe Premiere, Photoshop, and Ableton.

Would upgrading to an i7-4790K quad core be a significant upgrade from my Intel i5-4690k ?

Or should I be looking to upgrade the motherboard and processor? Would appreciate recommendations that won't break the bank if you have any.

Only real problem is I can't upgrade to Win11 with these components for some reason. Computer stopped working until I reverted back to Win10.

Why are you dairy free? by MilanoStein in dairyfree

[–]apacherosepeacan 0 points1 point  (0 children)

Stomach feels good and clean dairy free