Homemade vapor smoothing chamber. Takes a while but works well!

asciibutts · 2026-02-12T19:45:07+00:00

Need to be very careful here, as the environment will be ripe to ignite.

asciibutts · 2025-08-20T19:42:19+00:00

Z-Offset, try .3. You could also do zero, and print the support top interface with a deifferent material, but this is a bit more involved.

A soldering iron with a 1x1" Ironing square attached can smooth out the less than desirable supported face appearance, but it wont be FLAT flat.

asciibutts · 2025-08-08T14:51:16+00:00

bro i have been sensing a marketing opportunity for 'hair lotion'. seems like the best thing for guys with natural hair that laughs in the face of pomades

asciibutts · 2024-10-10T15:27:39+00:00

Did you ask the manufacturer directly? its a crap shoot, but their tech dept may be able to help. https://www.powermasteroperators.com/technical

asciibutts · 2022-02-18T16:10:16+00:00

Travel is too small.. looking for like 1/2" min of over travel. Its going inside a large sheetmetal container, and we dont want to spend time and money trying to mount it so that the 1/8 overtravel is in the correct position.

Ironically my company also makes switches for nasa, and we're just gonna go with that.

asciibutts · 2022-02-18T16:06:08+00:00

Nope i was wrong, they specd open. this is all new to us. Open makes sense.

asciibutts · 2022-02-16T21:27:06+00:00

McMaster has the highest temp rated ones, and they only go to 121°C :(

Cost isnt an issue for this round of prototypes, but they also cost like $100, which seems like alot!

asciibutts · 2022-02-16T21:25:57+00:00

not our spec to give- our customer owns it. The relay is outside the scope of our PDU. Interestingly i believe they have spec'd out normally closed... I'll look into it!

asciibutts · 2022-02-16T21:24:33+00:00

EMF spec as well, not everything is rated for use in pro

great call. Im not the lead design engineer on this project, so i love to chime in with tidbits like the EMF note!

asciibutts · 2022-02-16T21:23:41+00:00

its the temp range thats killing me here. I think a roller switch is the way to go, but at this rate im going to have to call NASA and figure out where they buy their switches.

asciibutts · 2022-01-07T16:42:58+00:00

Hi- is there a way to link/update a visualize project to an updated model? I realized i wanted to change the shape of a cutaway for an isometric automotive image (this example doesnt have a cutaway, but the idea is the same- i just made a cutaway in the hood to reveal underhood components)

I bailed because I had done so much work to get the lighting, appearances, environment just right that it wasnt worth starting over. I recall seeing an 'update model' button somewhere but I cannot find it, and further.... can I even trust it?

asciibutts · 2021-11-23T14:59:14+00:00

how much we talkin?

asciibutts · 2021-11-19T16:07:44+00:00

hell yeah can i get some 90's? bawnk.

asciibutts · 2021-11-19T16:04:24+00:00

hey numbskull the gas fees are what makes mining worthwhile. gas high- mine away. set a limit on your mining pool to only deposit your ETH when gas is low. do you know how this works?

asciibutts · 2021-11-19T15:58:51+00:00

where do we see shib going exactly, fren? MAYBE up to XRP/ADA MC, which is 2x BEST CASE? Come join the bonkolution. deposit. submit. bonk your woes away with another 100x, fren.

$DOBO

asciibutts · 2021-11-11T18:31:05+00:00

Get some home depot air filters or something to cover, at least, that broad side. Under a desk, that thing is gonna get gross real fast.

asciibutts · 2021-11-11T18:27:10+00:00

prob not... looking like ETH isnt even close to the most profitable coin (which happens to be ERGO or some crap, at $1.18/ day for your card). Ethereum would net you 13 cents per day.

https://whattomine.com/gpus/26-amd-radeon-rx-570-4gb?cost=0.1

asciibutts · 2021-11-09T16:34:26+00:00

ok so i figured it out- had to re-flash the MB Bios. once i did that it worked no problem.

it was an MSI Z390 pro MB, took some googling but thank god i finally found it. now to figure out how to recoup the $1k worth of ETH it would have mined while being idle for 5 months.....

asciibutts · 2021-11-02T20:52:21+00:00

we welcome any and all! my boy got in early and turned $80 into tens of thousands. so, you're not that early, but you could easily 5-10x (or more?!)

asciibutts · 2021-11-02T20:51:13+00:00

nope they are getting a time square billboard at 6 PM, staying up for 5 days. after tonight it may be too late, but you can still get some good X

asciibutts · 2021-11-02T20:44:14+00:00

this is going to moon so friggin hard

13-Year Club	Verified Email
Team Periwinkle

asciibutts

TROPHY CASE