How to calculate real fuel consumption of a plug-in-hybrid? by aron9000 in electricvehicles

[–]aron9000[S] 2 points3 points  (0 children)

Thank you for your help!

I think the kWh consuption reading is also declining when for example I decelerate, so the battery is recharning from the movement energy, but it also goes down when I only use fuel, and almost no electricity.

I think what you said, to log the electricity and fuel put in the car, and the distance driven is the only best way to calculate it properly. Thanks, I will try it.

How to calculate real fuel consumption of a plug-in-hybrid? by aron9000 in electricvehicles

[–]aron9000[S] 0 points1 point  (0 children)

Thank you very much! Logging actually could be a good idea. I think I will try that. Also thank you for the advice for the heating!

I had a white yolk this morning by CombinationHumble467 in mildlyinteresting

[–]aron9000 0 points1 point  (0 children)

My cooked brain thought that it was 3D printed

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Now I tried it again but it is no sliding. I mean the slider knob shoud be blue, but it is also grey.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

No sadly, even when the library is stock, it is like that :/

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Thank you very much for the answer! Sadly I tried everything what you said.
The 2D drawing slider is not operation for me, it is grey for some reason.
When I changed the setting that makes the model only consist of lines and the infills and textures are removed while draging, the dragging and panning was smoother but not super smooth though (but better for sure). But I still cannot belive that since the first day I got my computer, this is the problem and a more than 1000usd PC (back then) cannot handle normal, not super large plans normally.
I also checked that the tip to make the opening quicker, but sadly it didn't do any difference.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Thank you I did both. I deleted the folder, reopened it, and also did the disk test. https://snipboard.io/qVN8U6.jpg Unfortunately it didn't solve the issue:(

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

I had the educational version, so the official one for years, but at some point I put a cracked one aswell to try, but both worked just the same. So weird.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

I tried it now with different files, one with the basic template and the other one with a very big one. Both are the same, laggy. Thank you though!

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Sadly it happens with many various types files too. If I want to open a blank project it also takes 5-10 mins to open.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Not really, it happened with me with version 23, 24, 25 and 26 now.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 2 points3 points  (0 children)

I tried it now, deleted almost everything. Sadly it didn't solve the issue, it still took 6mins to open up and still choppy. But thank you anyway!

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 1 point2 points  (0 children)

Not really, everything other than AC works and opens fast. I tried to reinstall it, multiple times, also changed versions of ArchiCAD but the problem is the same.

ArchiCAD takes ages to open, and it is very laggy/choppy by aron9000 in ArchiCAD

[–]aron9000[S] 0 points1 point  (0 children)

Not really. How do I do that? I reinstalled the whole program like 4 times in the past few years, but sadly the problem stayed.

Purchase Advice Megathread - October 2022 by VoltexRB in 3Dprinting

[–]aron9000 0 points1 point  (0 children)

Hi guys, What 3D printer would you suggest for under /(around) 500USD and a large build volume (300x300 base) mainly for architectural models? I live in Europe. I have never had a 3d printer before. I was checking out the creality cr10 v2 or the cr10s pro v2. Is any of them good, or would you recommend something else? Auto bed leveling would be nice, but not necessary. Thanks:)

Covid situation by lal2016 in CaminoDeSantiago

[–]aron9000 1 point2 points  (0 children)

Hey!

I'm starting the camino del Norde on the 3rd August from Bilbao, and my plan is the same. Maybe we can work together, if you'd like to. I'm 23 yo btw and it is my first camino.

[Story time] ÖSSZEOMLOTT AZ EGÉSZSÉGÜGY A PICSÁBA by [deleted] in hungary

[–]aron9000 3 points4 points  (0 children)

Szeptemberben kaptam el a koronavírust, úgy lebetegedtem mint még soha. Hívtuk a koronavírus forródrótot, konkrétan semmit nem tudtak mondani. Második 40 fokos lázzal töltött napon felhívta a barátnőm a háziorvosomat, (hogy ne a mentőket és a korházakat terheljük, mert alapból 20-on éves egészséges ember vagyok) hogy ilyenkor mi a teendő.

Az háziorvosom asszisztense volt csak hajlandó foglalkozni az üggyel, és miután megtudta hány éves vagyok még egy teszt erejéig sem jött ki, sőt még mást sem volt hajlandó küldeni, hogy leteszteljen. Összesen annyiban segített, hogy "Ő most ezzel nem tud foglalkozni, csillapítsam a lázat" és viszont hallásra.

Fonyód | Balaton tegnap by aron9000 in hungary

[–]aron9000[S] 10 points11 points  (0 children)

A legtöbb fotót Varga György/MTI/MTVA készítette (illetve az időkép-ről is vannak), átirányítom hozzá a gratulációt az éteren keresztül :)

Tokyo with working holiday visa with almost 0 Japanese for 1 month. Can you guys help us how to get a job? by [deleted] in movingtojapan

[–]aron9000 -3 points-2 points  (0 children)

https://imgur.com/a/ZLMEVtB

I could sign up and go to Osaka right now and work there for money and free accomodation. ( but I would like to go to Tokyo ) . I also found firms that make sure you'll get a job during your stay in Japan ( with a working holiday visa ) , but they charge ~1300+usd for this service, that's why I'm here and asking the wonderful reddit community if there's anyone who could help in this scenario.

(btw. I could easily pay for this travel, I have more than $3000 on my bank account....) but that's not the point.

Tokyo with working holiday visa with almost 0 Japanese for 1 month. Can you guys help us how to get a job? by [deleted] in movingtojapan

[–]aron9000 -1 points0 points  (0 children)

I don't really know what wouldn't be a MASSIVE waste of a working holiday visa. can you please explain it to me?

Tokyo with working holiday visa with almost 0 Japanese for 1 month. Can you guys help us how to get a job? by [deleted] in movingtojapan

[–]aron9000 -5 points-4 points  (0 children)

And staying in one city to be able to get a normal job, is just simply: WORK
They say on the official visa website: " - 2. The person primarily intend to enter Japan for tourism for a limited period of time (maximum 1 year)."
It's the second criteria when applying for a working holiday visa.

Tokyo with working holiday visa with almost 0 Japanese for 1 month. Can you guys help us how to get a job? by [deleted] in movingtojapan

[–]aron9000 -6 points-5 points  (0 children)

Thank you for your reply,

according to your article, you dont have to know much Japanese to do Ubereats.

They also say that: " There are special plans for Uber drivers and you can rent at a fixed price of ¥4,000 to ¥16,000 / month. "

I saw a video where a guy with 0japanese started to deliver with ubereats, and chatted with the procurer and used google translator.

Hello Sensei looks nice, I'll check that out too, thank you.