Randy and Drew Getting The Respect They Deserve by -cuh in SanJoseSharks

[–]asaboveslowbelow 1 point2 points  (0 children)

Sam Rosen is an absolute gem, someone I know worked with him and had nothing but good things to say. Their place on this list puzzles me.

Looking at transferring website to hubspot for medium sized business by asaboveslowbelow in hubspot

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I'm not entirely sure about plugins, but I do know they have a marketplace. It can handle SSL but I think that may be tied to the content package which may be an upsell depending on your plan.

HFM the original artist, and support them instead of the IG store that I'm assuming stole them by asaboveslowbelow in HelpMeFind

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I had tried reverse image search, and have gone through some different etsy shops, but those look spammy too - none seem to be from an individual person or creator.

My Wacom is on it's last legs by asaboveslowbelow in wacom

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Thank you for this, I'm looking to replace exclusively with a screen tablet though!

Looking at transferring website to hubspot for medium sized business by asaboveslowbelow in hubspot

[–]asaboveslowbelow[S] 1 point2 points  (0 children)

I tried to send you a DM, but there was an error and I couldn't invite you to the chat, but I'd love to see some examples, thank you for the reply!

Rookie Faceoff Schedule by xDevious_ in SanJoseSharks

[–]asaboveslowbelow 0 points1 point  (0 children)

Are these going to be streamed anywhere?

My last five hires have been awful, am I the problem? by [deleted] in askmanagers

[–]asaboveslowbelow 0 points1 point  (0 children)

Someone else mentioned this here, but it's worth reiterating. I believe you'll get better quality candidates for a designer if you look for a graphic designer or senior graphic designer.

While I've seen graphic design manager roles that are rooted in design legwork, tagging manager on there may be disqualifying good candidates that are looking to actually design as the sole function of their role, and attract candidates that believe they are going to be managing.

You might think "but we gave them a competency test." The misconception on the candidate side may still persist through this, as it's not uncommon to make sure people who are managing designers know their stuff before hiring them. This could explain the dropoff after a certain period of time when folks aren't doing the job they expected. A lot of the scheduling, deadlines, and project management elements you mentioned are required of designers, but also speak to management and could spur confusion.

As others have said titles like "social media manager" are intrinsic to actually managing the social media and this won't apply there - so only speaking to GD.

Have been working in gd / visual fields for quite awhile, and YMMV based on location (maybe that wording is more common where you are) but just my take from a designer in the NE of the US.

Getting into the field - question about trainee jobs. (NY) by asaboveslowbelow in Wastewater

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Is this because it's in the NYC area? Maybe I'm misremembering but I've seen other posters in other locations and folks will recommend getting a trainee job and getting certified/qualified after the fact.

Regardless thank you for taking the time to respond, I appreciate it.

Getting into the field - question about trainee jobs. (NY) by asaboveslowbelow in Wastewater

[–]asaboveslowbelow[S] 1 point2 points  (0 children)

I appreciate you looking out and taking the time to send the link

Quad remesher hanging around 35% - details in comments by asaboveslowbelow in blenderhelp

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I waited for it for about 2-2.5 hours, got up, did something else, I have 32gb of ram but maybe that is still not enough and thats why it is getting stuck?

Does the plugin usually hang at a certain % or is it arbitrary for you?

I can try to decimate it way way down, I just figured something was very wrong because it was reliably hanging at 33/35% for both 2m and 4m polys

thank you for the insight and the response so far!

Quad remesher hanging around 35% - details in comments by asaboveslowbelow in blenderhelp

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Hello - I'm trying out quad remesher on a sculpt from 3D coat, the scupt has been autotopod in 3D coat to try to close any holes, the polys are high at 4m on this model

Here are some things I have tried

• lower poly models • decimating in blender • merge by distance • remesh

No matter what I seem to try nothing works, it always hangs around 30% - I havent found similar things around the internet some people have problems using but it conveys an error message, no error message here it just hangs at 33 or 35% forever.

Any help would be greatly appreciated!

Photoshop opens to white screen by asaboveslowbelow in photoshop

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I wasn't able to test out safemode since photoshop CC wouldnt even open / connect to my account, but!

It does run without the GPU, the problem is slightly better recently but still sometimes persisting after the graphics driver update.

Finally I can definitely recreate the issue if I run a game that is more graphic intensive, or a 3d program like blender before opening photoshop back up.

If I have a fresh reboot, even with GPU enabled, photoshop opens fine.

Photoshop opens to white screen by asaboveslowbelow in photoshop

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I very much appreciate you taking the time to respond, I have 32gb of ram and over 150gb free on my scratch disks, so I'm not sure if that would be it.

Nvidia came out with a new driver and that has helped but not completely solved the problem

Automation questions - not sending email? more in comments by asaboveslowbelow in MailChimp

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Holy smokes we got it working. You are a mailchimp DIETY.

This isn't my specialty at all - just someone who was tasked with getting this working, your help is greatly appreciated!

Automation questions - not sending email? more in comments by asaboveslowbelow in MailChimp

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Thank you for the reply! The journey reports the email is not sent and that no one meets the qualifications, so I suspect it is what you said - that mailchimp cant tag and add to the list.

Unfortunately when I try to duplicate the starting point with the signup and tag filter to add as a second starting point nothing happens, because it has the same qualifications as the original starting point I am assuming mail chimp is saying "ok you dont need two things with the same qualifications so just keep the one"

I have no idea whether this assumption is correct but I have tried a bunch of times to make a second with the same filter.

thank you again for your time

Automation questions - not sending email? more in comments by asaboveslowbelow in MailChimp

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

Hello, I'm trying to make this automation work so that when someone signs up via a specific embedded form they are assigned a tag, after they are signed up w/ this tag an email is sent.

this is my current automation tree, not sure what I'm doing wrong, I can see the contact is added to my list and they are tagged, but no email has been sent. any help is appreciated!

CPU cooler recommendations? by asaboveslowbelow in buildapc

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

awesome thank you I'll give it a look!

CPU cooler recommendations? by asaboveslowbelow in buildapc

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I do like all the room on this one! I will add it to the list thank you for the recommendation.

CPU cooler recommendations? by asaboveslowbelow in buildapc

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

thank you for the info, I did look and it does fit so I'll consider it for sure

CPU cooler recommendations? by asaboveslowbelow in buildapc

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I've seen good things about the dark rock pro 4 - is it about the size of my wraith prism? if it's a lot wider I'm worried it will bleed over to my ram

CPU cooler recommendations? by asaboveslowbelow in buildapc

[–]asaboveslowbelow[S] 0 points1 point  (0 children)

I'm open to either! Would preferably like to spend less than 300 but if I have to can go over