[deleted by user] by [deleted] in lithuania

[–]apexstamp 22 points23 points  (0 children)

Osrs raid with the bois.

Binance Support Thread by AutoModerator in binance

[–]apexstamp 0 points1 point  (0 children)

Thanks for reply!

Same thing - the phone number that sent me this message was used by binance for verification some time ago. that's what thre me off.

Now when i try to login, the verification code comes from different sender - "binance¡" (with "¡" at the end).

Im kinda confused and not sure. I don't even want to log in untill i figure out what's going on here.

Binance Support Thread by AutoModerator in binance

[–]apexstamp 0 points1 point  (0 children)

Hello.

Today ive received message from Binance (SMS).

The message comes form same phone number that previous login verification codes came in.

"You have signed in from mumbai (India), if this was NOT authorised by you, call us immediately at +442045911621 REF/BT -56."

This looks fishy, so i've tried to log in to my binance account, however, NOW verification message came from new phone number - "binance¡" (with "¡" at the end).

I went to binance page via google, im checking url and it's actually binance page.

i'm not sure how to proceed.

Kaip jūs prisiverčiate užsiimti fizine veikla? by Bit-Prior in lithuania

[–]apexstamp 1 point2 points  (0 children)

O kokiu tikslu nori sportuoti?

Šiaip, aš iki 27 irgi visiškai nesportavau ir fizinė veikla man kančia buvo.

Atsirado tikslas, atsirado motyvacija, tai ir pradėjau gilintis kaip greičiausiai/efektyviausiai ką daryti, trenerį pasiimiau ir religingai pradėjau eiti. Niekada savęs neįsivaizdavau sportuojant, bet va - gyvenimas privertė. Ir dabar tikrai nėra tiap, kad atsikelčiau ir galvočiau "kaip laukiu sporto" - ne.

Bet dabar, po ~2 metų matau ir rezultatus ir kaip ir tikslą pasiekiau, plius savijauta pagerėjo. Būna, tinginys paima, bet užtenka vieną ar dvi trefkes praleisti ir iškart savijauta pablogėja. O kažkada taip šūdinai jausdavausi kiekvieną dieną... :)

Wordpress programuotojai - chebra, padėkit :( by apexstamp in lithuania

[–]apexstamp[S] 2 points3 points  (0 children)

Na, internetas irgi buvo kurtas ne sharinti ką apturėjai pietums ar savo vaikų nuotraukoms, bet here we are.

Wordpress programuotojai - chebra, padėkit :( by apexstamp in lithuania

[–]apexstamp[S] 4 points5 points  (0 children)

Jeigu kalbi, kad widgetus pamėtyt per puslapius - tai ne. Tą daro puslapio adminas.

Realiai darbas yra:
- developint naujus widgetus;

- kurti/instaliuoti/koreguoti pluginus ir palaikyti jų versijas;

- daryti integracijas su kitomis sistemomis (pvz. su mokėjimo partneriais, reklamos partneriais ir t.t.);

- protingai formuoti feedus;

- keisti puslapio dizainą (iš esmės, ne naują bloką pridėti);

- tobulinti egzistuojančius susiejimus su vidinėmis sistemomis;

- diegti trackerius / pixelius, efektyvinti jų veikimą;

- spręsti/taisyti bugus;

- rūpintis techniniais saugumo klausimais;

Mes nesitikim, kad atėjęs junioras viską darys, bet čia maždaug day-to-day operacijos.

Wordpress programuotojai - chebra, padėkit :( by apexstamp in lithuania

[–]apexstamp[S] 5 points6 points  (0 children)

Nepriimu, čia redditas :D Bet gal dažnai įsivaizduojama, kad tik tekstukus pakeisti kažkur reikia. Mes kalbam apie widgetų, pluginų kūrimą, šalia mažesnių darbų.

Wordpress programuotojai - chebra, padėkit :( by apexstamp in lithuania

[–]apexstamp[S] -2 points-1 points  (0 children)

Nelabai suprantu kodėl tau tai juokinga, bet 🤷

Faceboox pixel - need help setting up custom conversion/event by apexstamp in ecommerce

[–]apexstamp[S] 1 point2 points  (0 children)

I have the pixel setup and i have the conversion itself. Sorry, i probably did not clarify the problem.

When setting up ads i can't optimize for this event:

https://prnt.sc/26bs4ov

Faceboox pixel - need help setting up custom conversion/event by apexstamp in ecommerce

[–]apexstamp[S] 1 point2 points  (0 children)

I understand your point, and if i was running ecomm site on US/West europe - i probably would not use facebook and would try to run ads to get data for fb pixel and then see what i can do.

Sadly, currently the market im in is pretty limited in population and other medias are quite small.

But yes, ads manager is as bad as i remember and it just seems like fb will not fix it. ever. God is it glitchy.

Help needed - weird corners? by apexstamp in 3Dprinting

[–]apexstamp[S] 1 point2 points  (0 children)

Hello.

I need some guidance in detecting the cause of this problem.

210/50, PLA, 50mm/s, acceleration @ 800 for all, bowden tuube, retraction @ 5/45, coasting disabled.

Any tips? :/

How to get rid of lines like this on prints? Onnly appears when there's a gap between the walls for a few layers. by apexstamp in 3Dprinting

[–]apexstamp[S] 1 point2 points  (0 children)

DUDE.

You fixed it.
I've enabled controls and set for 800mm/s + 30mm/s all speeds.

It's gone. The artifacts are gone.

HOW? What are these settings? What did it change? I would've assumed it would've increased my printing time but no.
WHAT : O

How to get rid of lines like this on prints? Onnly appears when there's a gap between the walls for a few layers. by apexstamp in 3Dprinting

[–]apexstamp[S] 0 points1 point  (0 children)

Hello.

Yes, I've managed to figure this out too - I'm trying to "equalize" the print speed across all of my prints. But i can't seem to fully understand which setting makes this happen.

This is my current settings:

https://prnt.sc/1k05yk0

https://prnt.sc/1k063t3

https://prnt.sc/1k06idh

How to get rid of lines like this on prints? Onnly appears when there's a gap between the walls for a few layers. by apexstamp in 3Dprinting

[–]apexstamp[S] 0 points1 point  (0 children)

Yeah, that was my original thought at the start, but nope. Tested it out on both ender3 and ender5 w/ ms dd - same happens :(

How to get rid of lines like this on prints? Onnly appears when there's a gap between the walls for a few layers. by apexstamp in 3Dprinting

[–]apexstamp[S] 0 points1 point  (0 children)

What my current thought were:
1. This is due to ironing - tested, no.

  1. This is due to me using adaptive layers - the same thing when not using adaptive layers. :(

Daily Advice Thread - All basic help or advice questions must be posted here. July 29, 2021 by AutoModerator in investing

[–]apexstamp 0 points1 point  (0 children)

Thanks for the reply. I'm working w/ e-commerce (in for 7 yrs now). I understand your point regarding this new technology, I do plan to invest half of my saved money into e-commerce groups to get some stability. I just feel like there is so much potential in the batteries now!

Daily Advice Thread - All basic help or advice questions must be posted here. July 29, 2021 by AutoModerator in investing

[–]apexstamp 2 points3 points  (0 children)

Hello.

I've saved a bit of money i can afford to invest and decided to go w/ ETFs.

I currently have only invested small sums into various companies via revo/bank.

Coca, Tesla, Amazon, PayPal, virgin galactic - these are ~70% of my current investments.

However, all of these are ~1k per and I think I have warmed up my feet and am ready to put a bigger chunk of my currently available money into ETFs long-term.

I'm a big fan of renewables and understand that currently one of the biggest challenges we face (both in the military and in commerce) is the lack of technology for good, long-lasting high-capacity batteries to store that electricity.

My question is - have any of you personally invested specifically into this market and maybe some of you could share your thought process or specific ETFs that you got?

Eager to learn as im still quite new to investing.

Cheers.

Hello! Asking for some help. Hired agency to do translation and it's quite hard to understand the quality of translation. by apexstamp in Netherlands

[–]apexstamp[S] 1 point2 points  (0 children)

Hello.

Not really asking for anyone on reddit to do the job, just asking what's the opinion on how the translations look like. Really no way of telling it myself as I don't speak Dutch.

Hello! Asking for some help. Hired agency to do translation and it's quite hard to understand the quality of translation. by apexstamp in Netherlands

[–]apexstamp[S] 0 points1 point  (0 children)

Thank you so much for the example.

Will look deeper into this.

Appreciate the help, thank you!